GMU:Habitats SS18/Zhenhuan Weng: Difference between revisions

From Medien Wiki
No edit summary
No edit summary
Line 37: Line 37:


'''06.06.2018'''
'''06.06.2018'''
This is my first time to build the Kelvin generator, so I wanted to use these materials to test the system and produced electricity for further study. I prepared all these materials to build the first Kelvin generator, unfortunately it was not simply as it looks like.


Kelvin generator 1
<gallery>
<gallery>
File:WechatIMG257.jpeg
File:WechatIMG257.jpeg
</gallery>
</gallery>
'''Introduction'''
This is my first plan of Kelvin generator. I used two isolated paper boxes to contain water separately, then water could flow out from the tiny hole in the bottom of each paper box and passed through the metal ring. Then the foil paper bowls could contain the vertically falling water separately. Then the last thing was to connected all these wires and waited for current generation.
This is my first plan of Kelvin generator. I used two isolated paper boxes to contain water separately, then water could flow out from the tiny hole in the bottom of each paper box and passed through the metal ring. Then the foil paper bowls could contain the vertically falling water separately. Then the last thing was to connected all these wires and waited for current generation.
<gallery>
<gallery>
File:WechatIMG539.jpeg
File:WechatIMG539.jpeg
Line 61: Line 65:
</gallery>
</gallery>


Analysis
'''Analysis'''
This is my first time to build the Kelvin generator, so I wanted to use these materials to test the system and produced electricity for further study. I prepared all these materials to build the first Kelvin generator, unfortunately it was not simply as it looks like.
 
'''Reason 1'''
<gallery>
<gallery>
File:WechatIMG258.jpeg
File:WechatIMG258.jpeg
</gallery>
</gallery>


'''Reason 2'''
<gallery>
<gallery>
File:WechatIMG259.jpeg
File:WechatIMG259.jpeg

Revision as of 13:58, 4 July 2018

Kelvin generator - Euglena


Abstract

I would like to explore how Euglenas would behave in the electrostatic water. The electricity would be created by Kelvin generator which converts falling water to electrostatic charge and using the electric wires to conduct electricity. Then we could test its functionality and how much current electricity would be created. Then we could try to redirect the electrostatic field into a DC current and then let it flow in the water and see how Euglenas behave. Based on the experiments we could explore how Euglenas would behave in different intensity of electricity and Euglenas could stand how much electricity in water.

The principle of Kelvin generator

05.06.2018 Preparing materials

Materials List: Two Coca-Cola drink bottles;Two Paper Milk Boxes;Two foil paper Bowls ; One big Plastic Plates; Wires

Functions of each parts:

Two Coca-Cola drink bottles:I chose two Coca-Cola drink bottles as the materials of metal rings that is the most important part in the system of Kelvin Generator. In order to improve efficiency and save more time to test the system of Kelvin generator, I chose Coca-Cola drink bottles as the materials to make metal rings,because I thought they were made by metal and they were more easily carved up by cutter comparing with other metal cans.

Two Paper Milk Boxes: Considering the volume of insulated containers, I chose two paper milk boxes as the water tank, because the surface material of them inside were plastic film which were insulator and solider than paper, if we wanted to contain more water and easy to carry, that is a good choose I though at that time.

Two foil paper Bowls: I chose the foil paper Bowls as the container of water flow in this system, because they could conduct electricity and light quality, the most important things is that they were just in my kitchen. So I could use them as soon as possible to test the system.


06.06.2018

Kelvin generator 1

Introduction This is my first plan of Kelvin generator. I used two isolated paper boxes to contain water separately, then water could flow out from the tiny hole in the bottom of each paper box and passed through the metal ring. Then the foil paper bowls could contain the vertically falling water separately. Then the last thing was to connected all these wires and waited for current generation.


Analysis This is my first time to build the Kelvin generator, so I wanted to use these materials to test the system and produced electricity for further study. I prepared all these materials to build the first Kelvin generator, unfortunately it was not simply as it looks like.

Reason 1

Reason 2

13.06.2018 Plan B

Analysis

20.06.2018 Plan C

Analysis

27.06.2018 The Final Kelvin Generator