File:Claystruder-overview.jpg: Difference between revisions

Latest revision as of 10:09, 11 March 2011

Claystruder mounted on the RapMan 3D printer

This picture has been taken by the uploader/user in this wiki.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	10:09, 11 March 2011		1,640 × 2,768 (598 KB)	Matthias.breuer (talk \| contribs)	Claystruder mounted on the RapMan 3D printer

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D40
Exposure time	1/50 sec (0.02)
F Number	f/4.5
ISO speed rating	800
Date and time of data generation	10:43, 11 March 2011
Lens focal length	31 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	GIMP 2.6.11
File change date and time	11:03, 11 March 2011
Exposure Program	Normal program
Exif version	2.1
Date and time of digitizing	10:43, 11 March 2011
APEX exposure bias	0
Maximum land aperture	4.2 APEX (f/4.29)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire
DateTime subseconds	00
DateTimeOriginal subseconds	00
DateTimeDigitized subseconds	00
Color space	sRGB
Sensing method	One-chip color area sensor
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	46 mm
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown