GMU:Tutorials/Performance Platform/Videowall Calibration: Difference between revisions

From Medien Wiki
No edit summary
Line 54: Line 54:


1. NPort Windows Driver Manager
1. NPort Windows Driver Manager
EYEVIS-Color-Calibration\Moxa\Downloaded\drvmgr_setup_Ver1.18_Build_15022515_whql.exe
<br style="clear:both">
<br style="clear:both">


2. eye Device Setup
2. eye Device Setup
EYEVIS-Color-Calibration\eyeDeviceSetup\Software\eyeDeviceSetup.exe
<br style="clear:both">
<br style="clear:both">


3. EYE-LCD-CAS
3. EYE-LCD-CAS
EYEVIS-Color-Calibration\EYE-LCD-CAS\Software\eyeLCD-CAS.exe
<br style="clear:both">
<br style="clear:both">


Line 67: Line 70:
They are shared on the Google Drive:
They are shared on the Google Drive:
[https://drive.google.com/folderview?id=0BwFYVbmk3aHYUkUzS2cyWndQSlk&usp=sharing]
[https://drive.google.com/folderview?id=0BwFYVbmk3aHYUkUzS2cyWndQSlk&usp=sharing]
EYEVIS-Color-Calibration\Moxa\Downloaded\drvmgr_setup_Ver1.18_Build_15022515_whql.exe


[[File:1-user.png|thumb|User|left|300px]]
[[File:1-user.png|thumb|User|left|300px]]

Revision as of 12:29, 28 July 2016

Introduction

The video wall consists of 4*4 screens, which are connected with each other with serial ports. And all the signal will processed by the signal box which will provide a HDMI port to connect to the computer. The signal from the computer can be then distributed through the box to each screen. And the screens are actually connected in the order that the picture shows below.

Behind Video Wall
Signal Box
Numbers Of All Screens


Useful links:

More info about the Screens: [1] Manual: [2]



Part 1 With Remote Control

The infrared receiver is attached to the right side frame of the video wall. So the screen will react only when you target your remote control towards the infrared receiver.

Remote Control
Infrared Receiver




When you press the "menu" button on the remote control, you can activate the adjustment menu on the screen which is located on the lower right corner. That is actually no.1 screen. You can use the arrow buttons in the menu to do specific adjustments which will have an effect on all the screens. Detailed instructions can be found in the Manual PDF from page 41 to 51.

Picture
Display
Setup
Input


In order to change some settings for individual screens, you need to press "select" button, so that you can see each screen will display some informations containing the number of its own. Then you can choose the screen you want to adjust by pressing the corresponding number on the remote control. In this way, you can make some changes individually.

Select




Part 2 With Software

Softwares will be used:

1. NPort Windows Driver Manager EYEVIS-Color-Calibration\Moxa\Downloaded\drvmgr_setup_Ver1.18_Build_15022515_whql.exe

2. eye Device Setup EYEVIS-Color-Calibration\eyeDeviceSetup\Software\eyeDeviceSetup.exe

3. EYE-LCD-CAS EYEVIS-Color-Calibration\EYE-LCD-CAS\Software\eyeLCD-CAS.exe


They only work on Windows.

They are shared on the Google Drive: [3]

EYEVIS-Color-Calibration\Moxa\Downloaded\drvmgr_setup_Ver1.18_Build_15022515_whql.exe


User
Setup
Service
Status
Gamma
Preference
Reports