All posts by Djamel

Soapy Heart of Soap

Soapy Shape of Soap
Soapy Storyboard of Soap

Section I: Distance Sensor HC-SR04 (Input)

After discarding several ideas for the input – e.g. infrared remote controls, magnetic wristbands, etc. – we decided to use an simple distance sensor for the interaction input of our soap.

Our choice was the HC-SR04, a distance sensor which is common and wide-spread in combination with an Arduino Uno. This kind of sensor uses ultrasonic transmitters for the range calculation, which is in favor for the usage on stage where light-based solution would have problems. It can measure objects with no direct contact in front of it within a range from 2cm up to 400cm and an angle of 15°, so in this case it also fulfills our requirements of triggering the soap. For the test setup i energized it via the 5V connection on the Arduino board.

The test setup includes:

  • 1x HC-SR04, the distance sensor itself
  • 2x LED (green and red)
  • 2x 560Ω resistor
  • several jumper wires
Test setup for the HC-SR04

So while nothing interferes in the predefined range (i set it to 4cm for testing purposes), the green LED will be on. In the moment a object will undercut this range, the green LED goes off and the red LED lights up.

IMG_20150107_172753
Object not in range, green LEDs is on
IMG_20150107_172802
Object in range, red LED is on

Section II – Soap Bubble Gun (Output)

As the first interaction output we asked ourselves how we can present the imagination of a soap although it doesn’t has the appearnance of it. We almost immediately thought about soap bubbles. This suggestion went through the whole concept phase and was getting elaborated quickly. We decided to use a common soap bubble gun. It was dismantled by its case and powerd by a seperate 4.5V power supply. The basic idea was to put it into the middle of of our soap and let it being triggered by the distance sensor thus soap bubbles will rise in the air when it gets activated. When activated the DC servo motor in the gun will fulfill two tasks. On the one side it will pump the soap liquid through little elastic tubes to the emmision ring of the gun. On the other side, the motor will run a little ventilator which will blow air through the mentioned ring. This is how soap bubbles are born!

For a first test setup controlling a DC motor i used:

  • 1x DC motor, a seperate one from an Arduino Experimantation Kit
  • 1x transistor (PN2222), has the function of an electronic switch
  • 1x 1kΩ resistor
  • 3x 1.5V power supply
  • several jumper wires
Test setup for the motor control via Arduino

 

2nd setup, using the soap bubble gun this time:

 

3th Setup, seperate DC motor with the HC-SR04:

 

4th Setup, soap bubble gun with the HC-SR04:

Currently we have an issue with the estimated 4.5V regularly dropping to a less amount when connecting the soap bubble gun to the circuit. This strange behaviour only occurs with the DC motor of the gun, not with the seperate one. This problem has to be investigated further and prevents the soap bubble gun from prototyp status.

Section III – LED Strand WS2801 (Output)

As the second output we want to use RGB LEDs. As the soap bubble gun they should light up the case of the soap when the distance sensor is triggered.  We used the LED Strands WS2801 and LPD6803 as first hardware subjects and used the tutorial provided from Adafruit. For my case the strand has to charged mobile via battery. Since the strand needs a working voltage of 5V and we only had a 3 Cell 11.1V battery available, i had to use a simple voltage converter to reduce it to the needed amount. The strand uses 4 wires – power supply, ground, data and clock. The final aim is to let them flash in foam-like colors e.g. white and different kinds of blue.

IMG_20150120_155418
LED Strand WS2801
The soap enlightened in foamy colors

Currently we have the issue that we can power up the strand propably with 5V but can’t control it. Still after double checking the connections and wires, basic examples e.g. flashing the strand with a single color won’t work although color examples will flash the LEDs uncontrolled. We worked with different libraries with no success. We assume that the wires don’t match as stated in the tutorial and/or are broken. We consider to work with another one from now on, so work-in-progress…

Michael Kohlhaas: A Costume Observation

Piece: Michael Kohlhaas | Theaterhaus Jena

Text/Direction: Hannes Weiler | Stage: Florian Dietrich | Costumes: Bettina Werner | Dramaturgy: Friederike Weidner


Focus on  Leander Paul Gerdes 

Photographer: Joachim Dette

Photographer: Joachim Dette

Photographer: Joachim Dette

Photographer: Joachim Dette

What is the costume?

  • black boots
  • black trousers
  • shirt with a red-black camouflage pattern
  • red jacket with metallic knobs and white collar
  • long black leather coat
  • red “crown” consisting of branches, leaves and feathers

The costume of Leander Paul Gerdes doesn’t alter much during the play. He discards his leather coat after its first apperance, it will never be worn again. The red coat with its white lace collar represents his permanent restlessness and anger about authorities. The costume gets its “crown” in the scene where Kohlhaas burns down several cities. It has only a short scene time but nevertheless has a strong visual impact for the audience. It can be seen as a symbol of the anger, pain and desperation he is going through after the loss of his horses, seeing no other option as pure destruction.


Focus on Matthias Zera

Photographer: Joachim Dette

Photographer: Joachim Dette

IMG_8996Photographer: Tamim

What is the costume?

<text>


Focus on Roland Bonjour

Photographer: Joachim Dette

IMG_9001Photographer: Tamim

Photographer: Joachim Dette

What is the costume?

<text>


Focus on Anna Greta Weber

Photographer: Joachim Dette

IMG_8987Photographer: Tamim Tam

What is the costume?

<text>


Focus on Johanna Berger

IMG_8976Photographer: Tamim

IMG_9009Photographer: Tamim

Photographer: Joachim Dette

What is the costume?

<text>


Group Pictures

Photographer: Joachim Dette

IMG_9013Photographer: Tamim


Costume Sketch

sketch