GMU:Printed Circuit Board Art/mxkllmnn: Difference between revisions

Line 62:

[[File:SmartTestsResults.png|800px]]

Finally, I received the order.

Finally, I received the order. I made a plan in which order the components should be mounted and grabbed my soldering iron to finish the PCBs.

~~[receiving order]~~

[[File:solderOrder.png|800px]]

The prototypes shown in the picture below are only some of those I did. To be honest, I ordered another six PCBs right after receiving the first batch because in the meantime I already improved my design slightly. Also, I actually wanted to have a black solder mask, which is not available at aisler and that is why I ordered a third batch (again with some minor improvements) at [https://jlcpcb.com J@LC]. There was a special offer of aluminum PCBs. Luckily I realised the design as one layer only, which is a requirement for this variant.

[[File:prototypes_ABC.jpg|800px]]

So here is the final product:

[video or picture to be included]

'''Conclusion:'''

@@ Line 62: / Line 62: @@
 [[File:SmartTestsResults.png|800px]]
-Finally, I received the order.
+Finally, I received the order. I made a plan in which order the components should be mounted and grabbed my soldering iron to finish the PCBs.
-[receiving order]
 [[File:solderOrder.png|800px]]
+The prototypes shown in the picture below are only some of those I did. To be honest, I ordered another six PCBs right after receiving the first batch because in the meantime I already improved my design slightly. Also, I actually wanted to have a black solder mask, which is not available at aisler and that is why I ordered a third batch (again with some minor improvements) at [https://jlcpcb.com J@LC]. There was a special offer of aluminum PCBs. Luckily I realised the design as one layer only, which is a requirement for this variant.
 [[File:prototypes_ABC.jpg|800px]]
+So here is the final product:
+[video or picture to be included]
 '''Conclusion:'''