GMU:Dataflow I WS12/Li Lingling: Difference between revisions

Line 9:

[[File:touch sensor2.jpg]]

[[File:touch sensor1.jpg]]

In my project I can get different data from Arduino to processing, when I touching the "Touch Sensor" . Then I will define different gestures. In my case the ~~information is divided into four categories~~.

In my project I can get different data from Arduino to processing, when I touching the "Touch Sensor" . Then I will define different gestures. In my case I have four gestures.

Because I want to use the different gestures to control the Gem object in pure data.

Gesture 1: No touching.

Gesture 2: One finger touching.

Gesture 3: Grab.

Gesture 4: Put the finger in the water.

[[File:touch sensor4.jpg]]

Because I want to use the different gestures to control the Gem object in pure data. So I name them "Go right"、“Go up”、“Go left”、“Go down”.

In processing the gesture data is remembered as numbers.

Gesture 1 is "0".

Gesture 2 is "1".

Gesture 3 is "2".

Gesture 4 is "3".

Then I send the gesture data to pure data through OSC. So in pure data I define the numbers with different movement.

"0" is "Go Left".

"1" is "Go up".

"2" is "Go right".

"3" is "Go down".

[[File:processing+puredata.zip]]

@@ Line 9: / Line 9: @@
 [[File:touch sensor2.jpg]]
 [[File:touch sensor1.jpg]]
-In my project I can get different data from Arduino to processing, when I touching the "Touch Sensor" . Then I will define different gestures. In my case the information is divided into four categories.
+In my project I can get different data from Arduino to processing, when I touching the "Touch Sensor" . Then I will define different gestures. In my case I have four gestures.
-Because I want to use the different gestures to control the Gem object in pure data.
+Gesture 1: No touching.
+Gesture 2: One finger touching.
+Gesture 3: Grab.
+Gesture 4: Put the finger in the water.
+[[File:touch sensor4.jpg]]
+Because I want to use the different gestures to control the Gem object in pure data. So I name them "Go right"、“Go up”、“Go left”、“Go down”.
+In processing the gesture data is remembered as numbers.
+Gesture 1 is "0".
+Gesture 2 is "1".
+Gesture 3 is "2".
+Gesture 4 is "3".
+Then I send the gesture data to pure data through OSC. So in pure data I define the numbers with different movement.
+"0" is "Go Left".
+"1" is "Go up".
+"2" is "Go right".
+"3" is "Go down".
 <videoflash type="vimeo">63046775</videoflash>
 [[File:processing+puredata.zip]]