GMU:Tutorials/Performance Platform/Sound System Stereo: Difference between revisions
From Medien Wiki
Keepstring (talk | contribs) |
Keepstring (talk | contribs) |
||
| Line 67: | Line 67: | ||
== Trouble shooting == | == Trouble shooting == | ||
Situation 1: You already plug in sound cable but not sound? | Situation 1: You've already plug in sound cable but not sound? | ||
Answer: | Answer: | ||
* Check if you | * Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on. | ||
* Check if you already | * Check if you have already turned on the Fireface UFX and Fireface 800.<br> | ||
Situation 2: All are truned on but still no sound? | Situation 2: All are truned on but still no sound? | ||
* Check the Mac Pro and go to RME setting application(within the deck)to see if the sound card is selected to "Fireface 800" correctly. | * Check the Mac Pro and go to RME setting application(within the deck)to see if the sound card is selected to "Fireface 800" correctly. | ||
* Open up the totalmix control panel, sending sound signal from your playback device, then check it | * Open up the totalmix control panel, sending sound signal from your playback device, then check it there has signal in the stereo channal(Default is 1/2). | ||
* Check if you already | * Check if you have already chose the "Master out" as output mode correctly, and of course, volume up until you could listen somthing. | ||