GMU:Speculative Atmospheres II/Sophia Amelia Eickhoff: Difference between revisions

From Medien Wiki
mNo edit summary
mNo edit summary
Line 5: Line 5:
For my project I want to collect the invisible elements (data) that shape the natural atmosphere on my walks and visualize them artistically.  
For my project I want to collect the invisible elements (data) that shape the natural atmosphere on my walks and visualize them artistically.  


On the route, light, air quality, temperature, pulse and humidity are measured every minute using an Arduino and sensors. These are stored via an SD card and read out with a code.  
On the route, light, air quality, temperature and pulse are measured every minute using an Arduino and sensors. These are stored via an SD card and read out with a code.  
<html>
The time and route are stored using a tracking app.The data determines the parameters of the subsequent image design.
#include <SPI.h> //including SDcard
For transport, a "rack" is built that attaches the breadboard to the body.
 
#include <SPI.h> //including SDcard
   #include <SD.h>
   #include <SD.h>
   #include <math.h> //including for temperature calculation
   #include <math.h> //including for temperature calculation
 
File myFile; //directing data to file
  File myFile; //directing data to file
 
void setup() {
void setup() {
 
Serial.begin(9600); //starting comunication with arduino
  Serial.begin(9600); //starting comunication with arduino
while (!Serial) {
while (!Serial) {
;  
;  
}
}
  Serial.print("Initializing SD card..."); //initializing the SD card
Serial.print("Initializing SD card..."); //initializing the SD card
   if (!SD.begin(10)) {
   if (!SD.begin(10)) {
   Serial.println("initialization failed!"); // signal if connection failed
   Serial.println("initialization failed!"); // signal if connection failed
while (1);
while (1);
}
}
   Serial.println("initialization done."); // signal if connection succeded
   Serial.println("initialization done."); // signal if connection succeded
   myFile = SD.open("test.txt", FILE_WRITE); //naming file
   myFile = SD.open("test.txt", FILE_WRITE); //naming file
    
   if (myFile) {
if (myFile) {
   Serial.print("Writing to test.txt...");
   Serial.print("Writing to test.txt...");
   myFile.println ("Spaziergang"); //naming the section of the file, date, place, number of walk
   myFile.println ("Spaziergang"); //naming the section of the file, date, place, number of walk
   myFile.close();
   myFile.close();
   Serial.println("done.");
   Serial.println("done.");
}
}
else {
else {
Line 46: Line 42:
   if (myFile) {
   if (myFile) {
//collect incoming data from sensors
//collect incoming data from sensors
//light
//light
  Serial.print("Writing to test.txt...");
  Serial.print("Writing to test.txt...");
Line 52: Line 47:
   myFile.print( "Licht: ");  
   myFile.print( "Licht: ");  
   myFile.println(light);
   myFile.println(light);
//temperature
//temperature
   myFile.print ("Temperatur: ");
   myFile.print ("Temperatur: ");
Line 59: Line 53:
   double r=(5-fenya)/fenya*4700;
   double r=(5-fenya)/fenya*4700;
   myFile.println( 1/(  log(r/10000) /3950 + 1/(25+273.15))-273.15);
   myFile.println( 1/(  log(r/10000) /3950 + 1/(25+273.15))-273.15);
    
   // airquality
// airquality
   int gas = analogRead(A3);
   int gas = analogRead(A3);
   myFile.print( "Gas: ");
   myFile.print( "Gas: ");
   myFile.println(gas, DEC);
   myFile.println(gas, DEC);
//pulse
//pulse
   int pulse = analogRead(A2);
   int pulse = analogRead(A2);
   myFile.print( "Pulse: ");
   myFile.print( "Pulse: ");
   myFile.println(pulse);
   myFile.println(pulse);
 
delay(60000); //collect data every minute
  delay(60000); //collect data every minute
 
// close the file:
// close the file:
   myFile.close();
   myFile.close();
   Serial.println("Sensor.geschrieben.");
   Serial.println("Sensor.geschrieben.");
}
}
   else {
   else {
Line 82: Line 71:
}
}
}
}
<html>
The time and route are stored using a tracking app.The data determines the parameters of the subsequent image design.
For transport, a "rack" is built that attaches the breadboard to the body.


[[File:Screenshot (48).png|400px]]


[[File:Screenshot (48).png|400px]]




After each walk the collected Data will be read out and oil painted onto a cardboardcanvas.  
After each walk the collected Data will be read out and acryl painted onto a cardboardcanvas.  
*Time/Duration= Size of the canvas
*Time/Duration= Size of the canvas
*Route= Shape of the line
*Route= Shape of the line

Revision as of 12:37, 4 January 2022

Idea

Mapping of the Invisible Enviorment

For my project I want to collect the invisible elements (data) that shape the natural atmosphere on my walks and visualize them artistically.

On the route, light, air quality, temperature and pulse are measured every minute using an Arduino and sensors. These are stored via an SD card and read out with a code. The time and route are stored using a tracking app.The data determines the parameters of the subsequent image design. For transport, a "rack" is built that attaches the breadboard to the body.

  1. include <SPI.h> //including SDcard
 #include <SD.h>
 #include <math.h> //including for temperature calculation
File myFile; //directing data to file

void setup() { Serial.begin(9600); //starting comunication with arduino while (!Serial) {

}

Serial.print("Initializing SD card..."); //initializing the SD card
 if (!SD.begin(10)) {
 Serial.println("initialization failed!"); // signal if connection failed

while (1); }

 Serial.println("initialization done."); // signal if connection succeded
 myFile = SD.open("test.txt", FILE_WRITE); //naming file
 if (myFile) {
 Serial.print("Writing to test.txt...");
 myFile.println ("Spaziergang"); //naming the section of the file, date, place, number of walk
 myFile.close();
 Serial.println("done.");

} else { // if the file didn't open, print an error:

  Serial.println("error opening test.txt"); //signal if opening failed
 }
}

void loop() {

//if the communication started successfully-

 myFile = SD.open("test.txt", FILE_WRITE);
 if (myFile) {

//collect incoming data from sensors //light

Serial.print("Writing to test.txt...");
int light = analogRead(A0);
 myFile.print( "Licht: "); 
 myFile.println(light);

//temperature

 myFile.print ("Temperatur: ");
 double temp=analogRead(A1);
 double fenya=(temp/1023)*5;
 double r=(5-fenya)/fenya*4700;
 myFile.println( 1/(  log(r/10000) /3950 + 1/(25+273.15))-273.15);
 // airquality
 int gas = analogRead(A3);
 myFile.print( "Gas: ");
 myFile.println(gas, DEC);

//pulse

 int pulse = analogRead(A2);
 myFile.print( "Pulse: ");
 myFile.println(pulse);

delay(60000); //collect data every minute // close the file:

 myFile.close();
 Serial.println("Sensor.geschrieben.");

}

  else {

// if the file didn't open, print an error:

 Serial.println("error opening test.txt");

} }

Screenshot (48).png


After each walk the collected Data will be read out and acryl painted onto a cardboardcanvas.

  • Time/Duration= Size of the canvas
  • Route= Shape of the line

Linearroute.png Anhang 1 (2).jpegRazm.jpeg

  • Temperature= Color
  • Light= Saturation of the color
  • Air quality= contour of the line
  • Pulse= Height of the line
  • Humidity= Thickness of the line
  • (distance= space around the line)

Rotgelbrauml.jpeg


  • (Background= Photograph of the Walk)

Hintergrund.png



Additional

The place and the area of the walked route are indicated. Depending on what dominates the walk, a text (internal state) or a photo (external state) is attached. Also, an attempt is made to put this state in context with the collected data.


Keywords

  • Determination-Indetermination
  • History of Mapping
  • Strollology
  • Correlation of Data
  • Context/ Asssociation of Color
  • (Gerhard Richter)