104
edits
→Works
mNo edit summary |
(→Works) |
||
| Line 47: | Line 47: | ||
==Works== | ==Works== | ||
* Example (name, nickname or initials) [[/Projectname/]] | ====Cases for Microscope==== | ||
'''Approach by Jakob''' | |||
[[Image:Microscope-case-jakob-side-view.png|390px|thumb|right|Side view]] | |||
The basic idea of this concept is pretty simple: We are using two carriages (in German: Schlitten) which lie on one another where the contact surface is a plane in the angle of 15 degrees to the table. Pushing the lower carriage to the left will force the upper carriage to move upwards. | |||
For moving the lower carriage a simple and therefore cheap screw with an M6 thread is needed. One rotation about its own axis will move the lower carriage about 1 mm and thus the upper carriage about 0.25 mm. For the guideway (in German: Führung) we should use steel bolts which aren't expensive as well. We should be able to print all the other components with the 3D printer. | |||
If desired I can deliver more technical drawings with correct measurements but I guess this is not needed at the moment as we will re-design this approach anyway. | |||
[[Image:Microscope-case-jakob-rendered.jpg|800px|thumb|left|Rendered image]] | |||
<!-- * Example (name, nickname or initials) [[/Projectname/]] --> | |||
==Links== | ==Links== | ||