GMU:My Computer, Max, and I/Pedro Ramos: Difference between revisions

Line 34:

Considering the short incursion on generals on Machine Learning, and the decision on working with Wekinator considering the opportunities it offers, and its limitations, a short description on the connection between Max/MSP and Wekinator might be made necessary. Considering the last developed patch for the system, follows a brief step-by-step on the Inputs, Model Processing and training, and Output back to Max/MSP.

[[File:osc_send.png|200px]]

[[File:osc_send.png|200px]] [[File:osc_receive.png|400px]]

OSC Connection: Max/MSP - Wekinator - Max/MSP

For such, with the installation of Wekinator, an extra software called WekiInputHelper is also installed. WekiInputHelper helps making sure that the inputs are successfully connected, and also helps monitoring the input and output signal and data. For working with WekiInputHelper, which is not compulsory, an extra OSC Control Port is supposed to be specified. The control port on WekiInputHelper will the listen the data sent through Max/MSP, and will be outputted to Wekinator through another Port (for an example, 6448 and 6449). On Wekinator, an output Port will also be determined (for an example, 12001), which is how the outputted data can be sent back to Max/MSP or another intended software.

@@ Line 34: / Line 34: @@
 Considering the short incursion on generals on Machine Learning, and the decision on working with Wekinator considering the opportunities it offers, and its limitations, a short description on the connection between Max/MSP and Wekinator might be made necessary. Considering the last developed patch for the system, follows a brief step-by-step on the Inputs, Model Processing and training, and Output back to Max/MSP.
-[[File:osc_send.png|200px]]
+[[File:osc_send.png|200px]] [[File:osc_receive.png|400px]]
+OSC Connection: Max/MSP - Wekinator - Max/MSP
 For such, with the installation of Wekinator, an extra software called WekiInputHelper is also installed. WekiInputHelper helps making sure that the inputs are successfully connected, and also helps monitoring the input and output signal and data. For working with WekiInputHelper, which is not compulsory, an extra OSC Control Port is supposed to be specified. The control port on WekiInputHelper will the listen the data sent through Max/MSP, and will be outputted to Wekinator through another Port (for an example, 6448 and 6449). On Wekinator, an output Port will also be determined (for an example, 12001), which is how the outputted data can be sent back to Max/MSP or another intended software.