Revision as of 16:21, 2 June 2019

First Assignment

Main Project

Project Idea

For my project I would like to create a drum set. The drum setup would be to have a kick drum, a snare, a tom and two hi-hats; one hi-hat that is open and one hi-hat that is closed. The idea would be to install piezo sensors into different cylinders. When each cylinder is struck it would produce the sound from a different piece of the drum kit.

Preliminary Tests

Arduino Knock Test

For the beginning test of my project I followed the knock tutorial found on Arduino [1]. The hardware setup for the example was simple enough. Unlike the example, I used a breadboard and taped my Piezo sensor to the bottom of a lid from a mixed nuts container. With this test, when I tap on the lid of the container, Arduino should output knock! and the LED light should toggle on/off.

Creating First Drum Piece

Setting Up Arduino to Output Sensor Data

Although the knock test worked, I realized that I need to output the numerical data that the piezo sensor detects. Here is the coding and output:

@@ Line 18: / Line 18: @@
 [[File:knock_output.png|400px]]
 [[File:knock_light.jpg|400px]]
+= Creating First Drum Piece  =
+== Setting Up Arduino to Output Sensor Data ==
+Although the knock test worked, I realized that I need to output the numerical data that the piezo sensor detects. Here is the coding   and output:
+[[File:kael_arduino_piezo.jpg|400px]]
+[[File: kael_arduino_piezo.jpg|400px]]