IFD:Eclectic Electric!/DocumentationWS2013: Difference between revisions

← Older edit

IFD:Eclectic Electric!/DocumentationWS2013 (view source)

Revision as of 21:27, 28 June 2014

871 bytes added , 28 June 2014

→‎Lydia

Lydiakluge

156

edits

@@ Line 8: / Line 8: @@
 [[John_Doe/Week1]]
 == Lydia ==
-== Martin==
-== Aidas==
-== Jonas L.==
-== Thomas==
-== Julia==
-== Adrian ==
-'''Exercise 1:'''
-Today Jonas L., Aidas and I soldered our little LED-Exercise together.
+'''First Weeks Assigment.'''
+:[[/Lydia_Kluge/Exercise1|1. Get That Soldering Done]]
-At first we wanted to build a 2D Matrix out of the LEDs with separate buttons for every Light, but we decided to just handle every line of five LEDs separately in order to save some resistors and buttons.
+'''Second Exercise.'''
+:[[/Lydia_Kluge/Exercise2|2. Simply Sound]]
-----
-We took 25 bright white LEDs and put them soldered them to our wires in parallel together with a 330 Ohm Resistor and a Push-Button for each set of five LEDs.
+'''Main Project.'''
+:[[/Lydia_Kluge/MainProject|3. Playing Pong]]
-<gallery caption="Our 5x5 Matrix Circuit" widths="500px" heights="500px" perrow="1">
+== Jonas Köhler / Martin Melcher / Benjamin Voßler ==
-File:LED_Matrix_Buttons.png
+[[File:Jkmmbv_astabile_kippstufe_06.jpg|80px]]
-</gallery>
-We used a piece of cardboard and pushed some holes with a needle in it to stabilize the LEDs before trying to solder everything together.
-<gallery caption="The soldered circuit" widths="250px" heights="250px" perrow="1">
+[[JonasKoehlerMartinMelcherBenjaminVoßler/Week1|The Astable Multivibrator In A Honey Jar]]
-File:LED_Matrix_back_cut_small.jpg‎
-File:LED_Matrix_front_cut_small.jpg‎
-</gallery>
+== Aidas==
+== Jonas L.==
+== Thomas==
+== Julia==
+== Adrian ==
-The estimated build time for this circuit was three to four hours.
+[[Jonas_L_Aidas_Adrian/Week1]]
-----
 == Stefanie==
@@ Line 53: / Line 46: @@
 While we were soldering we discovered that it is quite difficult to solder three cables at one connection.
 The picture below shows the result.
+[[File:LightdendandentLeds.JPG|600px]]
+[[File:curcuitdiagram.JPG|300px]]
+Homework = we were asked to hack or modify a simple sound recorder, by changing the resistor.
+I melted off the resistor on the board. I then added a Light Depending Resistor. I also added connector ports to the other cables so that it can be changed more often with more ease. Images of the modification below.
+[[File:sound mod 1.jpg]]
+[[File:sound mod 2.jpg]]
+[[File:sound mod 3.jpg]]
+So now, depending on how much light the LDR receives, the sound that you record with the device will be processed slower (Less light) or faster (more light) resulting in a slow and fast playback which includes pitch change.
+My main Project for tho class, is to re-program a pair of VR glasses (shutter glasses) so that they can be used to change the frequency (flashing) of natural light sources, e.g the Sun, instead of the more widely used artificial light.
+Inspired by LUCIA Nº03: http://www.gesund-im-licht.at
+[[File:BDig_wiki.jpg]]
+[[File:shutglas2.jpg]]
+[[File:wearglas_wiki1.jpg]]
+[[File:wearglass2_wiki.jpg]]
+[[File:geometpatt_wiki.jpg]]
+[[File:rod4_wiki.jpg]]
+[[File:wearonface_wiki.jpg]]
+DOCUMENTATION PDF:  [[Media:Eclectic_Electric_WS14.pdf]]
+VIDEO: https://www.youtube.com/watch?v=bmfWK6aJ0ro
 == Rodrigo==
 == Tobias==
 == Somayeh==
 == Clotilde==
-== Benjamin==
-== Jonas K.==
 == Heinrich ==
 Light dependant LED
@@ Line 68: / Line 97: @@
 While we were soldering we discovered that it is quite difficult to solder three cables at one connection.
 The picture below shows the result.
+[[File:LightdendandentLeds.JPG|600px]]
+[[File:curcuitdiagram.JPG|300px]]
 == Asu Ceren ==
@@ Line 83: / Line 115: @@
 While we were soldering we discovered that it is quite difficult to solder three cables at one connection.
 The picture below shows the result.
+[[File:LightdendandentLeds.JPG|600px]]
+[[File:curcuitdiagram.JPG|300px]]
 == Elahe ==