GMU:Tutorials/Performance Platform/Videowall Calibration: Difference between revisions

From Medien Wiki
Line 1: Line 1:
== Introduction ==
== Introduction ==
The video wall consists of 4*4 screens, which are connected with each other with serial ports.
The video wall consists of 4*4 screens, which are connected with each other with serial ports. And all the signal will processed by the signal box which will provide a HDMI port to connect to the computer. The signal from the computer can be then distributed through the box to each screen.





Revision as of 12:35, 9 July 2016

Introduction

The video wall consists of 4*4 screens, which are connected with each other with serial ports. And all the signal will processed by the signal box which will provide a HDMI port to connect to the computer. The signal from the computer can be then distributed through the box to each screen.


Behind Video Wall
Signal Box


Part 1 With Remote Control

Remote Control
Infrared Receiver
Numbers Of All Screens

The infrared receiver is attached to the right side frame of the video wall. So the screen will react only when you target your remote control towards the infrared receiver.

The remote control is


Part 2 With Software