GMU:Tutorials/Performance Platform/Videowall Calibration: Difference between revisions

From Medien Wiki
Line 50: Line 50:




[[File:1-user.png|thumb|User|300px]]
[[File:1-user.png|thumb|User|left|300px]]
[[File:2-setup.png|thumb|Setup|300px]]
[[File:2-setup.png|thumb|Setup|left|300px]]
[[File:3-service.png|thumb|Service|300px]]
[[File:3-service.png|thumb|Service|left|300px]]
[[File:4-status.png|thumb|Status|300px]]
[[File:4-status.png|thumb|Status|left|300px]]
[[File:5-gamma.png|thumb|Gamma|300px]]
[[File:5-gamma.png|thumb|Gamma|left|300px]]
[[File:6-preference.png|thumb|Preference|300px]]
[[File:6-preference.png|thumb|Preference|left|300px]]
[[File:7-reports.png|thumb|Reports|300px]]
[[File:7-reports.png|thumb|Reports|left|300px]]

Revision as of 10:12, 28 July 2016

Introduction

The video wall consists of 4*4 screens, which are connected with each other with serial ports. And all the signal will processed by the signal box which will provide a HDMI port to connect to the computer. The signal from the computer can be then distributed through the box to each screen.


Useful links: More info about the Screens: [1] Manual: [2]


Behind Video Wall
Signal Box



Part 1 With Remote Control

The infrared receiver is attached to the right side frame of the video wall. So the screen will react only when you target your remote control towards the infrared receiver.


Remote Control
Infrared Receiver
Numbers Of All Screens


When you press the menu button

Picture
Display
Setup
Input


Select




Part 2 With Software

Softwares will be used:


User
Setup
Service
Status
Gamma
Preference
Reports