GMU:Tutorials/Performance Platform/Controlling an Arduino with The Captury: Difference between revisions

From Medien Wiki

@@ Line 73: / Line 73: @@
 <br style="clear:both">
+'''The Code Using Photocell:'''
+<source lang="Java" line start= "1">
+int photocellPin = 0;     // the cell and 10K pulldown are connected to A0
+int photocellPin1 = 1;     // the cell and 10K pulldown are connected to A1
+int photocellReading, photocellReading1;     // the analog reading from the sensor divider
+void setup() {     // We'll send debugging information via the Serial monitor
+  Serial.begin(9600);
+  pinMode(3, OUTPUT);
+  pinMode(5, OUTPUT);
+}
+void loop(void) {
+  photocellReading = analogRead(photocellPin);
+  photocellReading1 = analogRead(photocellPin1);
+  if(photocellReading < 400 && photocellReading1 < 400 ){
+    digitalWrite(3, HIGH);
+    digitalWrite(5, HIGH);
+    delay(100);
+  }
+  else {
+    digitalWrite(3, LOW);
+    digitalWrite(5, LOW);
+    delay(100);
+  }
+  Serial.print("Analog reading1 = ");
+  Serial.println(photocellReading);     // the raw analog reading1
+  Serial.print("Analog reading2 = ");
+  Serial.println(photocellReading1);     // the raw analog reading2
+  Serial.println(" ");
+  delay(10);
+}
+</source>
 == Second Part ==