Dania González Sanabria: Difference between revisions

Dania González Sanabria (view source)

Revision as of 12:51, 22 February 2025

198 bytes added , 22 February

info

Dania.gonzalez.sanabria

105

edits

@@ Line 49: / Line 49: @@
 ====== Embedded systems development ======
 In the project, were implemented two systems of sensors and actuators controlled by Arduino boards, and programmed in Visual Studio Code and Arduino programs.
+[[File:Imagen de WhatsApp 2025-01-09 a las 12.58.12 ce313d3b.jpg|alt=Sketch 2, Lemon tree archive, Dania González Sanabria|thumb|711x711px|Sketch 2, Lemon tree archive, Dania González Sanabria]]
+rts Board:
-rts Board: For the moving branch, it was set a system with an HC-SR04 Ultrasonic Distance Sensor controlling a Miuzei 15 kg Digital Servo Motor, through an Arduino Nano and a connective board. When the spectator approaches 65 cm of the branches, the servo motor starts to turn from 0 to 18 degrees, making the branches, attached to it, start to move. If the spectator approaches at a closer distance (50 cm), the servo motor turns from 0 to 40 degrees, making the branches move a little bit more. The Servo Motor received an extra supply of energy from an MB-102 3.3V/5V Power Module plugged into electricity and connected to the 2nd board.
+For the moving branch, it was set a system with an HC-SR04 Ultrasonic Distance Sensor controlling a Miuzei 15 kg Digital Servo Motor, through an Arduino Nano and a connective board. When the spectator approaches 65 cm of the branches, the servo motor starts to turn from 0 to 18 degrees, making the branches, attached to it, start to move. If the spectator approaches at a closer distance (50 cm), the servo motor turns from 0 to 40 degrees, making the branches move a little bit more. The Servo Motor received an extra supply of energy from an MB-102 3.3V/5V Power Module plugged into electricity and connected to the 2nd board.
 ===Technology===