(THREADS OF LIGHT (¿?))
(PROCESS)
Line 38: Line 38:
  
 
'''MOTOR'''
 
'''MOTOR'''
 +
 +
For the yarn to be going down a motor was the best option. A slower DC motor with a switch was developed to get to know how it works.

Revision as of 16:46, 4 June 2016

THREADS OF LIGHT (¿?)

MATERIALS

  • Fire (candle)
  • Motors
  • Speaker
  • Resistors
  • Light Bulb with no glass

SCHEMA

Six motors with yarn in the shaft will be on top of the installation hidden behind speakers that will be making sound according to the temperature sensors or bulb base with tungsten cables. On the lower part of the installation burning candles will lay on the floor. The thread will be hanging and when it reaches the candle it will start burning. The fire will then go all the way up until it reaches the light base sensor. When its temperature changes, the sound will also change and the motor will release more yarn so the process be repeated again.

Schema2.png

PROCESS

BULB SENSOR

Finding the right bulb sensor.

The tungsten cables that are used to light up a bulb are good sensors for temperature. With the right debugged arduino code they can become in very sensitive heat sensors, they work amazing with fire.

Bulb break.png First bulb test.png


A research was made to find out how the light bulbs work and how to break glass.

Light bulbs are very aesthetic materials to work on. They do not need to be all the time giving light but many of their parts can be used. Most light bulbs nowadays are made with LEDLight-emitting diode lights or halogen gases, to make them last longer.

3 base con.png

Three bulbs base were connected to arduino to test different temperatures given by different types of tungsten assembled cables, some were giving numbers from 200 to 400 and others from 500 to 800. This was displayed in the code as the frequency of sound within the speakers.

The code was giving some troubles because each one of the speakers connected to the sensor had to have a "tone();" and "noTone();" so each sound would respect the other. Multiple speakers were then connected and working, each one of them reacting to their own sensor.

MOTOR

For the yarn to be going down a motor was the best option. A slower DC motor with a switch was developed to get to know how it works.