GMU:Dataflow I WS12/Brian Bixby: Difference between revisions

From Medien Wiki
Line 1: Line 1:
== Dataflow I & DIY-Microscopy / Project Overview ==
== Project Overview ==


I am building an installation environment using sound and video. The project is composed with Pure Data and a live feed from a microscope. I create a sound in PD that vibrates my petri dish/microscope and this moving image creates additional sound. This becomes a circular loops of sound generation which cuts off at a certain decibel level.
I am building an installation environment using sound and video. The project is composed with Pure Data and a live feed from a microscope. I create a sound in PD that vibrates my petri dish/microscope and this moving image creates additional sound. This becomes a circular loops of sound generation which cuts off at a certain decibel level.

Revision as of 09:19, 23 January 2013

Project Overview

I am building an installation environment using sound and video. The project is composed with Pure Data and a live feed from a microscope. I create a sound in PD that vibrates my petri dish/microscope and this moving image creates additional sound. This becomes a circular loops of sound generation which cuts off at a certain decibel level.

Here is an example of what the microscopic video of sawdust and pondwater looks like; <videoflash type=vimeo>55232052|420|280</videoflash>

Dataflow I & DIY-Microscopy / Installation Sketches

During some experimentation in the studio I observed that the microscope is very sensitive to movement. I would like to install my microscope onto a sub-woofer with a petri dish on it. The petri dish will have a mixture of pond water and sawdust. The vibrations in the petri dish will create an analog reactive visual feedback to a sound source that is played. This will be presented as a stand-alone video and sound installation.

Subwoofer microscopy.jpg