GMU:DIY Biolab “Driver’s License”/Marie Laure Ebel: Difference between revisions

From Medien Wiki

@@ Line 67: / Line 67: @@
 ====#First attempt====
-[[File:STEP 3.1.JPG|400px]]
+<gallery>
-[[File:STEP 3.2.JPG|400px]]
+File:STEP 3.1.JPG|STEP 3.1
-[[File:STEP 3.3.JPG|400px]]
+File:STEP 3.2.JPG|STEP 3.2
-[[File:STEP 3.4.jpg|400px]]
+File:STEP 3.3.JPG|STEP 3.3
-[[File:STEP 3.5.jpg|400px]]
+File:STEP 3.4.jpg|STEP 3.4
-[[File:STEP 3.6.jpg|400px]]
+File:STEP 3.5.jpg|STEP 3.5
-[[File:STEP 3.7.JPG|400px]]
+File:STEP 3.6.jpg|STEP 3.6
-[[File:STEP 3.8.JPG|400px]]
+File:STEP 3.7.JPG|STEP 3.7
-[[File:STEP 3.9.JPG|400px]]
+File:STEP 3.8.JPG|STEP 3.8
-[[File:STEP 3.10.JPG|400px]]
+File:STEP 3.9.JPG|STEP 3.9
+File:STEP 3.10.JPG|STEP 3.10
+</gallery>
 => I got no results: either the ladder nor the DNA samples were "growing" as they should (multiple lines).
@@ Line 84: / Line 86: @@
 ====#Second attempt====
-[[File:STEP 3.2.1.jpg|400px]]
+<gallery>
-[[File:STEP 3.2.2.jpg|400px]]
+File:STEP 3.2.1.jpg|STEP 3.2.1
-[[File:STEP 3.2.3.jpg|400px]]
+File:STEP 3.2.2.jpg|STEP 3.2.2
-[[File:STEP 3.2.4.jpg|400px]]
+File:STEP 3.2.3.jpg|STEP 3.2.3
+File:STEP 3.2.4.jpg|STEP 3.2.5
+</gallery>
 => Same problem: the ladder was growing as one bloc only (see the little drawing). Even during a 2.2 attempt with new SERVA Stain G (which I thought it could be the problem since the previous tube was quite old). Then, I noticed that the positive side was turning in blue color and some part of the agarose gel was melting down.