Automation/RaspberryPi: Difference between revisions

From Medien Wiki
Line 133: Line 133:


Note that the Raspberry is searching online for the current time when booting. If there is no Internet the time might not be accurate.
Note that the Raspberry is searching online for the current time when booting. If there is no Internet the time might not be accurate.
====Shut down at specific time===
The shutdown command has a timer built in, so when it is called like this
sudo shutdown -h 15:00
the system will shut down at three in the after noon.
sudo shutdown -h +30
will shut the system down in 30 minutes from now.
You can also set a cron job for shutting down on specific days at specific times.
sudo crontab -e
add this line:
45 18 * * * /sbin/shutdown -h now
to shut down 45mins past 6PM
[https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=59520 source]


[[Category:Automation]]
[[Category:Automation]]
[[Category:RaspberryPi]]
[[Category:RaspberryPi]]

Revision as of 07:24, 14 May 2015

The Raspberry Pi is an inexpensive Linux Computer which you can for example use to play back videos (up to Fill-HD). This page shows you how to set it up:

Making the RapberryPi run a video at startup

Install The Raspbian image (NOOBS is okay for the beginning, but it wastes a bit space on the SDcard for the recovery image which we don't need. Copy the raspbian on the card.

Once that is done, connect to the Internet (Ethernet + DHCP) and bring the OS up to date:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo apt-get install raspberrypi-net-mods

Test video playback: source

omxplayer /opt/vc/src/hello_pi/hello_video/test.h264

add option -r to change display frame rate and resolution to the one that the movie file has:

omxplayer -r /opt/vc/src/hello_pi/hello_video/test.h264

make a file startup_script.sh (shell script) with the following content:

clear
echo "Startup script running"
echo "some useful information here"
sleep 2
omxplayer -r movie.mp4 --loop

you will have to make this executable with

sudo chmod 775 startup_script.sh

and you can test if it works by running it

./startup_script.sh

Make it log in automatically

You don't want a password prompt when the raspberry boots source

Edit the inittab file.

sudo nano /etc/inittab

Disable the getty program. Find this line and comment it our by adding a # at the beginning of the line

#1:2345:respawn:/sbin/getty 115200 tty1

Add login program to inittab. Add the following line just below the commented line

1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1

This will run the login program with pi user and without any authentication

Save and Exit.

Make it start the script automatically:

sudo nano .bashrc

and right at the end put:

if [ $(tty) == /dev/tty1 ]; then
  ./startup_script.sh
fi

(that last 'if' makes sure the script is not starting in an x session)

Synchronizing multiple RaspberryPi

maybe you want to have the different Pi different host names, so you don't get confused

sudo raspi-config


install pexpect:

sudo apt-get install python-pexpect

install python bindings for DBUS https://github.com/LEW21/pydbus

sudo apt-get install python3-setuptools
sudo wget https://github.com/LEW21/pydbus/archive/master.zip
sudo unzip master.zip
rm master.zip
cd pydbus-master/
sudo chmod 777 setup.py
sudo ./setup.py build
sudo ./setup.py install


sudo apt-get remove omxplayer
sudo rm -rf /usr/bin/omxplayer /usr/bin/omxplayer.bin /usr/lib/omxplayer
sudo wget -O- http://yokto.net/0/omxplayer/omxplayer-3176db4.tar.bz2 | sudo tar -C / -xjvf -
sudo ln -sf /lib/arm-linux-gnueabihf/libpcre.so.3 /lib/arm-linux-gnueabihf/libpcre.so.1
sudo wget -O /usr/bin/omxplayer-sync https://github.com/turingmachine/omxplayer-sync/raw/master/omxplayer-sync
sudo chmod 0755 /usr/bin/omxplayer-sync
sudo wget https://github.com/turingmachine/omxplayer-sync/raw/master/synctest.mp4


Make a local network, connect them with Ethernet cable (+Hub if more then two) and configure static IPs source

sudo nano /etc/network/interfaces

start on master:

omxplayer-sync -mubv synctest.mp4

start on slave:

omxplayer-sync -lubv synctest.mp4

-b flag to make screen background black

(remove v for verbose mode later once everything works)

Notes

other resources

Use multiple RasberryPis to make a video wall (needs one extra server-Pi, plus one Pi per client) Piwall

Backup and copy

let's say /dev/mmcblk0 is your card reader

make a backup of SDCard:

sudo dd if="/dev/mmcblk0" of="Pi.bin"

put backup on card:

sudo dd bs=4M if=Pi.bin of=/dev/mmcblk0

(both these commands take a long time and the terminal seems like frozen, there is no progress feedback)

Power

to switch on just plug in the power. Make sure HDMI is connected first and Beamer/Screen is on prior to plugging in the power, otherwise the screen might not be recognized.

reboot:

sudo reboot -h

shutdown:

sudo shutdown -h now

Set the time

dpkg-reconfigure tzdata

Note that the Raspberry is searching online for the current time when booting. If there is no Internet the time might not be accurate.

=Shut down at specific time

The shutdown command has a timer built in, so when it is called like this

sudo shutdown -h 15:00

the system will shut down at three in the after noon.

sudo shutdown -h +30

will shut the system down in 30 minutes from now.

You can also set a cron job for shutting down on specific days at specific times.

sudo crontab -e

add this line:

45 18 * * * /sbin/shutdown -h now

to shut down 45mins past 6PM

source