GMU:Tutorials/Performance Platform/Videowall Calibration

From Medien Wiki

Introduction

The video wall consists of 4*4 screens, which are connected with each other with serial ports. And all the signal will processed by the signal box which will provide a HDMI port to connect to the computer. The signal from the computer can be then distributed through the box to each screen.


 
Behind Video Wall
 
Signal Box



Useful links:

More info about the Screens: [1] Manual: [2]

Part 1 With Remote Control

 
Remote Control
 
Infrared Receiver
 
Numbers Of All Screens

The infrared receiver is attached to the right side frame of the video wall. So the screen will react only when you target your remote control towards the infrared receiver.

When you press the menu button

 
Picture
 
Display
 
Setup
 
Input


 
Select




Part 2 With Software

Softwares will be used: