GMU:DIY Bio: doing things with biology/Niloofar Ghanavati/Initial Idea/A Simple Method of Growing the Plasmodial Slime Mold Physarum Polycephalum

A Simple Method of Growing the Plasmodial Slime Mold Physarum Polycephalum

Physarum polycephalum can be easily grown in its yellow plasmodial stage and in its flagellated stage. With a little care and attention your plasmodium will flourish and perhaps startle you with amazing growth and an ability to escape from almost any container. Keep in mind that slime molds are sensitive to the following: light (they don't like light but light does help trigger spore formation); an excess of water; and not enough moisture.

Growing Plasmodia

Materials:

Petri dish (glass or plastic, need not be sterile) or other suitable container.
Paper towels (white is best, brown will work).
Old Fashioned Oatmeal Flakes (not the instant).
Tap water.
A plasmodium or sclerotium-available from biological supply houses.

Methods:

Cover container bottom with piece of paper towel.
Place piece of living plasmodium or sclerotium on paper towel.
Moisten paper towel with tap water and drain off excess water.
Add one oat flake near slime mold.
Place lid over dish and place in a dark place at room temperature (e.g. place in a drawer or closet).
Next day examine culture and sprinkle with water to give Physarum a gentle rinse and pour off excess water (rinsing improves growth). 
Add 1-3 additional oat flakes near advancing front of plasmodium.
Continue to examine, rinse, and feed daily or every few days.

Additional cultures are easily made by transferring a plasmodial covered oat flake to another container. Producing several cultures is desirable to ensure that you don't loose an only culture due to a unforeseen failure of a plasmodium. Also, having more than one culture allows you to test the effects of different treatments on the slime mold (e.g. exposure to light, cold, different food sources, etc.).

Alternative Materials and Method for Growing Plasmodia

Larger and more vigorous plasmodia have been produced with this method. Use a large container such as a plastic food container or an ice chest. Into this large container place a small bowl. Drape paper towels over bowl so that edges of paper towel contact bottom of large container. Poor enough tap water into the large container to cover the bottom and to wet the edges of the paper towels. Also sprinkle water on dry paper towel that is over the top of the bowl. The water in the bottom of the large container should continue to wick up the paper towel keeping it moist but not soaking wet. Onto the top of the paper towel that is spread across the bowl, place the living plasmodium or sclerotium and place an oat flake nearby. Cover the large container (loosely if possible) and keep in the dark. At least once every two days or so (more frequently if growth is rapid) open container and lightly sprinkle plasmodium with water and add a few additional oat flakes near the advancing front of the plasmodium. To initiate sclerotium formation, allow to slowly dry over several days. To initiate sporangia formation, transfer section of paper towel with plasmodia to clean, moist paper towel (discarding older, oat containing paper towel). Keep moist and periodically briefly expose to light. DO NOT FEED. This is an attempt to starve the plasmodium and induce spore formation.