How to Captury
- Start computer on the right
- Login “Captury live” password “weimar”
- Start console
- Enter command -> captury
- If the cameras are not shown, take a look at the router on the right in the back space, maybe it is unplugged; it will take a couple of minutes to start the webcams
- After captury starts, take a look at the top right corner — if background is set to bad,- calibrate by clicking the button. If all is good, let someone go into the playground, drag and drop “<new>” above the figure on the webcams. If after draging and dropping no avatar appears, captury doesn’t detect figure. Maybe you are dressed black?
- Open Sound Control tab/panel (top left)
- From another computer open pd patch, connect to the captury station IP and send a “subscribe” message to the station. Path within the send message should look like:
[send /subscribe/yourname/blender/Root/vector( where “yourname” is your tracked avatar or * everything
- As soon as the connection is established, by default it runs 30s. The time could be changed in the settings
- Routed is the vector data XYZ