Prof. Dr.-Ing. Timon Rabczuk
Professur Modellierung und Simulation - Mechanik
Marienstraße 15, Raum 104
(Zugang über Sekretariat, Raum 105)
Tel: +49 (0) 3643 / 58 45 11
E-Mail: timon.rabczuk[at]uni-weimar.de
ISI Highly Cited Researchers 2014 in the categories 'Computer Science' and 'Engineering'
Research Interests
The research focus of Prof. Rabczuk is Computational Solid Mechanics with emphasis on method development for problems involving fracture and failure of solids and fluid-structure interaction.
Prof. Rabczuk is particularly interested in developing multiscale methods and their application to computational materials design.
Constitutive Modeling
Material Instabilities, Fracture, Strain Localization
Numerical Methods (Extended Finite Element and Mesfhree Methods)
Isogeometric Analysis
Computational Fluid-Structure Interaction
Biomechanical Engineering
Research Grants: EU - FP7
1.1.2017-31.12.2020 H2020-MSCA-RISE-2016: Environmentally best practices and optmisation in hydraulic fracturing for shale gas/oil development (BESTOFRAC), 4 academic beneficiaries and 2 industrial beneficiaries, start: 1.1.2017
1.6.2014-30.5.2019 ERC-CoG: Computational Modeling and Design of Lithium-ion Batteries (COMBAT), start: 1.6.2014
2013 ERC-CoG (5 years, 2,000,000 Euro): Computational Modeling and Design of Lithium-ion Batteries (COMBAT), start: 1.6.2014
2013 Coordinator and Scientist in Charge of the Marie-Curie International Incoming Fellowship (IIF) of Dr. Xiaoying Zhuang (2 years, 160,000 Euro): Computational Multiscale Modeling of Hydraulic Fracturing for shale gas development (HYDROFRAC), start envisioned: 1.7.2014
1.1.2012-31.12.2015 Coordinator of the FP7-ITN (Initial Training Network): Integrating Numerical Simulation and Geometric Design Technology (INSIST), 12 ESRs and 2 ERs , 3 industrial partners and 3 academic partners, start 1.1.2012
1.7.2011-30.6.2015 Coordinator of the FP7-IRSES grant MultiFrac.
2011 Coordinator of the FP7-ITN (Initial Training Network): Integrating Numerical Simulation and Geometric Design Technology (INSIST), 3,850,000 Euro (4 years), 12 ESRs (3 years each) and 2 ERs (30 months), 3 industrial partners and 3 academic partners, start 1.1.2012
2010 Coordinator of the FP7-IRSES grant MultiFrac (4 years, 250,000 Euro), start 1.7.2011
Research Grants: DFG
2018 DFG grant RA 1946/31-1: Adaptive isogeometrische dreidimensionale Phasenfeldmodellierung zur morphologischen Evolution von Lipid-Doppelschichten in Wechselwirkung mit Stromungsfeldern und elektrischen Feldern,
2017 DFG grant RA 1946/26-1: Isogeometrische Kollokationsverfahren für komplexe Modelle,
2015 DFG grant RA 1946/23-1: International Collaboration: Mehrskalen-Modellierung der Mikrostrukturevolution in polykristallinen dnnen Kupferfilmen,
2015 DFG grant RA 1946/20-1 : Eine dreidimensionale mehrskalige Peridynamicsformulierung für ferroelektrische / multiferroische Tunnelkontakte,
2013 DFG grant RA 1946/17-1 (1 year): International Collaboration (Tongji University, China): Ein dreidimensionales thermo-mechanisches Rissmodell basierend auf PU-Methoden, start: 1.1.2014
2013 DFG grant RA 1946/16-1 (3 years): Eine dreidimensionale Mehrskalenmethode zurModellierung vonMaterialversagen in Nano-Verbundwerkstoffen, start: 2013
2012 DFG grant RA 1946/14-1: International Collaboration (Jordan): Physics based virtual surgery approach using the point collocation method of finite spheres
2011 DFG grant RA 1946/10-1 (3 years): Eine elektro-mechanische XFEMFormulierung für Vorwärtsprobleme und inverse Probleme, start: 22.12.2011
2011 DFG grant RA 1946/8-1 (2 years): Eine MD-XFEM Kopplung zur Simulation von quasi-sprödem Materialversagen, start: 1.2.2012
2011 DFG grant PO 405/13-1: Europäische Nachwuchsakademie (1 year): 'Multiscale methods for fracture in nanocomposites', start 1.12.2011 (Dr. Yancheng Zhang)
2010 DFG grant RA 1946/5-1 (3 years): Eine neue netzfreie Methode zur Modellierung von duktilem Materialversagen, start 1.4.2011
2009 DFG grant RA 1946/4-1:Workshop Technology and Society: Simulationsverfahren-Forschung für die Gesellschaft (6000 Euro)
2009 DFG grant RA 1946/3-1 (3 years): Robuste FSI-Verfahren für versagende dünne Strukturen, start 1.3.2010
2009 DFG grant RA 1946/2-1 (3 years): EinMehrskalenansatz zurModellierungquasi-spröden Materialversagens, start 1.3.2010
2009 Aufnahme als Antragsteller im Graduiertenkolleg 'Bewertung gekoppelter numerischer Partialmodelle im konstruktiven Ingenieurbau'
Research Group and Partners
Current Post-Doctoral Fellows
- Dr. Bohayra Mortazavi (ERC-COMBAT)
- Dr. Khader Hamdia (ERC-COMBAT)
- Dr. Cosmin Anitescu (DFG)
- Dr. Jianguang Fang
- Dr. Shuvajit Mukherjee
- Dr. Juan Lin
- Dr. Simon Hoell (State position)
Ph.D. Students
- M.Sc. Huilong Ren (ERC-COMBAT)
- M.Sc. Ali Hossein Nezhad Shirazi (ERC-COMBAT)
- M.Sc. Rouzbeh Abadi (ERC-COMBAT)
- M.Sc. Navid Valizadeh (DFG)
- M.Sc. Ehsan Rabizadeh (DAAD)
- M.Sc. Chiu Ling Chan (DAAD)
- M.Sc. Chahmi Oucif (DAAD)
- M.Sc. Jorge Lopez (DAAD)
- M.Sc. Somdatta Goswani (DAAD)
- M.Sc. Mohammed Ashour (DAAD)
- John Nabil Mikhail Hanna (KAAD)
- M.Sc. Bokai Liu (CSC)
- Yongzheng Zhang, (CSC)
- M.Sc. Ali Jenabidehkordi (State position)
- Dipl.-Ing. Daniel Haag (State position)
- M.Sc. Arvin Mojahedin,(Bauhaus scholarship)
- M.Sc. Ahmed Mostafa Shaaban Mohammed (Bauhaus scholarship)
- M.Sc. Hamid reza Nouri (Scholarship of company)
- M.Sc. Luthfi Mohammad Mauludin (RISTEK-DIKTI (Ministry of Research, Technology and Higher Education of Indonesia))
- M.Sc. Mohammad Salavati
- M.Sc. Amir Namazian Jam
- M.Sc. Reza Khademi Zahedi
- M.Sc. Mohsen Talebian
- M.Sc. Manouchehr Shokri
- Cong Cao (Scholarship of company)
Guest Researchers
- Pan Sun
- Jingxin Ma
- Bingfeng Zhang
- David Alberto Medina Alvarez
- Thanh Vien Nguyen
- Hongwei Guo
External Ph.D. Students
- Irfan Marlik (Bosch GmbH)
Former Ph.D. Students
- Dr. Hossein Talebi
- Dipl. Ing. Heiko Beinersdorf
- Dr. Nhon Nguyen-Thanh
- Dipl.-Ing. Daniel Karl
- Dr. Mohammad Silani
- Dr. Pattabhi Ramaiah
- M.Sc. Ilyani Baakar (close to submission)
- M.Sc. Michael Sargado
- M.Sc. Zhongle Lu
- M.Sc. Jafar Amani
- Dr. Yue Jia
- Dr. Fatemeh Amiri
- Dr. Shahram Ghorashi
- M.Sc. Mohammad Reza Azadi Kakavand
- Dr. Subbiah Nanthakumar
- M.Sc. Cheng Ma
- M.Sc. Yang Shen
- Dr. Mohammad Msekh Al'tay
- Dr. Cuixia Wang
- Dr. Nazim Nariman
- Dr. Hamid Ghasemi
- M.Sc. Hamid Radmard Rahmani
- M.Sc. Zhang Chao (submitted)
- M.Sc. Mohammad Reza Izadifar
- M.Sc. Do Van Hien
- M.Sc. Atiyeh Alsadat Mousavi
- M.Sc. Vigneswaran Govindarajan
- M.Sc. Hossein Asadi Kalameh
- M.Sc. Anas Abdulhkim
- M.Sc. Le Hien Duyen Nguyen
Former Guest Researchers
- M.Sc. Kaichun Li
Former Post-Doctoral Fellows
- Dr. Amir Mousavi
- Dr. Farzad Mohebbi
- Dr. Obaidur Ramahan
- Dr. Zili Dai
- Dr. Amir Saboor Bagherzadeh
- Dr. Yancheng Zhang
- Dr. Jiang Jin-Wu
- Dr. Mostafa Jamshidian
- Dr. Shih-Wei Yang
- Dr. Ning Wei
- Dr. Junhua Zhao
- Dr. Hassan Yosefi
- Dr. Larissa Roots
- Dr. Behrouz Arash
- Dr. Shuwei Zhou
- Dr. Jahed Naghipoor
- Dr. Bac Nam Vu
- Dr. Hasan Aladad
- Dr. Guocheng Qi
International Collaboration
- Dr. Xiaoying Zhuang (Tongji University)
- Dr. Pedro Areias (Universidade de Evora)
- Prof. Stephane Bordas (Cardiff University)
- Dr. Pierre Kerfriden (Cardiff University)
- Dr. Robert Simpson (Cardiff University)
- Prof. Goangseup Zi (Korea University)
- Prof. Esteban Samaniego (University of Cuenca)
- Prof. Marino Arroyo (UPC)
- Prof. Robert Gracie (Waterloo University)
- Prof. Jacob Muthu (Wits)
- Prof. Roy Mahapatra (IISC)
- Prof. Bert Jüttler (JKU)
- Prof. Yuri Bazilevs (UCSD)
- Prof. Hung Nguyen-Xuan (Vietnam)
- Prof. Trung Nguyen-Thoi (Vietnam)
- Prof. G.R. Liu (Cincinati)
- Prof. Juan Rodenas Garcia (UPV)
- Prof. Sulin Zhang (Pennstate)
- Dr. Marc Duflot (Cenaero)
- Prof. Philippe Young (Simpleware)
- Dr. Frank Vogel (Inutech)
- Dr. Pedro Baiz (Imperial College)
- Dr. Roham Rafiee (University of Tehran)
Publications
Book
[1] Rabczuk T., Song J.H., Zhuang X.:, Anitescu C. Extended Finite Element and Meshfree Methods, Elsevier, Academic Press, 1. Edition, 2019
Book Chapters
[1] Rabczuk T., Zhuang X.: Meshless Discretization Methods, in: Encyclopedia of Continuum Mechanics, Editors: H. Altenbach, A Öchsner, Springer, 2017 (invited)
[2] Rabczuk T., Zhuang X.: Numerical methods and modeling in impulsive dynamics, in: Encyclopedia of Continuum Mechanics, Editors: H. Altenbach, A Öchsner, Springer, 2017 (invited)
[3] Huerta A., Belytschko T., Fernandez-Mendez S., Rabczuk T., Zhuang X., Arroyo M.: Meshfree Methods, in: Encyclopedia of Computational Mechanics, Editors: E. Stein, R. De Borst, T.J.R. Hughes, Wiley & Sons, 2017 (invited)
[4] Silani M., Rabczuk T., Zhuang X.: Computational Multiscale Modeling of Carbon-Nanotube Reinforced Polymers, in: Carbon-Nanotube Reinforced Polymers, Editor: R. Rafiee, Elsevier, 2017 (invited)
[5] Vu-Bac N., Rabczuk T., Zhuang X.: Continuum/Finite Element Modeling of CN-RPs, in: Carbon-Nanotube Reinforced Polymers, Editor: R. Rafiee, Elsevier, 2017 (invited)
[6] Rabczuk T., Bordas S., Askes H.: Meshfree discretization methods for solid mechanics, in: Encyclopedia of Aerospace Engineering, Editors: R. De Borst, Wiley & Sons, 2010 (invited)
[7] Rabczuk T., Bordas S., Askes H.: Meshfree Methods for Dynamic Fracture, Computational Technology Reviews (ISSN 2044-8430), 2010, 1, 157-185
[8] Bordas S.P.A., Rabczuk T., Rodenas J.J., Kerfriden P., Moumnassi M., Belouettar S.: Recent advances towards reducing the meshing and re-meshing burden in computational sciences, Computational Technology Reviews (ISSN 2044-8430), (2010), 2, 51-82
[9] Huerta A., Belytschko T., Fernandez-Mendez S., Rabczuk T.: Meshfree Methods, in: Encyclopedia of Computational Mechanics, Editors: E. Stein, R. De Borst, T.J.R. Hughes, Wiley & Sons, 2004 (invited)
Publications in peer-reviewed International (SCI) Journals
2022
[1] Yousefi, H., Rabczuk, T.: Wave propagation in generalized thermo-poro-elastic media via wavelet-based cell-adaptive central high resolution schemes using UNO limiters, 2022, Applied Numerical Mathematics, 173, pp. 112-143, DOI: 10.1016/j.apnum.2021.11.010 (Scopus)
[2] Jam, A.N., Jam, N.N., Izadifar, M., Rabczuk, T.: Molecular dynamics study on the crack propagation in carbon doped polycrystalline boron-nitride nanosheets, 2022, Computational Materials Science, 203, art. no. 111066, DOI: 10.1016/j.commatsci.2021.111066 (Scopus)
[3] He, L., Guo, H., Jin, Y., Zhuang, X., Rabczuk, T., Li, Y.: Machine-learning-driven on-demand design of phononic beams, 2022, Science China: Physics, Mechanics and Astronomy, 65 (1), art. no. 214612, DOI: 10.1007/s11433-021-1787-x (Scopus)
[4] Bisheh, H., Luo, Y., Rabczuk, T.: Parametric study of hip fracture risk using qct-based finite element analysis, 2022, Computers, Materials and Continua, 71 (1), pp. 1349-1369, DOI: 10.32604/cmc.2022.018262 (Scopus)
[5] Hamdia, K.M., Ghasemi, H., Zhuang, X., Rabczuk, T.: Multilevel Monte Carlo method for topology optimization of flexoelectric composites with uncertain material properties, 2022, Engineering Analysis with Boundary Elements, 134, pp. 412-418, DOI: 10.1016/j.enganabound.2021.10.008 (Scopus)
[6] Mortazavi, B., Rajabpour, A., Zhuang, X., Rabczuk, T., Shapeev, A.V.: Exploring thermal expansion of carbon-based nanosheets by machine-learning interatomic potentials, 2022, Carbon, 186, pp. 501-508, DOI: 10.1016/j.carbon.2021.10.059 (Scopus)
[7] Zahedi, R.K., Alajlan, N., Zahedi, H.K., Rabczuk, T.: Mechanical properties of all MoS2 monolayer heterostructures: Crack propagation and existing notch study, 2022, Computers, Materials and Continua, 70 (3), pp. 4635-4655, DOI: 10.32604/cmc.2022.017682 (Scopus)
[8] Valizadeh, N., Rabczuk, T.: Isogeometric analysis of hydrodynamics of vesicles using a monolithic phase-field approach, 2022, Computer Methods in Applied Mechanics and Engineering, 388, art. no. 114191, DOI: 10.1016/j.cma.2021.114191(Scopus)
[9] Dorduncu, M., Olmus, I., Rabczuk, T.: A peridynamic approach for modeling of two dimensional functionally graded plates, 2022, Composite Structures, 279, art. no. 114743, DOI: 10.1016/j.compstruct.2021.114743 (Scopus)
[10] Shaaban, A.M., Anitescu, C., Atroshchenko, E., Rabczuk, T.: An isogeometric Burton-Miller method for the transmission loss optimization with application to mufflers with internal extended tubes, 2022, Applied Acoustics, 185, art. no. 108410, DOI: 10.1016/j.apacoust.2021.108410 (Scopus)
2021
[1] Badjian, H., Setoodeh, A.R., Bavi, O., Rabczuk, T.: Enhanced mechanical properties of epoxy-based nanocomposites reinforced with functionalized carbon nanobuds, 2021, Applied Physics A: Materials Science and Processing, 127 (12), art. no. 945, DOI: 10.1007/s00339-021-05095-3 (Scopus)
[2] Liaghat, F., Khosravifard, A., Hematiyan, M.R., Rabczuk, T.: A practical meshfree inverse method for identification of thermo-mechanical fracture load of a body by examining the crack path in the body, 2021, Engineering Analysis with Boundary Elements, 133, pp. 236-247, DOI: 10.1016/j.enganabound.2021.08.029 (Scopus)
[3] Zhang, Y., Ren, H., Areias, P., Zhuang, X., Rabczuk, T.: Quasi-static and dynamic fracture modeling by the nonlocal operator method, 2021, Engineering Analysis with Boundary Elements, 133, pp. 120-137, DOI: 10.1016/j.enganabound.2021.08.020 (Scopus)
[4] Nguyen-Thanh, V.M., Anitescu, C., Alajlan, N., Rabczuk, T., Zhuang, X.: Parametric deep energy approach for elasticity accounting for strain gradient effects, 2021, Computer Methods in Applied Mechanics and Engineering, 386, art. no. 114096, DOI: 10.1016/j.cma.2021.114096 (Scopus)
[5] Xi, Q., Fu, Z., Rabczuk, T., Yin, D.: A localized collocation scheme with fundamental solutions for long-time anomalous heat conduction analysis in functionally graded materials, 2021, International Journal of Heat and Mass Transfer, 180, art. no. 121778, DOI: 10.1016/j.ijheatmasstransfer.2021.121778 (Scopus)
[6] Javvaji, B., Mortazavi, B., Zhuang, X., Rabczuk, T.: Exploring tensile piezoelectricity and bending flexoelectricity of diamane monolayers by machine learning, 2021, Carbon, 185, pp. 558-567, DOI: 10.1016/j.carbon.2021.09.007 (Scopus)
[7] Zheng, F., Zhuang, X., Zheng, H., Jiao, Y.-Y., Rabczuk, T.: Discontinuous deformation analysis with distributed bond for the modelling of rock deformation and failure, 2021, Computers and Geotechnics, 139, art. no. 104413, DOI: 10.1016/j.compgeo.2021.104413 (Scopus)
[8] Zhuang, X., Ren, H., Rabczuk, T.: Nonlocal operator method for dynamic brittle fracture based on an explicit phase field model, 2021, European Journal of Mechanics, A/Solids, 90, art. no. 104380, DOI: 10.1016/j.euromechsol.2021.104380 (Scopus)
[9] Pan, Q., Rabczuk, T., Yang, X.: Subdivision-based isogeometric analysis for second order partial differential equations on surfaces, 2021, Computational Mechanics, 68 (5), pp. 1205-1221, DOI: 10.1007/s00466-021-02065-7 (Scopus)
[10] Es-Haghi, M.S., Abbaspour, M., Rabczuk, T.: Factors and Failure Patterns Analysis for Undrained Seismic Bearing Capacity of Strip Footing above Void, 2021, International Journal of Geomechanics, 21 (10), art. no. 04021188, DOI: 10.1061/(ASCE)GM.1943-5622.0002166 (Scopus)
[11] Karami, B., Shishegaran, A., Taghavizade, H., Rabczuk, T.: Presenting innovative ensemble model for prediction of the load carrying capacity of composite castellated steel beam under fire, 2021, Structures, 33, pp. 4031-4052, DOI: 10.1016/j.istruc.2021.07.005 (Scopus)
[12] Liu, B., Vu-Bac, N., Rabczuk, T.: A stochastic multiscale method for the prediction of the thermal conductivity of Polymer nanocomposites through hybrid machine learning algorithms, 2021, Composite Structures, 273, art. no. 114269, DOI: 10.1016/j.compstruct.2021.114269 (Scopus)
[13] Ren, H., Zhuang, X., Trung, N.-T., Rabczuk, T.: A nonlocal operator method for finite deformation higher-order gradient elasticity, 2021, Computer Methods in Applied Mechanics and Engineering, 384, art. no. 113963, DOI: 10.1016/j.cma.2021.113963 (Scopus)
[14] Shaaban, A.M., Anitescu, C., Atroshchenko, E., Rabczuk, T.: 3D isogeometric boundary element analysis and structural shape optimization for Helmholtz acoustic scattering problems, 2021, Computer Methods in Applied Mechanics and Engineering, 384, art. no. 113950, DOI: 10.1016/j.cma.2021.113950 (Scopus)
[15] Mortazavi, B., Silani, M., Podryabinkin, E.V., Rabczuk, T., Zhuang, X., Shapeev, A.V.: First-Principles Multiscale Modeling of Mechanical Properties in Graphene/Borophene Heterostructures Empowered by Machine-Learning Interatomic Potentials, 2021, Advanced Materials, 33 (35), art. no. 2102807, DOI: 10.1002/adma.202102807 (Scopus)
[16] Wu, X., Wen, Z., Jin, Y., Rabczuk, T., Zhuang, X., Djafari-Rouhani, B.: Broadband Rayleigh wave attenuation by gradient metamaterials, 2021, International Journal of Mechanical Sciences, 205, art. no. 106592, DOI: 10.1016/j.ijmecsci.2021.106592 (Scopus)
[17] Bisheh, H., Wu, N., Rabczuk, T.: A study on the effect of electric potential on vibration of smart nanocomposite cylindrical shells with closed circuit, 2021, Thin-Walled Structures, 166, art. no. 108040, DOI: 10.1016/j.tws.2021.108040 (Scopus)
[18] Majidi, R., Ramazani, A., Rabczuk, T.: Electronic properties of transition metal embedded twin T-graphene: A density functional theory study, 2021, Physica E: Low-Dimensional Systems and Nanostructures, 133, art. no. 114806, DOI: 10.1016/j.physe.2021.114806 (Scopus)
[19] Areias, P., Rosa, P.A.R., Rabczuk, T.: Fully anisotropic hyperelasto-plasticity with exponential approximation by power series and scaling/squaring, 2021, Computational Mechanics, 68 (2), pp. 391-404, DOI: 10.1007/s00466-021-02038-w (Scopus)
[20] Ren, H., Zhuang, X., Anitescu, C., Rabczuk, T.: Multi-connected boundary conditions in solid mechanics and surgery theory, 2021, Computers and Structures, 251, art. no. 106504, DOI: 10.1016/j.compstruc.2021.106504 (Scopus)
[21] Areias, P., Rabczuk, T., Ambrósio, J.: Extrapolation and Ce-based implicit integration of anisotropic constitutive behavior, 2021, International Journal for Numerical Methods in Engineering, 122 (13), pp. 3218-3240, DOI: 10.1002/nme.6661 (Scopus)
[22] Noori, H., Mortazavi, B., Keshtkari, L., Zhuang, X., Rabczuk, T.: Nanopore creation in MoS2 and graphene monolayers by nanoparticles impact: a reactive molecular dynamics study, 2021, Applied Physics A: Materials Science and Processing, 127 (7), art. no. 541, DOI: 10.1007/s00339-021-04693-5 (Scopus)
[23] Mortazavi, B., Shojaei, F., Rabczuk, T., Zhuang, X.: High tensile strength and thermal conductivity in BeO monolayer: A first-principles study, 2021, FlatChem, 28, art. no. 100257, DOI: 10.1016/j.flatc.2021.100257 (Scopus)
[24] Areias, P., Rabczuk, T.: An engineering interpretation of Nesterov’s convex minimization algorithm and time integration: application to optimal fiber orientation, 2021, Computational Mechanics, 68 (1), pp. 211-227, DOI: 10.1007/s00466-021-02027-z (Scopus)
[25] Kutlu, A., Dorduncu, M., Rabczuk, T.: A novel mixed finite element formulation based on the refined zigzag theory for the stress analysis of laminated composite plates, 2021, Composite Structures, 267, art. no. 113886, DOI: 10.1016/j.compstruct.2021.113886 (Scopus)
[26] Nikbakht, S., Anitescu, C., Rabczuk, T.: Optimizing the neural network hyperparameters utilizing genetic algorithm [ 利⽤遗传算法优化神经⽹络超参数 ], 2021, Journal of Zhejiang University: Science A, 22 (6), pp. 407-426, DOI: 10.1631/jzus.A2000384 (Scopus)
[27] Fang, J., Wu, C., Rabczuk, T., Wu, C., Sun, G., Li, Q.: Correction to: Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials (Computational Mechanics, (2020), 66, 4, (931-961), 10.1007/s00466-020-01887-1), 2021, Computational Mechanics, 67 (6), pp. 1769-1770, DOI: 10.1007/s00466-021-02011-7 (Scopus)
[28] Kolodziejczyk, F., Mortazavi, B., Rabczuk, T., Zhuang, X.: Machine learning assisted multiscale modeling of composite phase change materials for Li-ion batteries’ thermal management, 2021, International Journal of Heat and Mass Transfer, 172, art. no. 121199, DOI: 10.1016/j.ijheatmasstransfer.2021.121199 (Scopus)
[29] Pierro, A.D., Mortazavi, B., Noori, H., Rabczuk, T., Fina, A.: A multiscale investigation on the thermal transport in polydimethylsiloxane nanocomposites: Graphene vs. borophene, 2021, Nanomaterials, 11 (5), art. no. 1252, DOI: 10.3390/nano11051252 (Scopus)
[30] Zhuang, X., Guo, H., Alajlan, N., Zhu, H., Rabczuk, T.: Deep autoencoder based energy method for the bending, vibration, and buckling analysis of Kirchhoff plates with transfer learning, 2021, European Journal of Mechanics, A/Solids, 87, art. no. 104225, DOI: 10.1016/j.euromechsol.2021.104225 (Scopus)
[31] Ren, H., Zhuang, X., Trung, N.-T., Rabczuk, T.: Nonlocal operator method for the Cahn-Hilliard phase field model, 2021, Communications in Nonlinear Science and Numerical Simulation, 96, art. no. 105687, DOI: 10.1016/j.cnsns.2020.105687 (Scopus)
[32] Liaghat, F., Khosravifard, A., Hematiyan, M.R., Rabczuk, T.: An inverse procedure for identification of loads applied to a fractured component using a meshfree method, 2021, International Journal for Numerical Methods in Engineering, 122 (7), pp. 1687-1705, DOI: 10.1002/nme.6595 (Scopus)
[33] Shishegaran, A., Varaee, H., Rabczuk, T., Shishegaran, G.: High correlated variables creator machine: Prediction of the compressive strength of concrete, 2021, Computers and Structures, 247, art. no. 106479, DOI: 10.1016/j.compstruc.2021.106479 (Scopus)
[34] Ashour, M., Valizadeh, N., Rabczuk, T.: Isogeometric analysis for a phase-field constrained optimization problem of morphological evolution of vesicles in electrical fields, 2021, Computer Methods in Applied Mechanics and Engineering, 377, art. no. 113669, DOI: 10.1016/j.cma.2021.113669 (Scopus)
[35] Thai, T.Q., Zhuang, X., Rabczuk, T.: A nonlinear geometric couple stress based strain gradient Kirchhoff–Love shell formulation for microscale thin-wall structures, 2021, International Journal of Mechanical Sciences, 196, art. no. 106272, DOI: 10.1016/j.ijmecsci.2021.106272 (Scopus)
[36] Mortazavi, B., Javvaji, B., Shojaei, F., Rabczuk, T., Shapeev, A.V., Zhuang, X.: Exceptional piezoelectricity, high thermal conductivity and stiffness and promising photocatalysis in two-dimensional MoSi2N4 family confirmed by first-principles, 2021, Nano Energy, 82, art. no. 105716, DOI: 10.1016/j.nanoen.2020.105716 (Scopus)
[37] Cai, R., Jin, Y., Rabczuk, T., Zhuang, X., Djafari-Rouhani, B.: Propagation and attenuation of Rayleigh and pseudo surface waves in viscoelastic metamaterials, 2021, Journal of Applied Physics, 129 (12), art. no. 0003923, DOI: 10.1063/5.0042577 (Scopus)
[38] Salavati, M., Alajlan, N., Rabczuk, T.: Theoretical prediction of p-triphenylene-graphdiyne as an excellent anode material for li, na, k, mg, and ca batteries, 2021, Applied Sciences (Switzerland), 11 (5), art. no. 2308, pp. 1-14, DOI: 10.3390/app11052308 (Scopus)
[39] Areias, P., Rabczuk, T., Ambrósio, J.: HERK integration of finite-strain fully anisotropic plasticity models, 2021, Finite Elements in Analysis and Design, 185, art. no. 103492, DOI: 10.1016/j.finel.2020.103492 (Scopus)
[40] Bahari, Y., Mortazavi, B., Rajabpour, A., Zhuang, X., Rabczuk, T.: Application of two-dimensional materials as anodes for rechargeable metal-ion batteries: A comprehensive perspective from density functional theory simulations, 2021, Energy Storage Materials, 35, pp. 203-282, DOI: 10.1016/j.ensm.2020.11.004 (Scopus)
[41] Zheng, F., Zhuang, X., Zheng, H., Jiao, Y.-Y., Rabczuk, T.: A robust potential-based contact force solution approach for discontinuous deformation analysis of irregular convex polygonal block/particle systems, 2021, Acta Geotechnica, 16 (3), pp. 679-697, DOI: 10.1007/s11440-020-00997-7 (Scopus)
[42] Hamdia, K.M., Zhuang, X., Rabczuk, T.: An efficient optimization approach for designing machine learning models based on genetic algorith, 2021, Neural Computing and Applications, 33 (6), pp. 1923-1933, DOI: 10.1007/s00521-020-05035-x (Scopus)
[43] Shafei, E., Faroughi, S., Rabczuk, T.: Nonlinear transient vibration of viscoelastic plates: A NURBS-based isogeometric HSDT approach, 2021, Computers and Mathematics with Applications, 84, pp. 1-15, DOI: 10.1016/j.camwa.2020.12.006 (Scopus)
[44] Naghsh, M.A., Shishegaran, A., Karami, B., Rabczuk, T., Shishegaran, A., Taghavizadeh, H., Moradi, M.: An innovative model for predicting the displacement and rotation of column-tree moment connection under fire, 2021, Frontiers of Structural and Civil Engineering, 15 (1), pp. 194-212, DOI: 10.1007/s11709-020-0688-2 (Scopus)
[45] He, L., Wen, Z., Jin, Y., Torrent, D., Zhuang, X., Rabczuk, T.: Inverse design of topological metaplates for flexural waves with machine learning, 2021, Materials and Design, 199, art. no. 109390, DOI: 10.1016/j.matdes.2020.109390 (Scopus)
[46] Zhuang, X., Zheng, F., Zheng, H., Jiao, Y.-Y., Rabczuk, T., Wriggers, P.: A cover-based contact detection approach for irregular convex polygons in discontinuous deformation analysis, 2021, International Journal for Numerical and Analytical Methods in Geomechanics, 45 (2), pp. 208-233, DOI: 10.1002/nag.3157 (Scopus)
[47] Zhou, X., Lu, D., Zhang, Y., Du, X., Rabczuk, T.: An open-source unconstrained stress updating algorithm for the modified Cam-clay model, 2021, Computer Methods in Applied Mechanics and Engineering, art. no. 114356, DOI: 10.1016/j.cma.2021.114356 (Scopus)
[48] Shafei, E., Shirzad, A., Rabczuk, T.: Dynamic stability optimization of laminated composite plates: An isogeometric HSDT formulation and PSO algorithm, 2022, Composite Structures, 280, art. no. 114935, DOI: 10.1016/j.compstruct.2021.114935 (Scopus)
[49] Pan, Q., Rabczuk, T., Chen, C.: Subdivision based isogeometric analysis for geometric flows, 2021, International Journal for Numerical Methods in Engineering, DOI: 10.1002/nme.6870 (Scopus)
[50] Javvaji, B., Vasireddi, R., Zhuang, X., Mahapatra, D.R., Rabczuk, T.: Laser-assisted graphene layer exfoliation from graphite slab, 2021, Molecular Simulation, 47 (18), pp. 1540-1548, DOI: 10.1080/08927022.2021.1991920 (Scopus)
[51] Ren, H., Zhuang, X., Oterkus, E., Zhu, H., Rabczuk, T.: Nonlocal strong forms of thin plate, gradient elasticity, magneto-electro-elasticity and phase-field fracture by nonlocal operator method, 2021, Engineering with Computers, DOI: 10.1007/s00366-021-01502-8 (Scopus)
[52] Shishegaran, A., Karami, B., Safari Danalou, E., Varaee, H., Rabczuk, T.: Computational predictions for predicting the performance of steel 1 panel shear wall under explosive loads, 2021, Engineering Computations (Swansea, Wales), 38 (9), pp. 3564-3589, DOI: 10.1108/EC-09-2020-0492 (Scopus)
[53] Wu, X., Jin, Y., Khelif, A., Zhuang, X., Rabczuk, T., Djafari-Rouhani, B.: Topological surface wave metamaterials for robust vibration attenuation and energy harvesting, 2021, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2021.1937758 (Scopus)
[54] Wen, Z., Jin, Y., Gao, P., Zhuang, X., Rabczuk, T., Djafari-Rouhani, B.: Topological cavities in phononic plates for robust energy harvesting, 2021, Mechanical Systems and Signal Processing, 162, art. no. 108047, DOI: 10.1016/j.ymssp.2021.108047 (Scopus)
[55] Alibagheri, E., Mortazavi, B., Rabczuk, T.: Predicting the electronic and structural properties of two-dimensional materials using machine learning, 2021, Computers, Materials and Continua, 67 (1), pp. 1287-1300, DOI: 10.32604/cmc.2021.013564 (Scopus)
[56] Thai, T.Q., Zhuang, X., Park, H.S., Rabczuk, T.: A staggered explicit-implicit isogeometric formulation for large deformation flexoelectricity, 2021, Engineering Analysis with Boundary Elements, 122, pp. 1-12, DOI: 10.1016/j.enganabound.2020.10.004 (Scopus)
[57] Ebrahimi, F., Dabbagh, A., Rabczuk, T.: On wave dispersion characteristics of magnetostrictive sandwich nanoplates in thermal environments, 2021, European Journal of Mechanics, A/Solids, 85, art. no. 104130, DOI: 10.1016/j.euromechsol.2020.104130 (Scopus)
[58] Areias, P., Rodrigues, H.C., Rabczuk, T.: Coupled finite-element/topology optimization of continua using the Newton-Raphson method, 2021, European Journal of Mechanics, A/Solids, 85, art. no. 104117, DOI: 10.1016/j.euromechsol.2020.104117 (Scopus)
[59] Xu, G., Ling, R., Zhang, Y.J., Xiao, Z., Ji, Z., Rabczuk, T.: Singularity Structure Simplification of Hexahedral Meshes via Weighted Ranking, 2021, CAD Computer Aided Design, 130, art. no. 102946, DOI: 10.1016/j.cad.2020.102946 (Scopus)
[60] Mohebbi, F., Evans, B., Rabczuk, T.: Solving direct and inverse heat conduction problems in functionally graded materials using an accurate and robust numerical method, 2021, International Journal of Thermal Sciences, 159, art. no. 106629, DOI: 10.1016/j.ijthermalsci.2020.106629 (Scopus)
[61] Brighenti, R., Rabczuk, T., Zhuang, X.: Phase field approach for simulating failure of viscoelastic elastomers, 2021, European Journal of Mechanics, A/Solids, 85, art. no. 104092, DOI: 10.1016/j.euromechsol.2020.104092 (Scopus)
[62] Mortazavi, B., Podryabinkin, E.V., Novikov, I.S., Rabczuk, T., Zhuang, X., Shapeev, A.V.: Accelerating first-principles estimation of thermal conductivity by machine-learning interatomic potentials: A MTP/ShengBTE solution, 2021, Computer Physics Communications, 258, art. no. 107583, DOI: 10.1016/j.cpc.2020.107583 (Scopus)
[63] López, J., Anitescu, C., Rabczuk, T.: Isogeometric structural shape optimization using automatic sensitivity analysis, 2021, Applied Mathematical Modelling, 89, pp. 1004-1024, DOI: 10.1016/j.apm.2020.07.027 (Scopus)
2020
[1] Jenabidehkordi, A., Abadi, R., Rabczuk, T.: Computational modeling of meso-scale fracture in polymer matrix composites employing peridynamics, 2020, Composite Structures, 253, art. no. 112740, DOI: 10.1016/j.compstruct.2020.112740 (Scopus)
[2] Minh Nguyen-Thanh, V., Trong Khiem Nguyen, L., Rabczuk, T., Zhuang, X.: A surrogate model for computational homogenization of elastostatics at finite strain using high-dimensional model representation-based neural network, 2020, International Journal for Numerical Methods in Engineering, 121 (21), pp. 4811-4842, DOI: 10.1002/nme.6493 (Scopus)
[3] Shaaban, A.M., Anitescu, C., Atroshchenko, E., Rabczuk, T.: Isogeometric boundary element analysis and shape optimization by PSO for 3D axi-symmetric high frequency Helmholtz acoustic problems, 2020, Journal of Sound and Vibration, 486, art. no. 115598, DOI: 10.1016/j.jsv.2020.115598 (Scopus)
[4] Zhuang, X., Nanthakumar, S.S., Rabczuk, T.: A meshfree formulation for large deformation analysis of flexoelectric structures accounting for the surface effects, 2020, Engineering Analysis with Boundary Elements, 120, pp. 153-165, DOI: 10.1016/j.enganabound.2020.07.021 (Scopus)
[5] Nguyen, C., Zhuang, X., Chamoin, L., Zhao, X., Nguyen-Xuan, H., Rabczuk, T.: Three-dimensional topology optimization of auxetic metamaterial using isogeometric analysis and model order reduction, 2020, Computer Methods in Applied Mechanics and Engineering, 371, art. no. 113306, DOI: 10.1016/j.cma.2020.113306 (Scopus)
[6] Meng, Q., Wang, H., Cai, M., Xu, W., Zhuang, X., Rabczuk, T.: Three-dimensional mesoscale computational modeling of soil-rock mixtures with concave particles, 2020, Engineering Geology, 277, art. no. 105802, DOI: 10.1016/j.enggeo.2020.105802 (Scopus)
[7] Mortazavi, B., Shojaei, F., Javvaji, B., Azizi, M., Zhan, H., Rabczuk, T., Zhuang, X.: First-principles investigation of mechanical, electronic and optical properties of H-, F- and Cl-diamane, 2020, Applied Surface Science, 528, art. no. 147035, DOI: 10.1016/j.apsusc.2020.147035 (Scopus)
[8] Mortazavi, B., Shojaei, F., Shahrokhi, M., Azizi, M., Rabczuk, T., Shapeev, A.V., Zhuang, X.: Nanoporous C3N4, C3N5 and C3N6 nanosheets; novel strong semiconductors with low thermal conductivities and appealing optical/electronic properties, 2020, Carbon, 167, pp. 40-50, DOI: 10.1016/j.carbon.2020.05.105 (Scopus)
[9] Fang, J., Wu, C., Rabczuk, T., Wu, C., Sun, G., Li, Q.: Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials, 2020, Computational Mechanics, 66 (4), pp. 931-961, DOI: 10.1007/s00466-020-01887-1 (Scopus)
[10] Medina, D., Valizadeh, N., Samaniego, E., Jerves, A.X., Rabczuk, T.: Isogeometric analysis of insoluble surfactant spreading on a thin film, 2020, Computer Methods in Applied Mechanics and Engineering, 370, art. no. 113272, DOI: 10.1016/j.cma.2020.113272 (Scopus)
[11] Meng, Q.-X., Xu, W.-Y., Wang, H.-L., Zhuang, X.-Y., Xie, W.-C., Rabczuk, T.: DigiSim — An Open Source Software Package for Heterogeneous Material Modeling Based on Digital Image Processing, 2020, Advances in Engineering Software, 148, art. no. 102836, DOI: 10.1016/j.advengsoft.2020.102836 (Scopus)
[12] Majidi, R., Rabczuk, T.: Tailoring the band gap of α2-graphyne through functionalization with carbene groups: a density functional theory study, 2020, Chemical Papers, 74 (10), pp. 3581-3587, DOI: 10.1007/s11696-020-01195-1 (Scopus)
[13] López, J., Anitescu, C., Valizadeh, N., Rabczuk, T., Alajlan, N.: Structural shape optimization using Bézier triangles and a CAD-compatible boundary representation, 2020, Engineering with Computers, 36 (4), pp. 1657-1672, DOI: 10.1007/s00366-019-00788-z (Scopus)
[14] Mortazavi, B., Podryabinkin, E.V., Roche, S., Rabczuk, T., Zhuang, X., Shapeev, A.V.: Machine-learning interatomic potentials enable first-principles multiscale modeling of lattice thermal conductivity in graphene/borophene heterostructures, 2020, Materials Horizons, 7 (9), pp. 2359-2367, DOI: 10.1039/d0mh00787k (Scopus)
[15] Fu, Z., Xi, Q., Li, Y., Huang, H., Rabczuk, T.: Hybrid FEM–SBM solver for structural vibration induced underwater acoustic radiation in shallow marine environment, 2020, Computer Methods in Applied Mechanics and Engineering, 369, art. no. 113236, DOI: 10.1016/j.cma.2020.113236 (Scopus)
[16] Mortazavi, B., Novikov, I.S., Podryabinkin, E.V., Roche, S., Rabczuk, T., Shapeev, A.V., Zhuang, X.: Exploring phononic properties of two-dimensional materials using machine learning interatomic potentials, 2020, Applied Materials Today, 20, art. no. 100685, DOI: 10.1016/j.apmt.2020.100685 (Scopus)
[17] Sheikh Khozani, Z., Khosravi, K., Torabi, M., Mosavi, A., Rezaei, B., Rabczuk, T.: Shear stress distribution prediction in symmetric compound channels using data mining and machine learning models, 2020, Frontiers of Structural and Civil Engineering, 14 (5), pp. 1097-1109, DOI: 10.1007/s11709-020-0634-3 (Scopus)
[18] Shishegaran, A., Karami, B., Rabczuk, T., Shishegaran, A., Naghsh, M.A., Mohammad Khani, M.: Performance of fixed beam without interacting bars, 2020, Frontiers of Structural and Civil Engineering, 14 (5), pp. 1180-1195, DOI: 10.1007/s11709-020-0661-0 (Scopus)
[19] Es-Haghi, M.S., Shishegaran, A., Rabczuk, T.: Evaluation of a novel Asymmetric Genetic Algorithm to optimize the structural design of 3D regular and irregular steel frames, 2020, Frontiers of Structural and Civil Engineering, 14 (5), pp. 1110-1130, DOI: 10.1007/s11709-020-0643-2 (Scopus)
[20] Javvaji, B., Mortazavi, B., Rabczuk, T., Zhuang, X.: Exploration of mechanical, thermal conductivity and electromechanical properties of graphene nanoribbon springs, 2020, Nanoscale Advances, 2 (8), pp. 3394-3403, DOI: 10.1039/d0na00217h (Scopus)
[21] Xu, J., Ling, C., Xu, G., Ji, Z., Wu, X., Rabczuk, T.: Dynamic spline bas-relief modeling with isogeometric collocation method, 2020, Computer Aided Geometric Design, 81, art. no. 101913, DOI: 10.1016/j.cagd.2020.101913 (Scopus)
[22] Shamshirband, S., Mosavi, A., Rabczuk, T.: Particle swarm optimization model to predict scour depth around a bridge pier, 2020, Frontiers of Structural and Civil Engineering, 14 (4), pp. 855-866, DOI: 10.1007/s11709-020-0619-2 (Scopus)
[23] Alambeigi, K., Mohammadimehr, M., Bamdad, M., Rabczuk, T.: Free and forced vibration analysis of a sandwich beam considering porous core and SMA hybrid composite face layers on Vlasov’s foundation, 2020, Acta Mechanica, 231 (8), pp. 3199-3218, DOI: 10.1007/s00707-020-02697-5 (Scopus)
[24] Ren, H., Zhuang, X., Rabczuk, T.: A higher order nonlocal operator method for solving partial differential equations, 2020, Computer Methods in Applied Mechanics and Engineering, 367, art. no. 113132, DOI: 10.1016/j.cma.2020.113132 (Scopus)
[25] López, J., Anitescu, C., Rabczuk, T.: CAD-compatible structural shape optimization with a movable Bézier tetrahedral mesh, 2020, Computer Methods in Applied Mechanics and Engineering, 367, art. no. 113066, DOI: 10.1016/j.cma.2020.113066 (Scopus)
[26] Voyiadjis, G.Z., Oucif, C., Kattan, P.I., Rabczuk, T.: Damage and healing mechanics in plane stress, plane strain, and isotropic elasticity, 2020, International Journal of Damage Mechanics, 29 (8), pp. 1246-1270, DOI: 10.1177/1056789520905347 (Scopus)
[27] Carapau, F., Correia, P., Rabczuk, T., Areias, P.: One-dimensional model for the unsteady flow of a generalized third-grade viscoelastic fluid, 2020, Neural Computing and Applications, 32 (16), pp. 12881-12894, DOI: 10.1007/s00521-020-04733-w (Scopus)
[28] Ansari, E., Setoodeh, A.R., Rabczuk, T.: Isogeometric-stepwise vibrational behavior of rotating functionally graded blades with variable thickness at an arbitrary stagger angle subjected to thermal environment, 2020, Composite Structures, 244, art. no. 112281, DOI: 10.1016/j.compstruct.2020.112281 (Scopus)
[29] Roudbari, M.A., Jorshari, T.D., Arani, A.G., Lü, C., Rabczuk, T.: Transient responses of two mutually interacting single-walled boron nitride nanotubes induced by a moving nanoparticle, 2020, European Journal of Mechanics, A/Solids, 82, art. no. 103978, DOI: 10.1016/j.euromechsol.2020.103978 (Scopus)
[30] Nguyen, B.H., Zhuang, X., Park, H.S., Rabczuk, T.: Topologically switchable behavior induced by an elastic instability in a phononic waveguide, 2020, Journal of Applied Physics, 127 (24), art. no. 245109, DOI: 10.1063/5.0005331 (Scopus)
[31] Wu, Y., Chen, Y., Ma, C., Lu, Z., Zhang, H., Mortazavi, B., Hou, B., Xu, K., Mei, H., Rabczuk, T., Zhu, H., Fang, Z., Zhang, R., Soukoulis, C.M.: Monolayer C7 N6: Room-temperature excitons with large binding energies and high thermal conductivities, 2020, Physical Review Materials, 4 (6), art. no. 064001, DOI: 10.1103/PhysRevMaterials.4.064001 (Scopus)
[32] Mauludin, L.M., Oucif, C., Rabczuk, T.: The effects of mismatch fracture properties in encapsulation-based self-healing concrete using cohesive-zone model, 2020, Frontiers of Structural and Civil Engineering, 14 (3), pp. 792-801, DOI: 10.1007/s11709-020-0629-0 (Scopus)
[33] Zhou, S., Zhuang, X., Rabczuk, T.: Phase field method for quasi-static hydro-fracture in porous media under stress boundary condition considering the effect of initial stress field, 2020, Theoretical and Applied Fracture Mechanics, 107, art. no. 102523, DOI: 10.1016/j.tafmec.2020.102523 (Scopus)
[34] Ren, H., Zhuang, X., Rabczuk, T.: Nonlocal operator method with numerical integration for gradient solid, 2020, Computers and Structures, 233, art. no. 106235, DOI: 10.1016/j.compstruc.2020.106235 (Scopus)
[35] Abadi, R., Jenabidehkordi, A., Rabczuk, T.: Investigation into the fracture mechanism and thermal conductivity of borophene nanofilm; a reactive molecular dynamics simulation, 2020, Computational Materials Science, 178, art. no. 109625, DOI: 10.1016/j.commatsci.2020.109625 (Scopus)
[36] Shafei, E., Faroughi, S., Rabczuk, T.: Multi-patch NURBS formulation for anisotropic variable angle tow composite plates, 2020, Composite Structures, 241, art. no. 111964, DOI: 10.1016/j.compstruct.2020.111964 (Scopus)
[37] Goswami, S., Anitescu, C., Rabczuk, T.: Adaptive fourth-order phase field analysis using deep energy minimization, 2020, Theoretical and Applied Fracture Mechanics, 107, art. no. 102527, DOI: 10.1016/j.tafmec.2020.102527 (Scopus)
[38] Karimi, M.T., Rabczuk, T., Pourabbas, B.: Evaluation of the efficiency of various force configurations on scoliotic, lordotic and kyphotic curves in the subjects with scoliosis, 2020, Spine Deformity, 8 (3), pp. 361-367, DOI: 10.1007/s43390-020-00072-x (Scopus)
[39] Mortazavi, B., Bafekry, A., Shahrokhi, M., Rabczuk, T., Zhuang, X.: ZnN and ZnP as novel graphene-like materials with high Li-ion storage capacities, 2020, Materials Today Energy, 16, art. no. 100392, DOI: 10.1016/j.mtener.2020.100392 (Scopus)
[40] Zheng, F., Zhuang, X., Zheng, H., Jiao, Y.-Y., Rabczuk, T.: Kinetic analysis of polyhedral block system using an improved potential-based penalty function approach for explicit discontinuous deformation analysis, 2020, Applied Mathematical Modelling, 82, pp. 314-335, DOI: 10.1016/j.apm.2020.01.026 (Scopus)
[41] Mauludin, L.M., Budiman, B.A., Santosa, S.P., Zhuang, X., Rabczuk, T.: Numerical modeling of microcrack behavior in encapsulation-based self-healing concrete under uniaxial tension, 2020, Journal of Mechanical Science and Technology, 34 (5), pp. 1847-1853, DOI: 10.1007/s12206-020-0405-z (Scopus)
[42] Shishegaran, A., Khalili, M.R., Karami, B., Rabczuk, T., Shishegaran, A.: Computational predictions for estimating the maximum deflection of reinforced concrete panels subjected to the blast load, 2020, International Journal of Impact Engineering, 139, art. no. 103527, DOI: 10.1016/j.ijimpeng.2020.103527 (Scopus)
[43] Lv, J.-H., Jiao, Y.-Y., Rabczuk, T., Zhuang, X.-Y., Feng, X.-T., Tan, F.: A general algorithm for numerical integration of three-dimensional crack singularities in PU-based numerical methods, 2020, Computer Methods in Applied Mechanics and Engineering, 363, art. no. 112908, DOI: 10.1016/j.cma.2020.112908 (Scopus)
[44] Areias, P., Silvestre, N., Rabczuk, T.: Gradient-enhanced Raviart-Thomas tetrahedron for finite-strain problems, 2020, Computers and Structures, 231, art. no. 106212, DOI: 10.1016/j.compstruc.2020.106212 (Scopus)
[45] Bisheh, H., Rabczuk, T., Wu, N.: Effects of nanotube agglomeration on wave dynamics of carbon nanotube-reinforced piezocomposite cylindrical shell, 2020, Composites Part B: Engineering, 187, art. no. 107739, DOI: 10.1016/j.compositesb.2019.107739 (Scopus)
[46] Samaniego, E., Anitescu, C., Goswami, S., Nguyen-Thanh, V.M., Guo, H., Hamdia, K., Zhuang, X., Rabczuk, T.: An energy approach to the solution of partial differential equations in computational mechanics via machine learning: Concepts, implementation and applications, 2020, Computer Methods in Applied Mechanics and Engineering, 362, art. no. 112790, DOI: 10.1016/j.cma.2019.112790 (Scopus)
[47] Mortazavi, B., Podryabinkin, E.V., Novikov, I.S., Roche, S., Rabczuk, T., Zhuang, X., Shapeev, A.V.: Efficient machine-learning based interatomic potentialsfor exploring thermal conductivity in two-dimensional materials, 2020, JPhys Materials, 3 (2), art. no. 02LT02, DOI: 10.1088/2515-7639/ab7cbb (Scopus)
[48] Zhuang, X., Nguyen, L.C., Nguyen-Xuan, H., Alajlan, N., Rabczuk, T.: Efficient deep learning for gradient-enhanced stress dependent damage model, 2020, Applied Sciences (Switzerland), 10 (7), art. no. 2556, DOI: 10.3390/app10072556 (Scopus)
[49] Thai, T.Q., Rabczuk, T., Zhuang, X.: Isogeometric cohesive zone model for thin shell delamination analysis based on Kirchhoff-Love shell model, 2020, Frontiers of Structural and Civil Engineering, 14 (2), pp. 267-279, DOI: 10.1007/s11709-019-0567-x (Scopus)
[50] Goswami, S., Anitescu, C., Chakraborty, S., Rabczuk, T.: Transfer learning enhanced physics informed neural network for phase-field modeling of fracture, 2020, Theoretical and Applied Fracture Mechanics, 106, art. no. 102447, DOI: 10.1016/j.tafmec.2019.102447 (Scopus)
[51] Mostafa Shaaban, A., Anitescu, C., Atroshchenko, E., Rabczuk, T.: Shape optimization by conventional and extended isogeometric boundary element method with PSO for two-dimensional Helmholtz acoustic problems, 2020, Engineering Analysis with Boundary Elements, 113, pp. 156-169, DOI: 10.1016/j.enganabound.2019.12.012 (Scopus)
[52] Goswami, S., Anitescu, C., Rabczuk, T.: Adaptive fourth-order phase field analysis for brittle fracture, 2020, Computer Methods in Applied Mechanics and Engineering, 361, art. no. 112808, DOI: 10.1016/j.cma.2019.112808 (Scopus)
[53] Zhuang, X., Nguyen, B.H., Nanthakumar, S.S., Tran, T.Q., Alajlan, N., Rabczuk, T.: Computational modeling of flexoelectricity-A review, 2020, Energies, 16 (3), art. no. 1326, DOI: 10.3390/en13061326 (Scopus)
[54] Wu, Y., Ma, C., Chen, Y., Mortazavi, B., Lu, Z., Zhang, X., Xu, K., Zhang, H., Liu, W., Rabczuk, T., Zhu, H., Fang, Z., Zhang, R.: New group V graphyne: two-dimensional direct semiconductors with remarkable carrier mobilities, thermoelectric performance, and thermal stability, 2020, Materials Today Physics, 12, art. no. 100164, DOI: 10.1016/j.mtphys.2019.100164 (Scopus)
[55] Liu, B., Vu-Bac, N., Zhuang, X., Rabczuk, T.: Stochastic multiscale modeling of heat conductivity of Polymeric clay nanocomposites, 2020, Mechanics of Materials, 142, art. no. 103280, DOI: 10.1016/j.mechmat.2019.103280 (Scopus)
[56] Nguyen-Thanh, V.M., Zhuang, X., Rabczuk, T.: A deep energy method for finite deformation hyperelasticity, 2020, European Journal of Mechanics, A/Solids, 80, art. no. 103874, DOI: 10.1016/j.euromechsol.2019.103874 (Scopus)
[57] Phung-Van, P., Thai, C.H., Ferreira, A.J.M., Rabczuk, T.: Isogeometric nonlinear transient analysis of porous FGM plates subjected to hygro-thermo-mechanical loads, 2020, Thin-Walled Structures, 148, art. no. 106497, DOI: 10.1016/j.tws.2019.106497 (Scopus)
[58] Yaghoubi, V., Silani, M., Zolfaghari, H., Jamshidian, M., Rabczuk, T.: Nonlinear interphase effects on plastic hardening of nylon 6/clay nanocomposites: A computational stochastic analysis, 2020, Journal of Composite Materials, 54 (6), pp. 753-763, DOI: 10.1177/0021998319868523 (Scopus)
[59] Mortazavi, B., Shojaei, F., Azizi, M., Rabczuk, T., Zhuang, X.: As2S3, As2Se3 and As2Te3 nanosheets: Superstretchable semiconductors with anisotropic carrier mobilities and optical properties, 2020, Journal of Materials Chemistry C, 8 (7), pp. 2400-2410, DOI: 10.1039/c9tc05904k (Scopus)
[60] Safarpour, M., Rahimi, A., Arani, O.N., Rabczuk, T.: Frequency characteristics of multiscale hybrid nanocomposite annular plate based on a halpin-tsai homogenization model with the aid of GDQM, 2020, Applied Sciences (Switzerland), 10 (4), art. no. 1412, DOI: 10.3390/app10041412 (Scopus)
[61] Karami, B., Janghorban, M., Rabczuk, T.: Dynamics of two-dimensional functionally graded tapered Timoshenko nanobeam in thermal environment using nonlocal strain gradient theory, 2020, Composites Part B: Engineering, 182, art. no. 107622, DOI: 10.1016/j.compositesb.2019.107622 (Scopus)
[62] Rabizadeh, E., Bagherzadeh, A.S., Anitescu, C., Alajlan, N., Rabczuk, T.: Pointwise dual weighted residual based goal-oriented a posteriori error estimation and adaptive mesh refinement in 2D/3D thermo-mechanical multifield problems, 2020, Computer Methods in Applied Mechanics and Engineering, 359, art. no. 112666, DOI: 10.1016/j.cma.2019.112666 (Scopus)
[63] Faroughi, S., Shafei, E., Rabczuk, T.: Anisotropic solid-like shells modeled with NURBS-based isogeometric approach: Vibration, buckling, and divergence analyses, 2020, Computer Methods in Applied Mechanics and Engineering, 359, art. no. 112668, DOI: 10.1016/j.cma.2019.112668 (Scopus)
[64] Ghasemi, H., Park, H.S., Alajlan, N., Rabczuk, T.: A Computational Framework for Design and Optimization of Flexoelectric Materials, 2020, International Journal of Computational Methods, 17 (1), art. no. 1850097, DOI: 10.1142/S0219876218500974 (Scopus)
[65] Ardabili, S.F., Mosavi, A., Ghamisi, P., Ferdinand, F., Varkonyi-Koczy, A.R., Reuter, U., Rabczuk, T., Atkinson, P.M.: COVID-19 outbreak prediction with machine learning, 2020, Algorithms, 13 (10), art. no. 249, DOI: 10.3390/a13100249 (Scopus)
[66] Karimi, M.T., Rabczuk, T.: Evaluation of the efficiency of Boston brace on scoliotic curve control: A review of literature, 2020, Journal of Spinal Cord Medicine, 43 (6), pp. 824-831, DOI: 10.1080/10790268.2019.1578104 (Scopus)
[67] Noori, H., Mortazavi, B., Pierro, A.D., Jomehzadeh, E., Zhuang, X., Goangseup, Z., Sang-Hyun, K., Rabczuk, T.: A systematic molecular dynamics investigation on the graphene polymer nanocomposites for bulletproofing, 2020, Computers, Materials and Continua, 65 (3), pp. 2009-2032, DOI: 10.32604/cmc.2020.011256 (Scopus)
[68] Karimi, M.T., Rabczuk, T., Luthfi, M.: Evaluation of the effects of various force configurations and magnitudes on scoliotic curve correction by use of finite element analysis: A case study, 2020, Current Orthopaedic Practice, 31 (5), pp. 457-462, DOI: 10.1097/BCO.0000000000000903 (Scopus)
[69] Bisheh, H., Luo, Y., Rabczuk, T.: Hip Fracture Risk Assessment Based on Different Failure Criteria Using QCT-Based Finite Element Modeling, 2020, Computers, Materials and Continua, 63 (2), pp. 567-591, DOI: 10.32604/cmc.2020.09393
[70] Ghasemi, H., Park, H.S., Zhuang, X., Rabczuk, T.: Three-dimensional isogeometric analysis of flexoelectricity with MATLAB implementation, 2020, Computers, Materials and Continua, 65 (2), pp. 1157-1179, DOI: 10.32604/cmc.2020.08358 (Scopus)
[71] Shamshirband, S., Mosavi, A., Rabczuk, T., Nabipour, N., Chau, K.-W.: Prediction of significant wave height; comparison between nested grid numerical model, and machine learning models of artificial neural networks, extreme learning and support vector machines, 2020, Engineering Applications of Computational Fluid Mechanics, 14 (1), pp. 805-817, DOI: 10.1080/19942060.2020.1773932 (Scopus)
[72] Arefi, M., Mohammadi, M., Tabatabaeian, A., Rabczuk, T.: Free vibration analysis of FG-CNTRC cylindrical pressure vessels resting on Pasternak foundation with various boundary conditions, 2020, Computers, Materials and Continua, 62 (3), pp. 1001-1023, DOI: 10.32604/cmc.2020.08052 (Scopus)
[73] Karami, B., Janghorban, M., Rabczuk, T.: Forced vibration analysis of functionally graded anisotropic nanoplates resting on Winkler/Pasternak-foundation, 2020, Computers, Materials and Continua, 62 (2), pp. 607-629, DOI: 10.32604/cmc.2020.08032 (Scopus)
[74] Ren, H., Zhuang, X., Rabczuk, T.: A nonlocal operator method for solving partial differential equations, 2020, Computer Methods in Applied Mechanics and Engineering, 358, art. no. 112621, DOI: 10.1016/j.cma.2019.112621 (Scopus)
2019
[1] Dineva, A., Mosavi, A., Gyimesi, M., Vajda, I., Nabipour, N., Rabczuk, T.: Fault diagnosis of rotating electrical machines using multi-label classification, 2019, Applied Sciences (Switzerland), 9 (23), art. no. 5086, DOI: 10.3390/app9235086 (Scopus)
[2] Mirakhory, M., Khatibi, M.M., Rabczuk, T.: Attenuation of nanoparticle mass detection by single layer graphene sheets via mono-vacancy and plate geometr, 2019, Diamond and Related Materials, 100, art. no. 107559, DOI: 10.1016/j.diamond.2019.107559 (Scopus)
[3] Qi, G., Rabczuk, T.: Ab initio investigation of lithium adsorption on short carbon nanotubes considering effects of the tube length, 2019, Carbon, 155, pp. 727-733, DOI: 10.1016/j.carbon.2019.08.027 (Scopus)
[4] Areias, P., Pinto da Costa, A., Rabczuk, T., César de Sá, J.: A simple and robust Coulomb frictional algorithm based on 3 additional degrees-of-freedom and smoothing, 2019, Finite Elements in Analysis and Design, 167, art. no. 103321, DOI: 10.1016/j.finel.2019.103321 (Scopus)
[5] Chan, C.L., Anitescu, C., Rabczuk, T.: Strong multipatch C1-coupling for isogeometric analysis on 2D and 3D domains, 2019, Computer Methods in Applied Mechanics and Engineering, 357, art. no. 112599, DOI: 10.1016/j.cma.2019.112599 (Scopus)
[6] Pan, Q., Rabczuk, T., Xu, G., Chen, C.: Isogeometric analysis for surface PDEs with extended Loop subdivision, 2019, Journal of Computational Physics, 398, art. no. 108892, DOI: 10.1016/j.jcp.2019.108892 (Scopus)
[7] Liaghat, F., Hematiyan, M.R., Khosravifard, A., Rabczuk, T.: A robust meshfree method for analysis of cohesive crack propagation problems, 2019, Theoretical and Applied Fracture Mechanics, 104, art. no. 102328, DOI: 10.1016/j.tafmec.2019.102328 (Scopus)
[8] Majidi, R., Rabczuk, T.: Structural and electronic properties of BN co-doped and BN analogue of twin graphene sheets: A density functional theory study, 2019, Journal of Physics and Chemistry of Solids, 135, art. no. 109115, DOI: 10.1016/j.jpcs.2019.109115 (Scopus)
[9] Pawar, A., Zhang, Y.J., Anitescu, C., Rabczuk, T.: Joint image segmentation and registration based on a dynamic level set approach using truncated hierarchical B-splines, 2019, Computers and Mathematics with Applications, 78 (10), pp. 3250-3267, DOI: 10.1016/j.camwa.2019.04.026 (Scopus)
[10] Vu-Bac, N., Zhuang, X., Rabczuk, T.: Uncertainty quantification for mechanical properties of polyethylene based on fully atomistic mode, 2019, Materials, 12 (21), art. no. 3613, DOI: 10.3390/ma12213613 (Scopus)
[11] Arefi, M., Mohammadi, M., Amir-Ahmadi, S., Rabczuk, T.: FSDT electro-elastic analysis of FG-CNTRC cylindrical three-layered pressure vessels with piezoelectric face-sheets, 2019, Thin-Walled Structures, 144, art. no. 106320, DOI: 10.1016/j.tws.2019.106320 (Scopus)
[12] Ren, H., Zhuang, X., Rabczuk, T., Zhu, H.: Dual-support smoothed particle hydrodynamics in solid: variational principle and implicit formulation, 2019, Engineering Analysis with Boundary Elements, 108, pp. 15-29, DOI: 10.1016/j.enganabound.2019.05.024 (Scopus)
[13] Areias, P., Rabczuk, T., Carapau, F., Lopes, J.C.: A continuous-stress tetrahedron for finite strain problems, 2019, Finite Elements in Analysis and Design, 165, pp. 52-64, DOI: 10.1016/j.finel.2019.07.003 (Scopus)
[14] Hamdia, K.M., Ghasemi, H., Bazi, Y., AlHichri, H., Alajlan, N., Rabczuk, T.: A novel deep learning based method for the computational material design of flexoelectric nanostructures with topology optimization, 2019, Finite Elements in Analysis and Design, 165, pp. 21-30, DOI: 10.1016/j.finel.2019.07.001 (Scopus)
[15] Karami, B., Janghorban, M., Rabczuk, T.: Static analysis of functionally graded anisotropic nanoplates using nonlocal strain gradient theory, 2019, Composite Structures, 227, art. no. 111249, DOI: 10.1016/j.compstruct.2019.111249 (Scopus)
[16] Karami, B., Janghorban, M., Rabczuk, T.: Analysis of elastic bulk waves in functionally graded triclinic nanoplates using a quasi-3D bi-Helmholtz nonlocal strain gradient model, 2019, European Journal of Mechanics, A/Solids, 78, art. no. 103822, DOI: 10.1016/j.euromechsol.2019.103822 (Scopus)
[17] Salavati, M., Rabczuk, T.: First-principles investigation of N-triphenylene-graphdiyne nanosheets as an anode material for Na, K, Mg and Ca storage, 2019, Computational Materials Science, 169, art. no. 109093, DOI: 10.1016/j.commatsci.2019.109093 (Scopus)
[18] Xi, Q., Fu, Z.-J., Rabczuk, T.: An efficient boundary collocation scheme for transient thermal analysis in large-size-ratio functionally graded materials under heat source load, 2019, Computational Mechanics, 64 (5), pp. 1221-1235, DOI: 10.1007/s00466-019-01701-7 (Scopus)
[19] Goswami, S., Chakraborty, S., Chowdhury, R., Rabczuk, T.: Threshold shift method for reliability-based design optimization, 2019, Structural and Multidisciplinary Optimization, 60 (5), pp. 2053-2072, DOI: 10.1007/s00158-019-02310-x (Scopus)
[20] Zhou, S., Zhuang, X., Rabczuk, T.: Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation, 2019, Computer Methods in Applied Mechanics and Engineering, 355, pp. 729-752, DOI: 10.1016/j.cma.2019.06.021 (Scopus)
[21] Izadifar, M., Thissen, P., Abadi, R., Jam, A.N., Gohari, S., Burvill, C., Rabczuk, T.: Fracture toughness of various percentage of doping of boron atoms on the mechanical properties of polycrystalline graphene: A molecular dynamics study, 2019, Physica E: Low-Dimensional Systems and Nanostructures, 114, art. no. 113614, DOI: 10.1016/j.physe.2019.113614 (Scopus)
[22] Arefi, M., Mohammadi, M., Rabczuk, T.: Effect of characteristics and distribution of porosity on electro-elastic analysis of laminated vessels with piezoelectric face-sheets based on higher-order modeling, 2019, Composite Structures, 225, art. no. 111085, DOI: 10.1016/j.compstruct.2019.111085 (Scopus)
[23] Zahedi, R.K., Shirazi, A.H.N., Alimouri, P., Alajlan, N., Rabczuk, T.: Mechanical properties of graphene-like BC3; a molecular dynamics study, 2019, Computational Materials Science, 168, pp. 1-10, DOI: 10.1016/j.commatsci.2019.05.053 (Scopus)
[24] Fang, J., Wu, C., Rabczuk, T., Wu, C., Ma, C., Sun, G., Li, Q.: Phase field fracture in elasto-plastic solids: Abaqus implementation and case studies, 2019, Theoretical and Applied Fracture Mechanics, 103, art. no. 102252, DOI: 10.1016/j.tafmec.2019.102252 (Scopus)
[25] Areias, P., Pires, M., Bac, N.V., Rabczuk, T.: An objective and path-independent 3D finite-strain beam with least-squares assumed-strain formulation, 2019, Computational Mechanics, 64 (4), pp. 1115-1131, DOI: 10.1007/s00466-019-01696-1 (Scopus)
[26] Ebrahimi, F., Nouraei, M., Dabbagh, A., Rabczuk, T.: Thermal buckling analysis of embedded graphene-oxide powder-reinforced nanocomposite plates, 2019, Advances in Nano Research, 7 (5), pp. 293-310, DOI: 10.12989/anr.2019.7.5.293 (Scopus)
[27] Rabczuk, T.: Special issue "computational methods for fracture", 2019, Applied Sciences (Switzerland), 9 (17), art. no. 3455, DOI: 10.3390/app9173455 (Scopus)
[28] Goswami, S., Anitescu, C., Rabczuk, T.: Adaptive phase field analysis with dual hierarchical meshes for brittle fracture, 2019, Engineering Fracture Mechanics, 218, art. no. 106608, DOI: 10.1016/j.engfracmech.2019.106608 (Scopus)
[29] Aria, A.I., Rabczuk, T., Friswell, M.I.: A finite element model for the thermo-elastic analysis of functionally graded porous nanobeams, 2019, European Journal of Mechanics, A/Solids, 77, art. no. 103767, DOI: 10.1016/j.euromechsol.2019.04.002 (Scopus)
[30] Arefi, M., Mohammad-Rezaei Bidgoli, E., Rabczuk, T.: Effect of various characteristics of graphene nanoplatelets on thermal buckling behavior of FGRC micro plate based on MCST, 2019, European Journal of Mechanics, A/Solids, 77, art. no. 103802, DOI: 10.1016/j.euromechsol.2019.103802 (Scopus)
[31] Arefi, M., Mohammad-Rezaei Bidgoli, E., Rabczuk, T.: Thermo-mechanical buckling behavior of FG GNP reinforced micro plate based on MSGT, 2019, Thin-Walled Structures, 142, pp. 444-459, DOI: 10.1016/j.tws.2019.04.054 (Scopus)
[32] Salavati, M., Alajlan, N., Rabczuk, T.: Super-stretchability in two-dimensional RuCl3 and RuBr3 confirmed by first-principles simulations, 2019, Physica E: Low-Dimensional Systems and Nanostructures, 113, pp. 79-85, DOI: 10.1016/j.physe.2019.05.011 (Scopus)
[33] Hamdia, K.M., Marino, M., Zhuang, X., Wriggers, P., Rabczuk, T.: Sensitivity analysis for the mechanics of tendons and ligaments: Investigation on the effects of collagen structural properties via a multiscale modeling approach, 2019, International Journal for Numerical Methods in Biomedical Engineering, 35 (8), art. no. e3209, DOI: 10.1002/cnm.3209 (Scopus)
[34] Mortazavi, B., Shahrokhi, M., Raeisi, M., Zhuang, X., Pereira, L.F.C., Rabczuk, T.: Outstanding strength, optical characteristics and thermal conductivity of graphene-like BC3 and BC6N semiconductors, 2019, Carbon, 149, pp. 733-742, DOI: 10.1016/j.carbon.2019.04.084 (Scopus)
[35] Shahnooshi, E., Jamshidian, M., Jafari, M., Ziaei-Rad, S., Rabczuk, T.: Phase field modeling of stressed grain growth: Effect of inclination and misorientation dependence of grain boundary energy, 2019, Journal of Crystal Growth, 518, pp. 18-29, DOI: 10.1016/j.jcrysgro.2019.04.015 (Scopus)
[36] Shafei, E., Faroughi, S., Rabczuk, T.: Isogeometric HSDT approach for dynamic stability analysis of general anisotropic composite plates, 2019, Composite Structures, 220, pp. 926-939, DOI: 10.1016/j.compstruct.2019.04.054 (Scopus)
[37] Valizadeh, N., Rabczuk, T.: Isogeometric analysis for phase-field models of geometric PDEs and high-order PDEs on stationary and evolving surfaces, 2019, Computer Methods in Applied Mechanics and Engineering, 351, pp. 599-642, DOI: 10.1016/j.cma.2019.03.043 (Scopus)
[38] Arefi, M., Rabczuk, T.: A nonlocal higher order shear deformation theory for electro-elastic analysis of a piezoelectric doubly curved nano shell, 2019, Composites Part B: Engineering, 168, pp. 496-510, DOI: 10.1016/j.compositesb.2019.03.065 (Scopus)
[39] Arefi, M., Kiani, M., Rabczuk, T.: Application of nonlocal strain gradient theory to size dependent bending analysis of a sandwich porous nanoplate integrated with piezomagnetic face-sheets, 2019, Composites Part B: Engineering, 168, pp. 320-333, DOI: 10.1016/j.compositesb.2019.02.057 (Scopus)
[40] Vu-Bac, N., Duong, T.X., Lahmer, T., Areias, P., Sauer, R.A., Park, H.S., Rabczuk, T.: A NURBS-based inverse analysis of thermal expansion induced morphing of thin shells, 2019, Computer Methods in Applied Mechanics and Engineering, 350, pp. 480-510, DOI: 10.1016/j.cma.2019.03.011 (Scopus)
[41] Zhou, S., Zhuang, X., Rabczuk, T.: Phase-field modeling of fluid-driven dynamic cracking in porous media, 2019, Computer Methods in Applied Mechanics and Engineering, 350, pp. 169-198, DOI: 10.1016/j.cma.2019.03.001 (Scopus)
[42] Fu, Z.-J., Tang, Z.-C., Zhao, H.-T., Li, P.-W., Rabczuk, T.: Numerical solutions of the coupled unsteady nonlinear convection-diffusion equations based on generalized finite difference method, 2019, European Physical Journal Plus, 134 (6), art. no. 272, DOI: 10.1140/epjp/i2019-12786-7 (Scopus)
[43] Ren, H.L., Zhuang, X.Y., Anitescu, C., Rabczuk, T.: An explicit phase field method for brittle dynamic fracture, 2019, Computers and Structures, 217, pp. 45-56, DOI: 10.1016/j.compstruc.2019.03.005 (Scopus)
[44] Mortazavi, B., Madjet, M.E., Shahrokhi, M., Ahzi, S., Zhuang, X., Rabczuk, T.: Nanoporous graphene: A 2D semiconductor with anisotropic mechanical, optical and thermal conduction properties, 2019, Carbon, 147, pp. 377-384, DOI: 10.1016/j.carbon.2019.03.018 (Scopus)
[45] Yousefi, H., Rabczuk, T.: Multiresolution-based adaptive central high resolution schemes for modeling of nonlinear propagating fronts, 2019, Engineering Analysis with Boundary Elements, 103, pp. 172-195, DOI: 10.1016/j.enganabound.2019.03.002 (Scopus)
[46] Hussain, T., Mortazavi, B., Bae, H., Rabczuk, T., Lee, H., Karton, A.: Enhancement in hydrogen storage capacities of light metal functionalized Boron–Graphdiyne nanosheets, 2019, Carbon, 147, pp. 199-205, DOI: 10.1016/j.carbon.2019.02.085 (Scopus)
[47] Mortazavi, B., Shahrokhi, M., Hussain, T., Zhuang, X., Rabczuk, T.: Theoretical realization of two-dimensional M 3 (C 6 X 6 ) 2 (M = Co, Cr, Cu, Fe, Mn, Ni, Pd, Rh and X = O, S, Se) metal–organic frameworks, 2019 Applied Materials Today, 15, pp. 405-415, DOI: 10.1016/j.apmt.2019.03.002 (Scopus)
[48] Oucif, C., Voyiadjis, G.Z., Kattan, P.I., Rabczuk, T.: Investigation of the super healing theory in continuum damage and healing mechanics, 2019, International Journal of Damage Mechanics, 28 (6), pp. 896-917, DOI: 10.1177/1056789518799822 (Scopus)
[49] Xu, J., Ling, C., Xu, G., Ji, Z., Rabczuk, T.: Spline bas-relief modeling from sketches by isogeometric analysis approach, 2019, Graphical Models, 103, art. no. 101025, DOI: 10.1016/j.gmod.2019.101025 (Scopus)
[50] Lv, J.-H., Jiao, Y.-Y., Feng, X.-T., Wriggers, P., Zhuang, X.-Y., Rabczuk, T.: A series of Duffy-distance transformation for integrating 2D and 3D vertex singularities, 2019, International Journal for Numerical Methods in Engineering, 118 (1), pp. 38-60, DOI: 10.1002/nme.6016 (Scopus)
[51] Mahata, A., Jiang, J.-W., Mahapatra, D.R., Rabczuk, T.: Effect of intrinsic structural defects on mechanical properties of single layer MoS 2, 2019, Nano-Structures and Nano-Objects, 18, art. no. 100247, DOI: 10.1016/j.nanoso.2019.01.006 (Scopus)
[52] Salavati, M., Rabczuk, T.: Application of highly stretchable and conductive two-dimensional 1T VS 2 and VSe 2 as anode materials for Li-, Na- and Ca-ion storage, 2019, Computational Materials Science, 160, pp. 360-367, DOI: 10.1016/j.commatsci.2019.01.018 (Scopus)
[53] Nanthakumar, S.S., Zhuang, X., Park, H.S., Nguyen, C., Chen, Y., Rabczuk, T.: Inverse design of quantum spin hall-based phononic topological insulators, 2019, Journal of the Mechanics and Physics of Solids, 125, pp. 550-571, DOI: 10.1016/j.jmps.2019.01.009 (Scopus)
[54] Do, H.V., Lahmer, T., Zhuang, X., Alajlan, N., Nguyen-Xuan, H., Rabczuk, T.: An isogeometric analysis to identify the full flexoelectric complex material properties based on electrical impedance curve, 2019, Computers and Structures, 214, pp. 1-14, DOI: 10.1016/j.compstruc.2018.10.019 (Scopus)
[55] Anitescu, C., Nguyen, C., Rabczuk, T., Zhuang, X.: Isogeometric analysis for explicit elastodynamics using a dual-basis diagonal mass formulation, 2019, Computer Methods in Applied Mechanics and Engineering, 346, pp. 574-591, DOI: 10.1016/j.cma.2018.12.002 (Scopus)
[56] Chakraborty, S., Goswami, S., Rabczuk, T.: A surrogate assisted adaptive framework for robust topology optimization, 2019, Computer Methods in Applied Mechanics and Engineering, 346, pp. 63-84, DOI: 10.1016/j.cma.2018.11.030 (Scopus)
[57] Amiri, F., Ziaei-Rad, S., Valizadeh, N., Rabczuk, T.: On the use of local maximum entropy approximants for Cahn–Hilliard phase-field models in 2D domains and on surfaces, 2019, Computer Methods in Applied Mechanics and Engineering, 346, pp. 1-24, DOI: 10.1016/j.cma.2018.11.023 (Scopus)
[58] Nguyen, B.H., Zhuang, X., Rabczuk, T.: NURBS-based formulation for nonlinear electro-gradient elasticity in semiconductors, 2019, Computer Methods in Applied Mechanics and Engineering, 346, pp. 1074-1095, DOI: 10.1016/j.cma.2018.08.026 (Scopus)
[59] Dineva, A., Mosavi, A., Ardabili, S., Vajda, I., Shamshirband, S., Rabczuk, T., Chau, K.-W.: Review of soft computing models in design and control of rotating electrical machines, 2019, Energies, 12 (6), art. no. 1049, DOI: 10.3390/en12061049 (Scopus)
[60] Aria, A.I., Friswell, M.I., Rabczuk, T.: Thermal vibration analysis of cracked nanobeams embedded in an elastic matrix using finite element analysis, 2019, Composite Structures, 212, pp. 118-128, DOI: 10.1016/j.compstruct.2019.01.040 (Scopus)
[61] Nguyen, B.H., Zhuang, X., Park, H.S., Rabczuk, T.: Tunable topological bandgaps and frequencies in a pre-stressed soft phononic crystal, 2019, Journal of Applied Physics, 125 (9), art. no. 095106, DOI: 10.1063/1.5066088 (Scopus)
[62] Ebrahimi, F., Dabbagh, A., Rabczuk, T., Tornabene, F.: Analysis of propagation characteristics of elastic waves in heterogeneous nanobeams employing a new two-step porosity-dependent homogenization scheme, 2019, Advances in Nano Research, 7 (2), pp. 135-143, DOI: 10.12989/anr.2019.7.2.135 (Scopus)
[63] Arefi, M., Pourjamshidian, M., Ghorbanpour Arani, A., Rabczuk, T.: Influence of flexoelectric, small-scale, surface and residual stress on the nonlinear vibration of sigmoid, exponential and power-law FG Timoshenko nano-beams, 2019, Journal of Low Frequency Noise Vibration and Active Control, 38 (1), pp. 122-142, DOI: 10.1177/1461348418815410 (Scopus)
[64] Jia, Y., Anitescu, C., Zhang, Y.J., Rabczuk, T.: An adaptive isogeometric analysis collocation method with a recovery-based error estimator, 2019, Computer Methods in Applied Mechanics and Engineering, 345, pp. 52-74, DOI: 10.1016/j.cma.2018.10.039 (Scopus)
[65] Rostami, A., Hemmati-Sarapardeh, A., Karkevandi-Talkhooncheh, A., Husein, M.M., Shamshirband, S., Rabczuk, T.: Modeling heat capacity of ionic liquids using group method of data handling: A hybrid and structure-based approach, 2019, International Journal of Heat and Mass Transfer, 129, pp. 7-17, DOI: 10.1016/j.ijheatmasstransfer.2018.09.057 (Scopus)
[66] Makaremi, M., Mortazavi, B., Rabczuk, T., Ozin, G.A., Singh, C.V.: Theoretical Investigation: 2D N-Graphdiyne Nanosheets as Promising Anode Materials for Li/Na Rechargeable Storage Devices, 2019, ACS Applied Nano Materials, 2 (1), pp. 127-135, DOI: 10.1021/acsanm.8b01751 (Scopus)
[67] Chen, Y., Ding, D., Zhu, C., Zhao, J., Rabczuk, T.: Size- and edge-effect cohesive energy and shear strength between graphene, carbon nanotubes and nanofibers: Continuum modeling and molecular dynamics simulations, 2019, Composite Structures, 208, pp. 150-167, DOI: 10.1016/j.compstruct.2018.10.021 (Scopus)
[68] Rabczuk, T., Song, J.-H., Zhuang, X., Anitescu, C.: Extended finite element and meshfree methods, 2019, Extended Finite Element and Meshfree Methods, pp. 1-617, DOI: 10.1016/C2017-0-00659-6 (Scopus)
[69] Jenabidehkordi, A., Rabczuk, T.: The multi-horizon peridynamics, 2019, CMES - Computer Modeling in Engineering and Sciences, 121 (2), pp. 493-500, DOI: 10.32604/cmes.2019.07942 (Scopus)
[70] Ren, H., Zhuang, X., Rabczuk, T.: A dual-support smoothed particle hydrodynamics for weakly compressible fluid inspired by the dual-horizon peridynamics, 2019, CMES - Computer Modeling in Engineering and Sciences, 121 (2), pp. 353-383, DOI: 10.32604/cmes.2019.05146 (Scopus)
[71] Bisheh, H., Wu, N., Rabczuk, T.: Free vibration analysis of smart laminated carbon nanotube-reinforced composite cylindrical shells with various boundary conditions in hygrothermal environments, 2019, Thin-Walled Structures, art. no. 106500, DOI: 10.1016/j.tws.2019.106500 (Scopus)
[72] Shamshirband, S., Rabczuk, T., Chau, K.-W.: A Survey of Deep Learning Techniques: Application in Wind and Solar Energy Resources, 2019, IEEE Access, 7, art. no. 8894383, pp. 164650-164666, DOI: 10.1109/ACCESS.2019.2951750 (Scopus)
[73] Nguyen, D.L.H., Thanh Do, D.T., Lee, J., Rabczuk, T., Nguyen-Xuan, H.: Forecasting damage mechanics by deep learning, 2019, Computers, Materials and Continua, 61 (3), pp. 951-977, DOI: 10.32604/cmc.2019.08001 (Scopus)
[74] Xu, J., Sun, N., Shu, L., Rabczuk, T., Xu, G.: An improved integration for trimmed geometries in isogeometric analysis, 2019, Computers, Materials and Continua, 60 (2), pp. 615-632, DOI: 10.32604/cmc.2019.04464 (Scopus)
[75] Hessam, S., Vahdat, S., Asl, I.M., Kazemipoor, M., Aghaei, A., Shamshirband, S., Rabczuk, T.: Parkinson’s disease detection using biogeography-based optimization, 2019, Computers, Materials and Continua, 61 (1), pp. 11-26, DOI: 10.32604/cmc.2019.06472 (Scopus)
[76] Karimi, M., Rabczuk, T., Luthfi, M., Pourabbas, B., Esrafilian, A.: An evaluation of the efficiency of endpoint control on the correction of scoliotic curve with brace. A case study, 2019, Acta of Bioengineering and Biomechanics, 21 (2), pp. 3-10, DOI: 10.5277/ABB-01282-2018-05 (Scopus)
[77] Mortazavi, B., Shahrokhi, M., Shapeev, A.V., Rabczuk, T., Zhuang, X.: Prediction of C7N6 and C9N4: Stable and strong porous carbon-nitride nanosheets with attractive electronic and optical properties, 2019, Journal of Materials Chemistry C, 7 (35), pp. 10908-10917, DOI: 10.1039/c9tc03513c (Scopus)
[78] Guo, H., Zhuang, X., Rabczuk, T.: A deep collocation method for the bending analysis of Kirchhoff plate, 2019, Computers, Materials and Continua, 59 (2), pp. 433-456, DOI: 10.32604/cmc.2019.06660 (Scopus)
[79] Hamdia, K.M., Rabczuk, T.: Key parameters for fracture toughness of particle/polymer nanocomposites; sensitivity analysis via XFEM modeling approach, 2019, Lecture Notes in Mechanical Engineering, pp. 41-51, DOI: 10.1007/978-981-13-0411-8_4 (Scopus)
[80] Budarapu, P.R., Zhuang, X., Rabczuk, T., Bordas, S.P.A.: Multiscale modeling of material failure: Theory and computational methods, 2019, Advances in Applied Mechanics, 52, pp. 1-103, DOI: 10.1016/bs.aams.2019.04.002 (Scopus)
[81] Mosavi, A., Salimi, M., Ardabili, S.F., Rabczuk, T., Shamshirband, S., Varkonyi-Koczy, A.R.: State of the art of machine learning models in energy systems, a systematic review, 2019) Energies, 12 (7), art. no. 1301, DOI: 10.3390/en12071301 (Scopus)
[82] Anitescu, C., Atroshchenko, E., Alajlan, N., Rabczuk, T.: Artificial neural network methods for the solution of second order boundary value problems, 2019, Computers, Materials and Continua, 59 (1), pp. 345-359, DOI: 10.32604/cmc.2019.06641 (Scopus)
[83] Rabczuk, T., Ren, H., Zhuang, X.: A nonlocal operator method for partial differential equations with application to electromagnetic waveguide problem, 2019, Computers, Materials and Continua, 59 (1), pp. 31-55, DOI: 10.32604/cmc.2019.04567 (Scopus)
[84] Hamdia, K.M., Ghasemi, H., Zhuang, X., Alajlan, N., Rabczuk, T.: Computational machine learning representation for the flexoelectricity effect in truncated pyramid structures, 2019, Computers, Materials and Continua, 59 (1), pp. 79-87, DOI: 10.32604/cmc.2019.05882 (Scopus)
[85] Jalili, S., Hosseinzadeh, Y., Rabczuk, T.: Simultaneous size and shape optimization of dome-shaped structures using improved cultural algorithm, 2019, Studies in Computational Intelligence, 828, pp. 93-120, DOI: 10.1007/978-981-13-6569-0_5 (Scopus)
[86] Yousefi, H., Mohammadi, S., Rabczuk, T.: Multiscale Polynomial-Based High-Order Central High Resolution Schemes, 2019, Journal of Scientific Computing, DOI: 10.1007/s10915-019-00949-8 (Scopus)
[87] Mortazavi, B., Shahrokhi, M., Madjet, M.E., Hussain, T., Zhuang, X., Rabczuk, T.: N-, B-, P-, Al-, As-, and Ga-graphdiyne/graphyne lattices: First-principles investigation of mechanical, optical and electronic properties, 2019, Journal of Materials Chemistry C, 7 (10), pp. 3025-3036, DOI: 10.1039/c9tc00082h (Scopus)
[88] Karimi, M.T., Rabczuk, T., Kavyani, M., Macgarry, A.: Evaluation of the efficacy of part-time versus full-time brace wear in subjects with adolescent idiopathic scoliosis (AIS): A review of literature, 2019, Current Orthopaedic Practice, 30 (1), pp. 61-68, DOI: 10.1097/BCO.0000000000000700 (Scopus)
[89] Yoon, Y.-C., Schaefferkoetter, P., Rabczuk, T., Song, J.-H.: New strong formulation for material nonlinear problems based on the particle difference method, 2019, Engineering Analysis with Boundary Elements, 98, pp. 310-327, DOI: 10.1016/j.enganabound.2018.10.015 (Scopus)
[90] Mortazavi, B., Shahrokhi, M., Madjet, M.E., Makaremi, M., Ahzi, S., Rabczuk, T.: N-, P-, As-triphenylene-graphdiyne: Strong and stable 2D semiconductors with outstanding capacities as anodes for Li-ion batteries, 2019, Carbon, 141, pp. 291-303, DOI: 10.1016/j.carbon.2018.09.070 (Scopus)
[91] Hamdia, K.M., Msekh, M.A., Silani, M., Thai, T.Q., Budarapu, P.R., Rabczuk, T.: Assessment of computational fracture models using Bayesian method, 2019, Engineering Fracture Mechanics, 205, pp. 387-398, DOI: 10.1016/j.engfracmech.2018.09.019 (Scopus)
[92] Areias, P., Lopes, J.C., Santos, M.P., Rabczuk, T., Reinoso, J.: Finite strain analysis of limestone / basaltic magma interaction and fracture: Low order mixed tetrahedron and remeshing, 2019, European Journal of Mechanics, A/Solids, 73, pp. 235-247, DOI: 10.1016/j.euromechsol.2018.09.003 (Scopus)
[93] Shojaei, A., Galvanetto, U., Rabczuk, T., Jenabi, A., Zaccariotto, M.: A generalized finite difference method based on the Peridynamic differential operator for the solution of problems in bounded and unbounded domains, 2019, Computer Methods in Applied Mechanics and Engineering, 343, pp. 100-126, DOI: 10.1016/j.cma.2018.08.033 (Scopus)
2018
[1] Areias P., Rabczuk T., Cesar de Sa J., Mota Soares C.A.: Fully-coupled piezo-electric assumed-strain least-squares nonlinear shell , Thin Walled Structures, in press
[2] Thai C.H., Ferreira A.J.M., Rabczuk T., Nguyen-Xuan H.: Size-dependent analysis of FG-CNTRC microplates based on modified strain gradient elasticity theory, European Journal of Mechanics / A Solids, in press
[3] Quoc Thai T., Zhuang X., Rabczuk T.: A large deformation isogeometric approach for flexoelectricity and soft materials, Computer Methods in Applied Mechanics and Engineering, in press
[4] Nguyen-Thai M., , Nguyen-Xuan H., Rabczuk T., Wriggers P., Zhuang X.: A Virtual Element Method for 2D linear elastic fracture analysis, Computer Methods in Applied Mechanics and Engineering, in press
[5] Nguyen Huy B., Zhuang X., Rabczuk T.: Numerical model for the characterization of Maxwell-Wagner relaxation in piezoelectric and flexoelectric composite material, Computers & Structures, in press
[6] Sahmani S., Aghdam M.M., Rabczuk T.: A unified nonlocal strain gradient plate model for nonlinear axial instability of functionally graded porous micro/nano-plates reinforced with graphene platelets, Materials Research Express, in press
[7] Song J.H., Fu Y., Kim T.Y., Yoon Y.C., Michopoulos J.G., Rabczuk T.: Phase field simulations of coupled microstructure solidification problems via the strong form particle difference method, International Journal of Mechanics and Materials in Design, in press
[8] Karimi M., Kavyani M., Rabczuk T.: Evaluation of the efficiency of part time brace wear versus full time in scoliotic subjects, A review of literature, Current Orthopaedic Practice journal, in press
[9] Najafi B., Ardabili S.F., Mosavi A., Shamshirband S., Rabczuk T.: An Intelligent Artificial Neural Network-Response Surface Methodology Method for Accessing the Optimum Biodiesel and Diesel Fuel Blending Conditions in a Diesel Engine from the Viewpoint of Exergy and Energy Analysis, Energies, 2018, 11(4), 860, doi:10.3390/en11040860
[10] Fardad K., Najafi B., Ardabili S.F., Mosavi A., Shamshirband S., Rabczuk T.: Biodegradation of medicinal plants waste in an anaerobic digestion reactor for biogas production, Computers, Materials and Continua, 2018, 55(3), 318-392
[11] Mortazavi B., Makaremi M., Shahrokhi M., Fan Z., Rabczuk T.: N-Graphdiyne two-dimensional materials: Semiconductors with low thermal conductivity and high stretchability, Carbon, 2018, 137, 57-67
[12] Mojahedin A., Jabbari M., Rabczuk T.: Thermoelastic Analysis of Functionally Graded Porous Beam, Journal of Thermal Stress, 2018, 41(8), 937-950
[13] Noori H.R., Jomehzadeh E., Rabczuk T.: Elastic deformation behaviour of free-standing MoS2 films using a continuum approach, Solid State Communications, 2018, 153, 16-27
[14] Oucif C., Voyiadjis G.Z., Rabczuk T.: Modeling of damage-healing and nonlinear self-healing concrete behaviour: Application to coupled and uncoupled self-healing mechanisms, Theoretical and Applied Fracture Mechanics, 2018, 96, 216-230
[15] Mortazavi B., Shahrokhi M., Zhuang X., Rabczuk T.: Boron-graphdiyne: superstretchable semiconductors with low thermal conductivity and ultrahigh capacity for Li, Na and Ca ions storage, Journal of Materials Chemistry A, 2018, 6(23), 11022-11036
[16] Lv J-H., Jiao Y-Y., Wriggers P., Rabczuk T., Feng X-T., Tan F.: Efficient integration of crack singularities in the extended finite element method: Duffy-distance transformation and conformal preconditioning strategy, Computer Methods in Applied Mechanics and Engineering, 2018, 340, 559-576
[17] Chau-Dinh T., Mai-Van C., Rabczuk T., Zi G.: A phantom-node method with arbitrary crack tips for analysis of cracked plates and shells discretized by 4-node quadri-lateral shell elements, Engineering Fracture Mechanics, 2018, 199, 159-178
[18] Hasanian M., van Duin A.C.T., Rabczuk T., Mortazavi B.: Hydrogenation and Defect Formation Control the Strength and Ductility of MoS2 Nanosheets: Reactive Molecular Dynamics Simulation, Extreme Mechanics Letters, 2018, 22, 157-164
[19] Rabczuk T., Kakavand M., Uma R.P., Shirazi A., Makaremi M.: Thermal conductance along hexagonal boron nitride and Graphene grain boundaries, Energies, 2018, 11(6), 1553
[20] Mortazavi B., Rabczuk T.: Boron monochalcogenides; Stable and strong two-dimensional wide band-gap semiconductors, Energies, 2018, 11(6), 1573
[21] Mortazavi B., Rabczuk T.: Anisotropic mechanical properties and strain tuneable band-gap in two-dimensional SiP, SiAs, GeP and GeAs, Physica E: Low-dimensional Systems and Nanostructures, 2018, 103, 273-278
[22] Jam A.N., Izadifir M., Abadi R., Rabczuk T.: Molecular dynamics study on the mechanical properties of carbon doped single-layer polycrystalline boron-nitride nanosheets, Computational Materials Science, 2018, 153, 16-27
[23] Nguyen Huy B., Nanthakumar S., Zhuang X., Jiang X., Wriggers P., Rabczuk T.: Dynamic flexoelectric effect on piezoelectric nanostructures, European Journal of Mechanics / A Solids, 2018, 71, 404-409
[24] Budarapu P.R., Reinoso J., Javvaji B., Paggi M., Rabczuk T.: A three dimensional adaptive multiscale method for crack growth in Silicon, Theoretical and Applied Fracture Mechanics, 2018, 96, 576-603
[25] Zhang C., Wang C., Rabczuk T.: Thermal conductivity of single-layer MoS2: A comparative study between 1H and 1T? phases, Physica E: Low-dimensional Systems and Nanostructures, 2018, 103, 294-299
[26] Kwasi-Effah C.C., Rabczuk T.: Dimensional Analysis and Modelling of Energy Density of Lithium-Ion Battery, Journal of Energy Storage, 2018, 18, 308-315
[27] Mortazavi B., Makaremi M., Pereira L.F., Shahrokhi M., Rabczuk T.: Borophene hydride: a stiff 2D material with high thermal conductivity and attractive optical and electronic properties, Nanoscale, 2018,10, 3759-3768
[28] Oucif C., Voyiadjis G.Z., Kattan P.I., Rabczuk T.: Nonlinear Super Healing and Contribution to the Design of New Strengthening Theory, Journal of Engineering Mechanics, 2018, 144(7): 04018055
[29] Mortazavi B., Berdiyorov G., Shahrokhi M., Rabczuk T.: Mechanical, opto-electronic and transport properties of single-layer Ca2N and Sr2N electrides, Journal of Alloys and Compounds, 2018, 739, 643-652
[30] Naghipoor J., Jafary N., Rabczuk T.: Mathematical and computational modeling of drug release from an ocular iontophoretic drug delivery device, International Journal of Heat and Mass Transfer, 2018, 123, 1035-1049
[31] Bek Y.K., Hamdia K., Rabczuk T., Koenke C.: Micromechanical Model for Polymeric Nano-composites Material Based on SBFEM, Composite Structures, 2018, 194, 516-526
[32] Tan P., Nguyen-Thanh N., Rabczuk T., Zhou K.: Static, dynamic and buckling analysis of FGM shells in 3D based on isogeometric-meshfree coupling approach, Composite Structures, 2018, 198, 35-50
[33] Sahmani S., Rabczuk T., Aghdam M.: Nonlocal strain gradient plate model for nonlinear large-amplitude vibrations of functionally graded porous micro/nano-plates reinforced with GPLs, Composite Structures, 2018, 198, 51-62
[34] Salavati M., Ghasemi H., Rabczuk T.: Electromechanical properties of Boron Nitride Nanotube: Atomistic bond potential and equivalent mechanical energy approach, Computational Materials Science, 2018, 149, 460-465
[35] Zhou S., Zhuang X., Rabczuk T.: Phase field modelling of crack propagation, branching and coalescence in rocks, Theoretical and Applied Fracture Mechanics, 2018, 96, 174-192
[36] Zhou S., Zhuang X., Rabczuk T.: A phase-field modeling approach of fracture propagation in poroelastic media, Engineering Geology, 2018, 240, 189-203
[37] Cai Y., Sun P., Zhu H., Rabczuk T.: A Mixed cover meshless method for elasticity and fracture problems, Theoretical and Applied Fracture Mechanics, 2018, 95, 73-103
[38] Zhou S., Zhuang X., Rabczuk T.: Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies, Advances in Engineering Software, 2018, 122, 31-49
[39] Mauludin L., Zhuang X., Rabczuk T.: Computational modeling of fracture in encapsulation-based self-healing concrete using cohesive elements, Composite Structures, 2018, 196, 63-75
[40] Chan C.L., Anitescu C., Rabczuk T.: Isogeometric analysis with strong multipatch C1-coupling, Computer-Aided Geometric Design, 2018, 62, 294-310
[41] Hamdia K., Zhuang X., Alajlan N., Rabczuk T.: Sensitivity and uncertainty analyses for flexoelectric nanostructures, Computer Methods in Applied Mechanics and Engineering, 2018, 337, 95-109
[42] Ghasemi H., Park H., Alajlan N., Rabczuk T.: A computational framework for design and optimization of flexoelectric materials, International Journal of Computational Methods, 2018, 15(3), 1850097
[43] Izadifir M., Abadi R., Shirazi A., Alajlan N., Rabczuk T.: Nanopores generation in boron and nitrogen doped polycrystalline graphene nanosheets using silicon and diamond clusters: A molecular dynamics study, Physica E: Low-dimensional Systems and Nanostructures, 2018, 99, 24-36
[44] Pan K., Rabczuk T., Xu G., Chen C.: Isogeometric Approximation of Minimal Surfaces on the Basis of Extended Catmull-Clark Subdivision, Computer Methods in Applied Mechanics and Engineering, 2018, 337, 128-149
[45] Mortazavi B., Berdiyorov G.R., Makaremi M., Rabczuk T.: Mechanical responses of two-dimensional MoTe2; pristine 2H, 1T and 1T’ and 1T’/2H heterostructure, Extreme Mechanics Letters, 2018, 20, 65-72
[46] Abadi R., Izadifir M., Jam A.N., Rabczuk T.: Fabrication of nanopores in poly-crystalline boron-nitride nanosheet by using Si, SiC and diamond clusters bombardment, Computational Materials Science, 2018, 145, 280-290
[47] Shirazi A., Abadi R., Izadifir M., Alajlan N., Rabczuk T.: Mechanical responses of pristine and defective C3N nanosheets studied by molecular dynamics simulations, Computational Materials Science, 2018, 147, 316-321
[48] Msekh M.A., Nguyen-Cuong H., Zi G., Areias P., Zhuang X., Rabczuk T.: Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model, Engineering Fracture Mechanics, 2018, 188, 287-299
[49] Areias P., Reinoso J., Camanho P.P., Cesar de Sa J., Rabczuk T.: Effectiv 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation, Engineering Fracture Mechanics, 2018, 189, 339-360
[50] Areias P., Jorge N., Cesar de Sa J., Rabczuk T., Reinoso J.: General constitutive updating for finite strain formulations based on assumed strains and the Jacobian, Finite Elements in Analysis and Design, 2018, 143, 32-45
[51] Vu-Bac N., Duong T.X., Lahmer T., Zhuang X., Sauer R.A., Park H.S., Rabczuk T.: A NURBS-based Inverse Analysis for Reconstruction of Nonlinear Deformations in Thin Shell Structures, Computer Methods in Applied Mechanics and Engineering, 2018, 331, 427-455
[52] Ghasemi H., Park H.S., Rabczuk T.: Multi-material level set-based topology optimization of flexoelectric composites, Computer Methods in Applied Mechanics and Engineering, 2018, 332, 47-62
[53] Karimi M.T., Rabczuk T.: Scoliosis conservative treatment: A review of literature, Journal of Craniovertebral Junction and Spine, 2018, 9(1), 3-8
[54] Sahmani S., Rabczuk T., Aghdam M.: Nonlinear bending of functionally grade porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory, Composite Structures, 2018, 186, 68-78
[55] Anitescu C., Hossain N., Rabczuk T.: Recovery-based error estimation and adaptivity using high-order splines over hierarchical T-meshes, Computer Methods in Applied Mechanics and Engineering, 2018, 328(1), 638-662
[56] Xu G., Li M., Mourrain B., Rabczuk T., Xu J., Bordas S.P.A.: Constructing IGA-suitable planar parameterization from complex CAD boundary by domain partition and global/local optimization, Computer Methods in Applied Mechanics and Engineering, 2018, 328(1), 175-200
[57] Badnava H., Msekh M.A., Etamadi E., Rabczuk T.: An h-adaptive thermo-mechanical phase field model for fracture, Finite Elements in Analysis & Design, 2018, 138, 31-47
[58] Akmar A.B.I., Kramer O., Rabczuk T.: Probabilistic multi-scale optimization of hybrid laminated composites, Composite Structures, 2018, 184, 1111-1125
[59] Zhang C., Zhao J., Rabczuk T.: The interface strength and delamination of fiber-reinforced composites using a continuum modeling approach, Composites Part B: Engineering, 2018, 137, 225-234
[60] Jamshidian M., Dehghani A., Talaei M.S., Rabczuk T.: Size dependent surface energy of nanoplates: molecular dynamics and nanoscale continuum theory correlations, Physics Letters A, 2018, 382(2-3), 61-65
[61] Pawar A., Zhang Y.J., Anitescu C., Jia Y., Rabczuk T.: DTHB3D Reg: Dynamic Truncated Hierarchical B-Spline Based 3D Nonrigid Image Registration, Communications in Computational Physics, 2018, 23(3), 877-898
[62] Areias P., Rabczuk T., Vu-Bac N.: A multisurface constitutive model for highly cross-linked polymers with yield data obtained from molecular dynamics simulations, International Journal of Mechanics & Materials in Design, 2018, 14(1), 21-36
[63] Chien Thai Hoang, Ferreira A., Rabczuk T., Nguyen-Xuan H.: A naturally stabilized nodal integration meshfree formulation for carbon nanotube-reinforced composite plate analysis, Engineering Analysis with Boundary Elements, 2018, 92, 136-155
2017
[1] Delgoshaei A., Rabczuk T., Ali A., Ariffin M.K.A.: An Applicable Method for Modifying Over-allocated Multi-mode Resource Constraint Schedules in the Presence of Preemptive Resources, Annals of Operations Research, 2017, 259(1-2), 85-117
[2] Naghipoor J., Rabczuk T.: A mechanistic model for drug release from PLGA-based drug eluting stent: A computational study, Computers in Biology and Medicine, 2017, 90(1), 15-22
[3] Badawy M.F., Msekh M.A., Khader K.H., Steiner M.K., Lahmer T., Rabczuk T.: Hybrid nonlinear surrogate models for fracture behavior of polymeric nanocomposites using phase field model, Probabilistic Engineering Mechanics, 2017, 50, 64-75
[4] Mortazavi B., Lherbier A., Fan Z, Harju A. Rabczuk T., Charlier J.C.: Thermal and electronic transport characteristics of highly stretchable graphene kirigami, Nanoscale, 2017, 9, 16329 – 16341
[5] Mortazavi B., Shahrokhi M., Makaremi M., Rabczuk T.: Theoretical realization of Mo2P; A novel stable 2D material with superionic conductivity and attractive optical properties, Applied Materials Today, 2017, 9C, 292-299
[6] Budarapu P.R., Rabczuk T.: Multiscale methods for fracture: A review, Journal of the Indian Institute of Science, 2017, 97(3), 339-376
[7] Mortazavi B., Shahrokhi M., Rabczuk T., Pereira L.F.C.: Electronic, optical and thermal properties of highly stretchable 2D carbon Ene-yne graphyne, Carbon, 2017, 123C, 344-353
[8] Ren H., Zhuang X., Rabczuk T.: Implementation of GTN model in dual-horizon peridynamics, Procedia Engineering, 2017, 197, 224-232
[9] Nguyen-Vinh P., Lian H., Rabczuk T., Bordas S.: Modeling hydraulic fractures in porous media using flow cohesive interface elements, Engineering Geology, 2017, 225, 68-82
[10] Izadifir M., Abadi R., Jam A.N., Rabczuk T.: Investigation into the effect of doping of boron and nitrogen atoms in the mechanical properties of single-layer poly-crystalline graphene, Computational Materials Science, 2017, 138, 435-447
[11] Rabczuk T., Ren H.: A peridynamics formulation for quasi-static fracture and contact in rock, Engineering Geology, 2017, 225C, 42-48
[12] Wang C., Zhang C., Jiang J.W., Rabczuk T.: The Effects of Vacancy and Oxidation on Black Phosphorus Nanoresonators, Nanotechnology, 2017, 28(13), Articlenumber 135202
[13] Abadi R., Uma R.P., Izadifar M., Rabczuk T.: Investigation of crack propagation and existing notch on the mechanical response of polycrystalline hexagonal boron-nitride nanosheets, Computational Materials Science, 2017, 131, 86-99
[14] Mortazavi B., Rahaman O., Azi S., Rabczuk T.: Flat borophene films as anode materials for Mg, Na or Li-ion batteries with ultra high capacities: A first-principles study, Applied Materials Today, 2017, 8, 60-67
[15] Mortazavi B., Le M.Q., Rabczuk T., Pereira L.: Anomalous strain effect on the thermal conductivity of borophene: a reactive molecular dynamics study, Journal: Physica E: Low-dimensional Systems and Nanostructures, 2017, 93, 202-207
[16] Mohebbi F., Sellier M., Rabczuk T.: Inverse problem of simultaneously estimating the thermal conductivity and boundary shape, International Journal for Computational Methods in Engineering Science and Mechanics, 2017, 18(2-3), 166-181
[17] Hamdia K., Zhuang X., Silani M., He P., Rabczuk T.: Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions, International Journal of Fracture, 2017, 206(2), 215-227
[18] Zhang C., Nanthakumar S.S., Lahmer T., Rabczuk T.: Multiple Cracks Identification For Piezoelectric Structures, International Journal of Fracture, 2017, 206(2), 151-169
[19] Nguyen B.H., Tran H.D., Anitescu C., Zhuang X., Rabczuk T.: Isogeometric Symmetric Galerkin Boundary Element Method for Three-dimensional Elasticity Problems, Computer Methods in Applied Mechanics and Engineering, 2017, 323, 132-150
[20] Nanthakumar S., Zhuang X., Park H., Rabczuk T.: Topology Optimization o Flexoelectric Structures, Journal on the Mechanics and Phyiscs of Solids, 2017, 105, 217-234
[21] Mortazavi B., Yang H., Mohebbi F., Cuniberti G., Rabczuk T.: Graphene or h-BN/paraffin composite structures for the thermal management of Li-ion batteries: A multiscale investigation, Applied Energy, 2017, 202, 323-334
[22] Areias P., Rabczuk T.: Steiner-point free edge cutting of tetrahedral meshes with applications in fracture, Finite Elements in Analysis & Design, 2017, 132, 27-41
[23] Chan C.L., Anitescu C., Zhang J., Rabczuk T.: An image registration method using B-spline composition and level sets, Communications in Computational Physics, 2017, 21(2), 600-622. doi:10.4208/cicp.OA-2016-0042
[24] Barrios Vargas J.E., Mortazavi B., Cummings A.W., Martinez-Gordillo R., Pruneda M., Colombo L., Rabczuk T., Roche S.: Electrical and thermal transport in coplanar polycrystalline graphene-hBN heterostructures, Nano Letters, 2017 17(3),1660-1664
[25] Mortazavi B., Quey R., Moulin N., van Duin A., Ostadhossein A., Villani A., Rabczuk T.: Strong thermal transport along polycrystalline transition metal dichalcogenides revealed by multiscale modelling for MoS2, Applied Materials Today, 2017,7, 67-76
[26] Mortazavi B., Shahrokhi M., Makaremi M., Rabczuk T.: Anisotropic mechanical and optical response and negative Poisson?s ratio in Mo2C nanomembranes revealed by first-principles simulations, Nanotechnology, 2017, 28(11):115705
[27] Rahaman O., Mortazavi B., Dianat A., Cuniberti G., Rabczuk T.: Metamorphosis in Carbon Network: From Penta-Graphene to Biphenylene under Uniaxial Tension, Chemistry of Flat Materials, 2017, 1, 65-73
[28] Zhang C., Wang C., Rabczuk T., Wei N.: Thermal conductivity of graphene nanoribbons under shear deformation: A molecular dynamics simulation, Scientific Reports, 2017, 7, Article number: 41398
[29] Mortazavi B., Rabczuk T.: Multiscale modelling of heat conduction in all-MoS2 single-layer heterostructures, RSC advances, 2107, 7, 11135-11141
[30] Ghorashi S.Sh., Rabczuk T.: A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials, Engineering Geology, 2017, 225C, 103-113
[31] Mohebbi F., Sellier M., Rabczuk T.: Estimation of linearly temperature-dependent thermal conductivity using an inverse analysis, International Journal of Thermal Sciences, 2017, 117, 68-76
[32] Ren H., Zhuang X., Rabczuk T.: Dual-horizon peridynamics: A stable solution to varying horizons, Computer Methods in Applied Mechanics and Engineering, 2017, 318, 762-782
[33] Nguyen-Thanh N., Zhou K., Zhuang X., Areias P., Nguyen-Xuan H., Bazilevs Y., Rabczuk T.: Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling, Computer Methods in Applied Mechanics and Engineering, 2017, 316, 1157-1178
[34] Budarapu P.R., Javvaji B., Sutrakar V.K., Mahapatra D.R., Paggi M., Zi G., Rabczuk T.: Lattice orientation and crack size effect on the mechanical properties of Graphene, International Journal for Fracture, 2017, 203, 1-2, 81-98
[35] Areias P., Rodrigues A., Carcao J., Rabczuk T., Carvalho A.: Analysis of experimentally assessed EVA foams with mixed solid-shell elements capable of very large strains, Finite Elements in Analysis and Design, 2017, 128, 19-31
[36] Ghorashi S.Sh., Rabczuk T.: Goal-oriented error estimation and mesh adaptivity in 3d elasto-plastic problems, International Journal of Fracture, 2017, 203(1), 3-19 (Scopus)
[37] Dai Z., Ren H., Zhuang X., Rabczuk T.: Dual-support Smoothed particle hydrodynamics, International Journal of Computational Methods, 2017, 14(4), Article number 1750039
[38] Mortazavi B., Rahaman O., Makaremi M., Dianat A., Cuniberti G., Rabczuk T.: First-principles investigation of mechanical properties of silicene, germanene and stanene, Physica E: Low-dimensional Systems and Nanostructures, 2017, 87, 228-232
[39] Nguyen-Vinh P., Nguyen-Chi T., Rabczuk T., Natarajan S.: On a family of Convected Particle Domain Interpolations in the Material Point Method, Finite Elements in Analysis and Design, 2017, 126, 50-64
[40] Ferreira J.A., Goncalves L., Naghipoor J., de Oliveira P., Rabczuk T.: The influence of atherosclerotic plaques on the pharmacokinetics of a drug eluted from bioabsorbable stents, Mathematical Biosciences, 2017, 283, 71-83
[41] Ghasemi H., Park H.S., Rabczuk T.: A level-set based IGA formulation for topology optimization of flexoelectric materials, Computer Methods in Applied Mechanics and Engineering, 2017, 313, 239-258
[42] Areias P., Rabczuk T.:, Reinoso J., Cesar de Sa J.: Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility, European Journal of Mechanics / A Solids, 2017, 61, 293-314
[43] Chan C.L., Anitescu C., Rabczuk T.: Volumetric parametrization from a level set boundary representation with a hierarchical spline basis, Computer Aided Design, 2017, 82C, 29-41
[44] Nguyen-Xuan H., Nguyen S., Rabczuk T., Hackl K.: A polytree-based adaptive approach to limit analysis of cracked plane-strain structures, Computer Methods in Applied Mechanics and Engineering, 2017, 313, 1006-1039
[45] Rahaman O., Mortazavi B., Dianat A., Cuniberti G., Rabczuk T.: A Structural Insight into Mechanical Strength of Graphene-like Carbon and Carbon Nitride Networks, Nanotechnology, 2017, 28, 055707
2016
[1] Vu-Bac N., Areias P., Rabczuk T.: A Multiscale Multisurface Constitutive Model for The Thermo-Plastic Behavior of Polyethylene, Polymer, 2016, 105, 327-338
[2] Wang C., Zhang C., Jiang J.W., Park H.S., Rabczuk T.: Self-Assembly of Water Molecules Using Graphene Nanoresonators, RSC Advances, 2016, 6, 110466
[3] Areias P., Rabczuk T.:, Cesar de Sa J.: A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement, Computational Mechanics, 2016, 58, 1003-1018
[4] Amiri F., Millan D., Arroyo M., Silani M., Rabczuk T.: Fourth order phase-field model for local max-ent approximants applied to crack propagation, Computer Methods in Applied Mechanics and Engineering, 2016, 312(C), 254-275
[5] Areias P., Rabczuk T., Msekh M.: Phase-field analysis of finite-strain plates and shells including element subdivision, Computer Methods in Applied Mechanics and Engineering, 2016, 312(C), 322-350
[6] Areias P., Soares C.A.M., Rabczuk T., Garcao J.: A finite-strain solid-shell using local Löwdin frames and least-squares strains, Computer Methods in Applied Mechanics and Engineering, 2016, 311, 112-133
[7] Ren H., Zhuang X., Cai Y., Rabczuk T.: Dual-Horizon Peridynamics, International Journal for Numerical Methods in Engineering, 2016, 108, 1451-1476
[8] Mortazavi B., Ostadhossein A., Rabczuk T., van Duin A.C.T.: Mechanical response of all-MoS2 single-layer hetrostructures: A ReaxFF investigation, Physical Chemistry Chemical Physics, 2016, 18(34), 23695-23701
[9] Mortazavi B., Rahaman O., Dianat A., Rabczuk T.: Mechanical responses of borophene sheets: A first-principles study, Physical Chemistry Chemical Physics, 2016, 18(39), 27405-27413
[10] Le M.Q., Mortazavi B., Rabczuk T.: Mechanical properties of 2D boron: A reactive molecular dynamics investigation, Nanotechnology, 2016, 27(44), article number 445709
[11] Pawar A., Zhang Y., Jia Y., Wei X., Rabczuk T., Chan C.L., Anitescu C.: Adaptive FEM-based nonrigid image registration using truncated hierarchical B-splines, Computers and Mathematics with Applications, 2016, 72(8), 2028-2040
[12] Naghipoor J., Ferreira J.A., de Oliveira P., Rabczuk T.: Tuning polymeric and drug properties in a drug eluting stent: a numerical study, Applied Mathematical Modeling, 2016, 40(17-18), 8067-8086
[13] Bhardwaj G., Singh S.K., Singh I.V., Mishkra B.K., Rabczuk T.: Fatigue Crack Growth Analysis of an Interfacial Crack in Heterogeneous Materials using Homogenized XIGA, Theoretical and Applied Fracture Mechanics, 2016, 85, 294-319
[14] Javvaji, B., Budarapu P.R., Sutrakar V.K., Mahapatra D.R., Paggi M., Zi G., Rabczuk T.: Mechanical properties of Graphene: Molecular dynamics simulations correlated to continuum based scaling laws, Computational Materials Science, 2016, 319-327
[15] Jamshidian M., Thamburaja P., Rabczuk T.: A coupled finite-element and phase-field framework to modeling stressed grain growth in polycrystalline thin films, Journal of Computational Physics, 2016, 327, 779-798
[16] Zhang C., Wang C., Lahmer T., He P., Rabczuk T.: A dynamic XFEM formulation of crack identification, International Journal of Mechanics & Materials in Design, 2016, 12(4), 427-448
[17] Mortazavi B., Dianat A., Rahaman O., Cuniberti G., Rabczuk T.: Borophene as an anode material for Ca, Mg, Na or Li ion storage: A first-principle study, Journal of Power Sources, 2016, 329, 456-461, 10.1016/j.jpowsour.2016.08.109
[18] Zhu H., Wu W., Zhuang X., Cai Y., Rabczuk T.: Method for estimating normal contact parameters in collision modeling using discontinuous deformation analysis, International Journal of Geomechanics, 2016, 10.1061/(ASCE)GM.1943-5622.0000745, E4016011
[19] He B., Mortazavi B., Zhuang X., Rabczuk T.: Modeling Kapitza Resistance of Two-Phase Composite Material, Composite Structures, 2016, 152, 939-946
[20] Thai C.H., Nguyen T.N., Rabczuk T., Nguyen-Xuan H.: An improved moving Kriging mesh-free method for plate analysis using a refined plate theory, Computers & Structures, 2016, 176, 34-49
[21] Shirazi A.H.N., Mortazavi B., Mohebbi F., He B., Rabczuk T.: Paraffin nanocomposites for heat management of Lithium-ion batteries: A computational investigation, Journal of Nanomaterials, 2016, Volume 2016, Article number 2131946
[22] Areias P., Samaniego E., Rabczuk T.: A staggered approach for the coupling of Cahn-Hilliard type diffusion and finite strain elasticity, Computational Mechanics, 2016, 57(2), 339-351
[23] Yousefi H., Ghorashi Sh., Rabczuk T.: Directly simulation of second order hyperbolic systems in second order form via the regularization concept, Communications in Computational Physics, 2016, 20(1), 86-135
[24] Gui Y-L., Bui H.H., Zhang Q.-B., Kodikara J., Zhao J., Rabczuk T.: Modelling the dynamic failure of brittle rocks using a hybrid continuum-discrete element method with a mixed-mode cohesive fracture model, International Journal of Impac Engineering, 2016, 87, 146-155
[25] Silani M., Talebi H., Hamouda A.S., Rabczuk T.: Nonlocal damage modelling in clay/epoxy nanocomposites using a multiscale approach, Journal of Computational Science, 2016, 15, 18-23
[26] Abadi R., Uma R.P., Izadifar M., Rabczuk T.: The effect of temperature and topological defects on fracture strength of grain boundaries in single-layer polycrystalline boron-nitride nanosheet, Computational Materials Science, 2016, 123, 277-286
[27] Mortazavi B., Dianat A., Cuniberti G., Rabczuk T.: Application of silicene, germanene and stanene for Na or Li ion storage: A theoretical investigation, Electrochimica Acta, 2016, 213, 865-870, 10.1016/j.electacta.2016.08.027
[28] Rabizadeh E., Bagherzadeh A.S., Rabczuk T.: Goal-oriented error estimation and adaptive mesh refinement in dynamic coupled thermoelasticity, Computers & Structures, 2016, 173, 187-211
[29] Mortazavi B., Ramahan O., Rabczuk T., Pereira L.F.C: Thermal Conductivity and Mechanical Properties of Nitrogenated Holey Graphene, Carbon, 2016, 106, 1-8
[30] Vu-Bac N., Lahmer T., Zhuang X., Nguyen-Thoi T., Rabczuk T.: A software framework for probabilistic sensitivity analysis for computationally expensive models, Advances in Engineering Software, 2016, 100, 19-31
[31] Areias P., Cesar de Sa J., Rabczuk T.: Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations, Engineering Structures, 2016, 124, 344-360
[32] Nguyen B.H., Tran H.D., Anitescu C., Zhuang X., Rabczuk T.: An Isogeometric Symmetric Galerkin Boundary Element Method for Elastostatic Analysis, Computer Methods in Applied Mechanics and Engineering, 2016, 306, 252-275
[33] Pereira L.F.C., Mortazavi B., Makaremi M., Rabczuk T.: Anisotropic thermal conductivity and mechanical properties of phagraphene: A molecular dynamics study, Rsc Advances, 2016, 6, 57773 – 57779
[34] Lu Z., Wu L., Zhuang X., Rabczuk T.: Quantitative assessment of engineering geological suitability for multilayer Urban Underground Space, Tunneling and Underground Space Technology, 2016, 59, 65-76
[35] Nanthakumar S., Lahmer T., Zhuang X., Park H.S., Rabczuk T.: Topology Optimization of Piezoelectric Nanostructures, Journal of the Mechanics and Physics of Solids, 2016, 94, 316-335
[36] Areias P., Rabczuk T., Camanho P.: Finite-strain laminates: bending-enhanced hexahedron and delamination, Composite Structures, 2016, 139, 277-290
[37] Hamdia K., Zhuang X., He P., Rabczuk T.: Fracture toughness of polymeric particle nanocomposites: Evaluation of Models performance using Bayesian method, Composite Science and Technology, 2016, 126, 122-129
[38] Msekh M.A., Silani M., Jamshidian M., Areias P., Zhuang X., Zi G., He P., Rabczuk T.: Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase-field model, Composites Part B: Engineering, 2016, 93, 97-114
[39] Quoc T.T., Rabczuk T., Meschke G., Bazilevs Y.: A higher-order stress-based gradient-enhanced damage model based on isogeometric analysis, Computer Methods in Applied Mechanics and Engineering, 2016, 304, 584-604
[40] Mousavi A.A., Arash B., Zhuang X., Rabczuk T.: A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites, Composites Part B: Engineering, 2016, 95, 404-411
[41] Bui Quoc T., Hirose S., Zhuang C., Rabczuk T., Wu C.T., Saitoh T., Lei J.: Extended Isogeometric Analysis for Dynamic Fracture in Multiphase Piezoelectric/Piezomagnetic Composites, Mechanics of Materials, 2016, 97, 135-163
[42] Areias P., Msekh M.A., Rabczuk T.: Damage and fracture algorithm using the screened Poisson equation and local remeshing, Engineering Fracture Mechanics, 2016, 158, 116-143
[43] Diyaroglu C., Oterkus E., Madenci E., Rabczuk T., Siddiq A.: Peridynamic modeling of composite laminates under explosive loading, Composite Structures, 2016, 144, 14-23
[44] Mortazavi B., Fan Z., Pereira L.F.C., Harju A., Rabczuk T.: Amorphized graphene: a stiff material with low thermal conductivity, Carbon, 2016, 103, 318-326
[45] Nanthakumar S., Lahmer T., Zhuang X., Zi G., Rabczuk T.: Detection of material interfaces using a regularized level set method in piezoelectric structures, Inverse Problems in Science and Engineering, 2016, 24(1), 153 – 176
[46] Ramahan O., Mortazavi B., Rabczuk T.: A first-principles study on the effect of oxygen content on the structural and electronic properties of silicon suboxide as anode material for Lithium Ion Batteries, Journal of Power Sources, 2016, 307, 657 – 664
[47] Wang C.X., Zhang C., Jiang J.W., Park H.S., Rabczuk T.: Mechanical Strain Effect on the Black Phosphorus Nanoresonators, Nanoscale, 2016, 8, 901-905
[48] Wang C.X., Zhang C., Jiang J.W., Rabczuk T.: A Coarse-Grained Simulation for the Folding of Molybdenum Disulphide, Journal of Physics D: Applied Physics, 2016, 49, 025302, doi:10.1088/0022-3727/49/2/025302
[49] Arash B., Park H.S., Rabczuk T.: Coarse-grained model of the J-integral fracture toughness in short carbon nanotube reinforced polymer composites, Carbon, 2016, 96, 1084-1092
[50] Areias P., Rabczuk T., Mota Soares C.: Least-squares finite strain hexahedral element/constitutive coupling based on parametrized configurations and the Lowdin frame, Finite Elements in Analysis and Design, 2016, 108, 96-109
[51] Jamshidian M., Thamburaja P., Rabczuk T.: Modeling the effect of surface energy on stressed grain growth in cubic polycrystalline bodies, Scripta Materialia, 2016, 209-213, 10.1016/j.scriptamat.2015.11.005
[52] Amani J., Oterkus E., Areias P.M.A., Zi G., Nguyen-Thoi T., Rabczuk T.: A non-ordinary state-based peridynamics formulation for brittle and ductile fracture analysis of thermoplasticity problems, International Journal of Impact Engineering, 2016, 87, 83-94
2015
[1] Areias P., Reinoso J., Camanho P., Rabczuk T.: A constitutive-based element-by-element crack propagation algorithm with local remeshing, Computational Mechanics, 2015, 56(2), 291-315
[2] Xu G., Gueler E., Wu X., Hui K.-C., Wang G., Rabczuk T.: Quasi-harmonic Bezier approximation of minimal surfaces for finding forms of structural membranes, Computers & Structures, 2015, 161, 55-63
[3] Jamshidian M., Thamburaja P., Rabczuk T.: A continuum state variable theory to model the size-dependent surface energy of nanostructures, Physical Chemistry Chemical Physics, 2015, 17, 25494-25498, DOI: 10.1039/C5CP04375A
[4] Vu-Bac N., Bessa M., Rabczuk T., Liu W.K.: A multiscale model for the quasi-static thermo-plastic behavior of highly cross-linked glassy polymers, Macromolecules, 2015, 48(18), 6713-6723
[5] Almasi A., Silani M., Talebi H., Rabczuk T.: Stochastic analysis of the inter-phase effects on the mechanical properties of clay/epoxy nano-composites, Composite Structure, 2015, 133, 1302 – 1312
[6] Arash B., Park H.S., Rabczuk T.: Tensile fracture behavior of short carbon nanotube reinforced polymer composites: a coarse-grained model, Composite Structures, 2015, 134, 981- 988
[7] Hamdia K., Msekh M.A., Silani M., Vu-Bac N., Zhuang X., Nguyen-Thoi T., Rabczuk T.: Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling, Composite Structures, 2015, 133, 1177-1190
[8] Areias P., Rabczuk T.:, Cesar de Sa J., Jorge R.N.: A semi-implicit finite strain shell algorithm using in-plane strains based on least-squares, Computational Mechanics, 2015, 55(4), 673-696
[9] Mortazavi B., Pereira L.F.C., Jiang J.W., Rabczuk T.: Modelling heat conduction in polycrystalline hexagonal boron-nitride films, Scientific Reports, 2015, 5, art. no. 13228
[10] Budarapu P.R., Javvaji B., Sutrakar V.K., Mahapatra D.R., Zi G., Rabczuk T.: Crack propagation in Graphene sheet, Journal of Applied Physics, 2015, 118 (6), art. no. 064307
[11] Zhao J., Jia Y., Wei N., Rabczuk T.: Binding energy and mechanical stability of two parallel and crossing carbon nanotubes, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 471 (2189), art. no. 20150229, http://dx.doi.org/10.1098/rspa.2015.0229
[12] Ben S., Zhao J., Rabczuk T.: Does Hooke’s law work in helical nanosprings?, Physical Chemistry Chemical Physics, DOI: 10.1039/c5cp02802g, 2015, 17 (32) pp. 20990 - 20997
[13] Ghasemi H., Kerfriden P., Bordas S.P.A., Muthu J., Zi G., Rabczuk T.: Probabilistic multiconstraints optimization of cooling channels in ceramic matrix composites, Composites Part B: Engineering, 2015, 81, 107-119
[14] Bayat M., Ghorashi S.Sh., Amani J., Andersen L., Ibsen L.B., Rabczuk T., Zhuang X.,Talebi H.: Recovery-based error estimation in the dynamic analysis of offshore wind turbine monopile foundations, Computers and Geotechnics, 2015, 70, 24-40
[15] Nguyen V.P., Anitescu C., Bordas S.P.A., Rabczuk T.: Isogeometric analysis: An overview and computer implementation aspects, Mathematics and Computers in Simulations, 2015, 117, art. no. 4190, 89-116
[16] Nanthakumar S., Valizadeh N., Park H., Rabczuk T.: Surface effects on shape and topology optimization of nanostructures, Computational Mechanics, 2015, 56(1), 97-112
[17] Jia Y., Anitescu C., Ghorashi S. , Rabczuk T.: Extended Isogeometric Analysis for Material Interface Problems, IMA Journal of Applied Mathematics, 2015, 80(3), 608-633
[18] Arash B., Park H., Rabczuk T.: Mechanical properties of carbon nanotube bundle-reinforced polymer nano composites: a coarse-grained approach, Composites Part B: Engineering, 2015, 80, 92-100
[19] Areias P., Rabczuk T.: A finite strain quadrilateral based on least-squares assumed strains, Engineering Structures, 2015, 100, 1-16
[20] Areias P., Rabczuk T.:, Cesar de Sa J.: Semi-implicit finite strain constitutive integration of porous plasticity models, Finite Elements in Analysis and Design, 2015, 104, 41-55
[21] Arash B., Rabczuk T., Jiang J.W.: Nanoresonators and their applications: a state of the art review, Applied Physics Reviews 2, 2015, 021301, http://dx.doi.org/10.1063/1.4916728
[22] Jiang J.W., Rabczuk T., Park H.S.: A Stillinger-Weber Potential for Single-Layer Black Phosphorus, and the Importance of Cross-Pucker Interactions for Negative Poisson’s Ratio and Edge Stress-Induced Bending, Nanoscale, 2015, DOI: 10.1039/C4NR07341J
[23] Valizadeh N., Bazilevs Y., Chen J.S., Rabczuk T.: A Coupled IGA-Meshfree Discretization of Arbitrary Order of Accuracy and without Global Geometry Parameterization, Computer Methods in Applied Mechanics and Engineering, 2015, 293, 20-37
[24] Ben S., Zhao J., Zhang Y., Rabczuk T.: The interface strength and debonding for composite structures: review and recent developments, Composite Structures, 2015, 129, 8-26
[25] Jia Y., Zhang Y., Rabczuk T.: A Novel Dynamic Multilevel Technique for Image Registration, Computers and Mathematics with Applications, 2015, 69(9), 909-925
[26] Hamdia K., Lahmer T., Nguyen-Thoi T., Rabczuk T., : Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS, Computational Materials Science, 2015, 102, 304-313
[27] Rabizadeh E., Saboor Bagherzadeh A., Rabczuk T.: Application of goal-oriented error estimation and adaptive mesh refinement on thermo-mechanical multifield problems, Computational Materials Science, 2015, 102, 27 – 44
[28] Ghasemi H., Brighenti R., Zhuang X., Muthu J., Rabczuk T.: Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach, Structural and Multidisciplinary Optimization, 2015, 51(1), 99-112
[29] Areias P., Rabczuk T., Cesar de Sa J.M., Garcao J.E.: Finite strain quadrilateral shell using least-squares fit of relative Lagrangian in-plane strains, Finite Elements in Analysis and Design, 2015, 98, 26-40, DOI: 10.1016/j.finel.2015.01.004 (Scopus)
[30] Mortazavi B., Rabczuk T.: Multiscale modeling of heat conduction in graphene laminates, Carbon, 2015, 85, 1-7
[31] Mortazavi B., Cuniberti G., Rabczuk T.: Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study, Computational Materials Science, 2015, 99, 285-289, DOI: 10.1016/j.commatsci.2014.12.036 (Scopus)
[32] Talebi H, Silani M., Rabczuk T.: Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation, Advances in Engineering Software, 2015, 80, 82-92
[33] Anitescu C., Jia Y., Zhang Y., Rabczuk T.: An isogeometric collocation method using superconvergent points, Computer Methods in Applied Mechanics and Engineering, 2015, 284, 1073-1097
[34] Kumar S., Singh I., Mishra B.K., Rabczuk T.: Modeling and Simulation of Kinked Cracks by Virtual Node XFEM, Computer Methods in Applied Mechanics and Engineering, 2015, 283, 1425-1466, DOI: 10.1016/j.cma.2014.10.019 (Scopus)
[35] Vu-Bac N., Silani M., Lahmer T., Zhuang X. , Rabczuk T.: A unified frame-work for stochastic predictions of mechanical properties of polymeric nanocomposites, Computational Materials Science, 2015, 96, 520 – 535, DOI: 10.1016/j.commatsci.2014.04.066 (Scopus)
[36] Thai H.C., Nguyen-Xuan H., Bordas S., Nguyen-Thanh N.,Rabczuk T.: Iso-geometric analysis of laminated composite plates using the higher-order shear deformation theory, Mechanics of Advanced Materials and Structures, 2015, 22(6), 451-469
[37] Zhao J., Lu L., Rabczuk T.: The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers, Computational Materials Science, 2015, 96, 567 – 572, DOI: 10.1016/j.commatsci.2014.03.071 (Scopus)
[38] Yang S.W., Budarapu P.R., Mahapatra D.R., Bordas S.P.A., Zi G., Rabczuk T.: A Meshless Adaptive Multiscale Method for Fracture, Computational Materials Science, in 2015, 96, 382 – 395, DOI: 10.1016/j.commatsci.2014.08.054 (Scopus)
[39] Ghasemi H., Kerfriden P., Bordas S.P.A., Muthu J., Zi G.,, Rabczuk T.: Interfacial shear stress optimization in sandwich beams with polymeric core using non-uniform distribution of reinforcing ingredients, Composite Structures, 2015, 120, 221 - 230
[40] Nguyen-Thanh N., Valizadeh N., Nguyen M.N., Nguyen-Xuan H. , Zhuang X. , Areias P., Zi G., Bazilevs Y., De Lorenzis L., Rabczuk T.: An extended isogeometric thin shell analysis based on Kirchhoff-Love theory, Computer Methods in Applied Mechanics and Engineering, 2015, 284, 265 – 291
[41] Budarapu P., Narayana T.S.S., Rammohan B., Rabczuk T.: Directionality of sound radiation from rectangular panels, Applied Acoustics, 2015, 89, 128-140, DOI: 10.1016/j.apacoust.2014.09.006 (Scopus)
[42] Ghorashi S., Valizadeh N., Mohammadi S., Rabczuk T.: T-spline based XIGA for Fracture Analysis of Orthotropic Media, Computers & Structures, 2015, 147, 138-146
[43] Areias P., Rabczuk T., Queiros de Melo F.J.M., Cesar de Sa J.: Coulomb frictional contact by explicit projection in the cone for finite displacement quasi-static problems, Computational Mechanics, 2015, 55(1), 57-72
[44] Zhao J., Lu L., Zhang Z., Guo W., Rabczuk T.: Continuum modeling of the cohesive energy for the interfaces between films, spheres, coats and substrates, Computational Materials Science, 2015, 96, 432 – 438, DOI: 10.1016/j.commatsci.2014.06.050 (Scopus)
[45] Silani M., Talebi H., Ziaei-Rad S., Hamouda A.M.S., Zi G., Rabczuk T.: A three dimensional Extended Arlequin Method for Dynamic Fracture, Computational Materials Science, 2015, 96, 425 – 431
[46] Msekh M.A., Sargado M., Jamshidian M., Areias P., Rabczuk T.: ABAQUS implementation of phase-field model for brittle fracture, Computational Materials Science, 2015, 96, 472 – 484, DOI: 10.1016/j.commatsci.2014.05.071 (Scopus)
[47] Vu-Bac N., Rafiee R., Zhuang X., Lahmer T., Rabczuk T.: Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters, Composites Part B: Engineering, 2015, 68, 446 – 464, DOI: 10.1016/j.compositesb.2014.09.008 (Scopus)
2014
[1] Silani M., Ziaei-Rad S., Talebi H., Rabczuk T.: A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites, Theoretical and Applied Fracture Mechanics, 2014, 74, 30-38, DOI: 10.1016/j.tafmec.2014.06.009 (Scopus)
[2] Areias P., Pinto da Costa A., Rabczuk T., Queiros de Melo F.J.M., Diasda-Costa D., Bezzeghoud M.: An alternative formulation for quasi-static frictional and cohesive contact problems, Computational Mechanics, 2014, 53, 807-824, DOI: 10.1007/s00466-013-0932-x (Scopus)
[3] Jamshidian M., Zi G., Rabczuk T.: Phase field modeling of ideal grain growth in a distorted microstructure, Computational Materials Science, 2014, 95, 663-671, DOI: 10.1016/j.commatsci.2014.08.024 (Scopus)
[4] Xu G., Mourrain B., Galligo A., Rabczuk T.: High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods, Computational Mechanics, 2014, 54(5), 1303-1313, DOI: 10.1007/s00466-014-1060-y (Scopus)
[5] Zhao J., Jiang J.W., Wang L., Guo W., Rabczuk T.: Coarse-grained potentials of single-walled carbon nanotubes, Journal of Mechanics and Physics of Solids, 2014, 71, 197 – 218, DOI: 10.1016/j.jmps.2014.06.011 (Scopus)
[6] Areias P.M.A., Rabczuk T., J.I. Barbosa: The extended unsymmetric frontal solution for multiple-point constraints, Engineering Computations, 2014, 31(7), 1582-1607, DOI: 10.1108/EC-10-2013-0263 (Scopus)
[7] Nguyen-Thoi T., Rabczuk T., Lam-Phat T., Ho-Huu V., Phung-Van P.: Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3), Theoretical and Applied Fracture Mechanics, 2014, 72, 150-163, DOI: 10.1016/j.tafmec.2014.02.004 (Scopus)
[8] Areias P.M.A., Rabczuk T., P.P. Camanho: Finite strain fracture of 2D problems with injected anisotropic softening elements, Theoretical and Applied Fracture Mechanics, 2014, 72, 50-63, DOI: 10.1016/j.tafmec.2014.06.006 (Scopus)
[9] Ben S., Zhao J., Rabczuk T.: A theoretical analysis of interface debonding for coated sphere with functionally graded variation interphase, Composite Structures, 2014, 117 (1), 288 – 297, DOI: 10.1016/j.compstruct.2014.07.004 (Scopus)
[10] Silani M., Talebi H., Ziaei-Rad S., Kerfriden P., Bordas S., Rabczuk T.: Stochastic Modelling of Clay/Epoxy Nanocomposites, Composite Structures, 2014, 118, 241-249, DOI: 10.1016/j.compstruct.2014.07.009 (Scopus)
[11] Beex L.A.A., Kerfriden P., Rabczuk T., Bordas S.P.A.: Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation, Computer Methods in Applied Mechanics and Engineering, 2014, 279, 348-378, DOI: 10.1016/j.cma.2014.06.018 (Scopus)
[12] Zhao J., Kou L., Jiang J.W., Rabczuk T.: Tension-induced phase transition of Single-Layer Molybdenum Disulphide (MoS2) at low temperatures, Nanotechnology, 2014, 25(29), art. no. 295701, DOI: 10.1088/0957-4484/25/29/295701 (Scopus)
[13] Nguyen V.P., Kerfriden P., Bordas S.P.A., Rabczuk T.: Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm, Computer-Aided Design, 2014, 55, 49-63, DOI: 10.1016/j.cad.2014.05.004 (Scopus)
[14] Budarapu P., Gracie R., Bordas S., Rabczuk T.: An adaptive multiscale method for quasi-static crack growth, Computational Mechanics, 2014, 53(6), 1129-1148, DOI: 10.1007/s00466-013-0952-6 (Scopus)
[15] Chen L., Nguyen-Thanh N., Nguyen-Xuan H., Rabczuk T., Bordas S.P.A., Limbert G.: Explicit finite deformation analysis of isogeometric membranes, Computer Methods in Applied Mechanics and Engineering, 2014, 277, 104-130, DOI: 10.1016/j.cma.2014.04.015 (Scopus)
[16] Akmar A.B.I., Lahmer T., Bordas S., Beex L., Rabczuk T.: Uncertainty criteria of Dry Woven Fabric: A Sensitivity Analysis on Material Properties, Composite Structures, 2014, 116, 1-17, DOI: 10.1016/j.compstruct.2014.04.014 (Scopus)
[17] Zhao J., Lu L.,Rabczuk T.: Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines, Journal of Chemical Physics, 2014, 140, 204704, http://dx.doi.org/10.1063/1.4878115 (Scopus)
[18] Talebi H., Silani M., Bordas S., Kerfriden P., Rabczuk T.: A Computational Library for Multiscale Modelling of Material Failure, Computational Mechanics, 2014, 53(5), 1047-1071, DOI: 10.1007/s00466-013-0948-2 (Scopus)
[19] Zhang Y., Zhuang X., Muthu S.D.J., Mabrouki T., Fontaine M., Gong Y., Rabczuk T.: Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation, Composites Part B: Engineering, 2014, 63, 27-33, DOI: 10.1016/j.compositesb.2014.03.009 (Scopus)
[20] Nanthakumar S.S., Lahmer T., Rabczuk T.: Detection of multiple flaws in Piezo-electric Structures using XFEM and Level sets, Computer Methods in Applied Mechanics and Engineering, 2014, 275, 98-112, DOI: 10.1016/j.cma.2014.03.001 (Scopus)
[21] Amiri F., Milan D., Shen Y., Rabczuk T., Arroyo M.: Phase-field modeling of fracture in linear thin shells, Theoretical and Applied Fracture Mechanics, 2014, 69, 102 - 109, DOI: 10.1016/j.tafmec.2013.12.002 (Scopus)
[22] Budarapu P., Gracie R. Shih-Wei Y., Zhuang X., Rabczuk T.: Efficient Coarse Graining in Multiscale Modeling of Fracture, Theoretical and Applied Fracture Mechanics, 2014, 69, 126 – 143, DOI: 10.1016/j.tafmec.2013.12.004 (Scopus)
[23] Jiang J.W., Park H., Rabczuk T.: M oS 2 Nanoresonators: Intrinsically Better Than Graphene?, Nanoscale, 2014, 6(7), 3618 – 3625, DOI: 10.1039/c3nr05991j (Scopus)
[24] Jiang J.W., Wang B.S., Rabczuk T.: Phonon Modes in Single-Walled Molybdenum Disulphide (MoS2) Nanotubes: Lattice Dynamics Calculation and Molecular Dynamics Simulation, Nanotechnology, 2014, 25(10), art. no. 105706, DOI: 10.1088/0957-4484/25/10/105706 (Scopus)
[25] Amani J., Bagherzadeh A.S., Rabczuk T.: Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method, Mathematical Problems in Engineering, 2014, Article ID 721240, doi:10.1155/2014/721240 (Scopus)
[26] Jamshidian M., Rabczuk T.: Phase field modelling of stressed grain growth: analytical study and the effect of microstructural length scale, Journal of Computational Physics, 2014, 261, 23 – 35, DOI: 10.1016/j.jcp.2013.12.022 (Scopus)
[27] Ghasemi H., Rafiee R., Zhuang X., Muthu J., Rabczuk T.: Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling, Computational Materials Science, 2014, 85, 295-305, DOI: 10.1016/j.commatsci.2014.01.020 (Scopus)
[28] Nguyen-Thanh N., Muthu J., Zhuang X., Rabczuk T.: An adaptive three-dimensional RHT-spline formulation in linear elasto-statics and elasto-dynamics, Computational Mechanics, 2014, 53(2), 369-385, DOI: 10.1007/s00466-013-0914-z (Scopus)
[29] Amiri F., Anitescu C., Arroyo M, Bordas S., Rabczuk T.: XLME interpolants, a seamless bridge between XFEM and enriched meshless methods, Computational Mechanics, 2014, 53(1), 45-57, DOI: 10.1007/s00466-013-0891-2 (Scopus)
[30] Zhuang X., Huang R., Rabczuk T., Liang C.: A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage, Mathematical Problems in Engineering, 2014, vol. 2014, Article ID 179169, doi:10.1155/2014/179169, DOI: 10.1155/2014/179169 (Scopus)
[31] Ghasemi H., Brighenti R., Zhuang X., Muthu J., Rabczuk T.: Optimization of fiber distribution in fiber reinforced composite by using NURBS functions, Computational Materials Science, 2014, 83(15), 463-473, DOI: 10.1016/j.commatsci.2013.11.032 (Scopus)
[32] Vu-Bac N., Lahmer T., Zhang Y., Zhuang X., Rabczuk T.: Stochastic predictions of interfacial characteristic of carbon nanotube polyethylene composites, Composites Part B: Engineering, 2014, 59, 80-95, DOI: 10.1016/j.compositesb.2013.11.014 (Scopus)
[33] Jiang J.W., Wang B.S., Park H., Rabczuk T.: Adsorbate Migration Effects on Continuous and Discontinuous Temperature-Dependent Transitions in the Quality Factors of Graphene Nanoresonators, Nanotechnology, 2014, 25, 025501, doi:10.1088/0957- 4484/25/2/025501 (Scopus)
[34] Vu-Bac N., Lahmer T., Keitel H., Zhao J., Zhuang X., Rabczuk T.: Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations, Mechanics of Materials, 2014, 68, 70-84, DOI: 10.1016/j.mechmat.2013.07.021 (Scopus)
[35] Thai C.H., Ferreira A.J.M., Bordas S., Rabczuk T., Nguyen-Xuan H.: Iso-geometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory, European Journal of Mechanics - A/Solids, 2014, 43, 89 – 108, DOI: 10.1016/j.euromechsol.2013.09.001 (Scopus)
[36] Zhuang, X., Rabczuk, T.: Editorial - Multiscale modeling of material failure, 2014, Theoretical and Applied Fracture Mechanics, 72 (1), p. 1, DOI: 10.1016/j.tafmec.2014.07.009 (Scopus)
2013
[1] Zhao J., Wu J., Jiang J.W., Zhang Z., Rabczuk T.: Thermal conductivity of carbon nanocoils, Applied Physics Letters, 2013, 103(23), art. no. 233511, DOI: 10.1063/1.4839396 (Scopus)
[2] Zhao J., Jiang J.W., Rabczuk T.: Temperature-dependent mechanical properties of Single-Layer Molybdenum Disulphide (MoS2): molecular dynamics nanoindentation simulations, Applied Physics Letters, 2013, 103(23), art. no. 231913, DOI: 10.1063/1.4844935 (Scopus)
[3] Areias P., Dias-da-Costa D., Sargado J.M., Rabczuk T.: Element-wise algorithm for modeling ductile fracture with the Rousselier yield function, Computational Mechanics, 2013, 52(6), 1429-1443, DOI: 10.1007/s00466-013-0885-0 (Scopus)
[4] BaniHani S., Rabczuk T., Almomani T.: POD for real time simulation of hyperelastic soft biological tissue using the point collocation method of finite spheres, Mathematical Problems in Engineering, 2013, Article ID 386501, http://dx.doi.org/10.1155/2013/386501 (Scopus)
[5] Talebi H., Silani M., Bordas S. P. A., Kerfriden P., Rabczuk T.: Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture, International Journal for Multiscale Computational Engineering, 2013, 11(6), 527 – 541, DOI: 10.1615/IntJMultCompEng.2013005838 (Scopus)
[6] Nanthakumar S.S., Lahmer T., Rabczuk T.: Detection of flaws in piezoelectric structures using XFEM, International Journal of Numerical Methods in Engineering, 2013, 96(6), 373 – 389, DOI: 10.1002/nme.4565 (Scopus)
[7] Areias P., Rabczuk T., Dias-da-Costa D.: Element-wise fracture algorithm based on rotation of edges, Engineering Fracture Mechanics, 2013, 110, 113 – 137, DOI: 10.1016/j.engfracmech.2013.06.006 (Scopus)
[8] Jiang J.W., Zhuang X., Rabczuk T.: Orientation Dependent Intrinsic Thermal Conductivity in Single-Layer M oS 2 , Scientific Reports, 2013, arXiv: 1303.5548, DOI: 10.0.4.14/srep02209 (Scopus)
[9] Jiang J.W., Park H., Rabczuk T.: Polar Surface Effects on the Thermal Conductivity in ZnO Nanowires: a Shell-Like Surface Reconstruction-Induced Preserving Mechanism, Nanoscale, 2013, 5, 11035-11043, doi: 10.1039/c3nr03567k (Scobus)
[10] Areias P., Rabczuk T., Camanho P.P.: Initially rigid cohesive laws and fracture based on edge rotations, Computational Mechanics, 2013, 52(4), 931 – 947, DOI: 10.1007/s00466-013-0855-6 (Scopus)
[11] Jiang J.W.,Qi Z., Park H., Rabczuk T.: Elastic Bending Modulus of Single-Layer Molybdenum Disulphide (M oS 2 ): Finite Thickness Effect, Nanotechnology, 2013, 24(43), 43570, DOI: 10.1088/0957-4484/24/43/435705 (Scopus)
[12] Jia Y., Zhang Y., Xu G., Zhuang X.Y., Rabczuk T.: Reproducing kernel triangular B-spline-based FEM for solving PDEs, Computer Methods in Applied Mechanics and Engineering, 2013, 267, 243-358, DOI: 10.1016/j.cma.2013.08.019 (Scopus)
[13] Jiang J.W., Park H., Rabczuk T.: Preserving the Q-Factors of ZnO Nanoresonators via Polar Surface Reconstruction, Nanotechnology, 2013, 24, 405705, doi:10.1088/0957-4484/24/40/405705 (Scopus)
[14] Zhang Y., Wei N., Zhao J., Gong Y., Rabczuk T.: Quasi-analytical solution for the stable system of the multi-layer folded graphene wrinkles, Journal of Applied Physics, 2013, 114(6), DOI: 10.1063/1.4817768 (Scopus)
[15] Jiang J.W., Park H., Rabczuk T.: Molecular Dynamics Simulations of Single-Layer Molybdenum Disulphide (M oS 2 ): Stillinger-Weber Parametrization, Mechanical Properties and Thermal Conductivity, Journal of Applied Physics, 2013, 114(6), DOI: 10.1063/1.4818414 (Scopus)
[16] Vu-Bac N., Nguyen-Xuan H., Chen L., Lee C.K., Zi G., Zhuang X., Liu G.R., Rabczuk T.: A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics, Journal of Applied Mathematics, 2013, vol. 2013, Article ID 978026, DOI: 10.1155/2013/978026 (Scopus)
[17] Jiang J.W., Park H., Gall K., Leach A., Rabczuk T.: A Surface Stacking Fault Energy Approach to Predicting Defect Nucleation in Surface-Dominated Nanostructures, Journal of the Mechanics and Physics of Solids, 2013, 61(9), 1915-193, DOI: 10.1016/j.jmps.2013.04.008 (Scopus)
[18] Zhang Y., Zhao J., Jia Y., Mabrouki T., Gong Y., Wei N., Rabczuk T.: An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase, Composite Structures, 2013, 104, 261-269, DOI: 10.1016/j.compstruct.2013.04.029 (Scopus)
[19] Jiang J.W., Wang B.S., Rabczuk T.: Why twisting angles are diverse in graphene Moir’e patterns?, Journal of Applied Physics, 2013, 113(19), art. no. 194304, DOI: 10.1063/1.4805036 (Scopus)
[20] Areias P., Rabczuk T.: Finite strain fracture of plates and shells with configurational forces and edge rotation, International Journal for Numerical Methods in Engineering, 2013, 94(12), 1099-1122, DOI: 10.1002/nme.4477 (Scopus)
[21] Zhao J., Jiang J.W., Wei N., Zhang Y., Rabczuk T.: Thermal conductivity dependence on chain length in amorphous polymers, Journal of Applied Physics, 2013, 113, 184304, doi: 10.1063/1.4804237, DOI: 10.1063/1.4804237 (Scopus)
[22] Kerfriden P., Schmidt K.M., Rabczuk T., Bordas S.: Statistical extraction of process zones and representative subspaces in fracture of random composites, International Journal for Multiscale Computational Engineering, 2013, 11(3), 253-287, DOI: 10.1615/IntJMultCompEng.2013005939 (Scopus)
[23] Jiang J.W., Rabczuk T.: Modulation of Thermal Conductivity in kinked Silicon Nanowires: Phonon interchanging and pinching effects or Reduction of thermal conductivity in kinked silicon nanowire superlattices, Nano Letters, 2013, 13(4), 1670-1674, DOI: 10.1021/nl400127q (Scopus)
[24] Jiang J.W., Rabczuk T.: Mechanical Oscillation of Kinked Silicon Nanowires: a Natural Nanoscale Spring, Applied Physics Letters, 2013, 102, 123104, DOI: 10.1063/1.4799029 (Scopus)
[25] Rafiee R., Rabczuk T., Pourazizi R., Zhao J., Zhang Y.: Challenges of the modeling methods for investigating the interaction between the CNT and the surrounding polymer, Advances in Materials Science and Engineering, 2013, Article ID 183026, Vol. 2013. doi:10.1155/2013/183026 (Scopus)
[26] Joshi S., Hildebrand J., Aloraier A.S., Rabczuk T.: Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate, Computational Materials Science, 2013, 69, 559-565, DOI: 10.1016/j.commatsci.2012.11.029 (Scopus)
[27] Jiang J.W., Zhao J., Rabczuk T.: Size-Sensitive Young’s Modulus of Kinked Silicon Nanowires, Nanotechnology, 2013, 24, 185702, doi:10.1088/0957-4484/24/18/185702 (Scopus)
[28] Nguyen-Thoi T., Phung-Van P., Rabczuk T., Nguyen-Xuan H., Le-Van C.: Free and forced vibration analysis using the n-sided polygonal cell-based smoothed finite element method (nCS-FEM), International Journal of Computational Methods, 2013, 10(1), art. no. 1340008, DOI: 10.1142/S0219876213400082 (Scopus)
[29] Le C.V., Nguyen-Xuan H., Askes H., Rabczuk T., Nguyen-Thoi T.: Computation of limit load using edge-based smoothed finite element method and second-order cone programming, International Journal of Computational Methods, 2013, 10(1), art. no. 1340004, DOI: 10.1142/S0219876213400045 (Scopus)
[30] Nguyen-Thoi T., Phung-Van P., Rabczuk T., Nguyen-Xuan H., Le-Van C.: An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems, International Journal of Computational Methods, 2013, 10(1), art. no. 1340003, DOI: 10.1142/S0219876213400033 (Scopus)
[31] Phan-Dao H., Nguyen-Xuan H., Thai-Hoang C., Nguyen-Thoi T., Rabczuk T.: An edge-based smoothed finite element method for analysis of laminated composite plates, International Journal of Computational Methods, 2013, 10(1), art. no. 1340005, DOI: 10.1142/S0219876213400057 (Scopus)
[32] Bakar I., Kramer O., Bordas S.P.A., Rabczuk T.: Optimization of Elastic Properties and Weaving Patterns of Woven Composites, Composite Structures, 2013, 100, 575-591, DOI: 10.1016/j.compstruct.2012.12.043 (Scopus)
[33] Zhao J., Wang L., Jiang J.W., Wang Z., Guo W., Rabczuk T.: A comparative study of two molecular mechanics models based on harmonic potentials, Journal of Applied Physics, 2013, 113, 063509, DOI: 10.1063/1.4791579 (Scopus)
[34] Zhao J., Wei N., Fan Z., Jiang J.W., Rabczuk T.: Mechanical properties of three types of carbon allotropes, Nanotechnology, 2013, 24(9), 09570, DOI: 10.1088/0957-4484/24/9/095702 (Scopus)
[35] Zhao J., Jiang J.W., Jia Y., Guo W., Rabczuk T.: A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates, Carbon, 2013, 57, 108-119, DOI: 10.1016/j.carbon.2013.01.041 (Scopus)
[36] Kerfriden P., Goury O., Rabczuk T., Bordas S.: A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics, Computer Methods in Applied Mechanics and Engineering, 2013, 256, 169-188, DOI: 10.1016/j.cma.2012.12.004 (Scopus)
[37] Valizadeh N., Natarajan S., Gonzalez-Estrada O.A., Rabczuk T., Tinh Quoc Bui, Bordas S.P.A.: NURBS-based finite element analysis of functionally graded plates: static bending, vibration, buckling and flutter, Composite Structures, 2013, 99, 309-326, DOI: 10.1016/j.compstruct.2012.11.008 (Scopus)
[38] Areias P., Rabczuk T., Dias-da-Costa D.: Assumed-metric spherically-interpolated quadrilateral shell element, Finite Elements in Analysis and Design, 2013, 66, 53-67, DOI: 10.1016/j.finel.2012.11.006 (Scopus)
[39] Zhang Y., Zhao J., Wei N., Jiang J.W., Rabczuk T.: Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer, Composites Part B: Engineering, 2013, 45(1), 1714-1721, DOI: 10.1016/j.compositesb.2012.09.079 (Scopus)
[40] Nguyen-Xuan H., Liu G.R., Bordas S., Natarajan S., Rabczuk T.: An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order, Computer Methods in Applied Mechanics and Engineering, 2013, 253, 252-273, DOI: 10.1016/j.cma.2012.07.017 (Scopus)
2012
[1] Areias P., Rabczuk T., Dias-da-Costa D.: Asymmetric Shell Elements Based on a Corrected Updated-Lagrangian Approach, CMES-Computer Modeling in Engineering & Sciences, 2012, 88(6), 475-506 (Scopus)
[2] Jiang J.W., Park H.S., Rabczuk T.: Enhancing the mass sensitivity of graphene nanoresonators via nonlinear oscillations: The effective strain mechanism, Nanotechnology, 2012, 23(47), art. no. 475501, DOI: 10.1088/0957-4484/23/47/475501 (Scopus)
[3] Nguyen-Xuan H., Nguyen Vinh H., Bordas S., Rabczuk T., Duflot M.: A cell-based smoothed finite element method for three-dimensional solid structures, KSCE-Journal of Civil Engineering, 2012, 16(7), 1230-1242, DOI: 10.1007/s12205-012-1515-7 (Scopus)
[4] Zhao J., Guo W., Rabczuk T.: An analytical molecular mechanics model for the elastic properties of crystalline polyethylene, Journal of Applied Physics, 2012, 112(3), Article number 033516, DOI: 10.1063/1.4745035, DOI: 10.1063/1.4745035 (Scopus)
[5] Thai C.H., Nguyen-Xuan H., Nguyen-Thanh N., Le T.H., Nguyen-Thoi T., Rabczuk T.: Static, free vibration and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach, International Journal for Numerical Methods in Engineering, 2012, 91(6), 571-603, DOI: 10.1002/nme.4282 (Scopus)
[6] Natarajan S., Chakraborty S., Thangavel M., Bordas S., Rabczuk T.: Size-dependent free flexural vibration behavior of functionally graded nanoplates, Computational Materials Science, 2012, 65, 74-80, DOI: 10.1016/j.commatsci.2012.06.031 (Scopus)
[7] Nguyen-Vinh H., Bakar I., Msekh M.A., Song J.-H., Muthu J., Zi G., Le P., Bordas S., Simpson R., Natararajan S., Lahmer T., Rabczuk T.: Extended Finite Element Method for Dynamic Fracture of Piezo-Electric Materials, Engineering Fracture Mechanics, 2012, 92, 19-31, DOI: 10.1016/j.engfracmech.2012.04.025 (Scopus)
[8] Talebi H., Zi G., Silani M., Samaniego E., Rabczuk T.: A simple circular cell method for multi-level finite element analysis, Journal of Applied Mathematics, 2012, Article ID 526846, 15 pages, doi:10.1155/2012/526846, DOI: 10.1155/2012/526846 (Scopus)
[9] Talebi H., Silani M., Arnold D., Ziaei-Rad S., Rabczuk T.: On the coupling of a commercial finite element package with lammps for multiscale modeling of materials, Steel Research International, 2012, SI, 1371-1374 (Scopus)
[10] Jiang J.-W., Wang B.S., Rabczuk T.: Acoustic and breathing phonon modes in bilayer graphene with Moire-acute patterns, Applied Physics Letters, 2012, 101(2), 023113, doi: 10.1063/1.4735246(Scopus)
[11] Jiang J.-W., Zhao J., Zhou K., Rabczuk T.: Superior thermal conductivity and extremely high mechanical strength in polyethylene chains from ab initio calculation, Journal of Applied Physics, 2012, 111(12), 124304, doi: 10.1063/1.4729489, DOI: 10.1063/1.4729489 (Scopus)
[12] Areias P., Rabczuk T., Dias-da-Costa D., Piresh E.B.: Implicit solutions with consistent additive and multiplicative components, Finite Elements in Analysis and Design, 2012, 57, 15-31, DOI: 10.1016/j.finel.2012.03.007 (Scopus)
[13] Nguyen-Xuan H., Rabczuk T., Nguyen-Thoi T., Tran T., Nguyen-Thanh N.: Computation of limit and shakedown loads using a node-based smoothed finite element method, International Journal for Numerical Methods in Engineering, 2012, 90(3), 287-310, DOI: 10.1002/nme.3317 (Scopus)
[14] Chen L., Rabczuk T., Bordas S., Liu G.R., Zeng K.Y., Kerfriden P.: Extended finite element method with edge-based strain smoothing (Esm-XFEM) for linear elastic crack growth, Computer Methods in Applied Mechanics and Engineering, 2012, 209-212(4), 250-265, DOI: 10.1016/j.cma.2011.08.013 (Scopus)
[15] Talebi H., Samaniego C., Samaniego E., Rabczuk T.: On the Numerical Stability and Mass- Lumping Schemes for Explicit Enriched Meshfree Methods, International Journal for Numerical Methods in Engineering, 2012, 89(9), 1009-1027, DOI: 10.1002/nme.3275 (Scopus)
[16] Chau-Dinh T., Zi G., Lee P.S., Song J.H., Rabczuk T.: Phantom-node Method for Shell Models with Arbitrary Cracks, Computers & Structures, 2012, 92-93, 242-256, DOI: 10.1016/j.compstruc.2011.10.021 (Scopus)
[17] Simpson R., Bordas S., Trevelyan J., Kerfriden P., Rabczuk T.: An Isogeometric Boundary Element Method for elastostatic analysis, Computer Methods in Applied Mechanics and Engineering, 2012, 209-212, 87-100
[18] Talebi, H., Silani, M., Rabczuk, T.: The three dimensional extended bridging domain method for brittle fracture, 2012, Civil-Comp Proceedings, 100 (Scopus)
[19] Valizadeh, N., Ghorashi, S.Sh., Yousefi, H., Bui, T.Q., Rabczuk, T.: Transient analysis of laminated composite plates using isogeometric analysis, 2012, Civil-Comp Proceedings, 100 (Scopus)
[20] Ghorashi, S.Sh., Valizadeh, N., Mohammadi, S., Rabczuk, T.: Extended isogeometric analysis of plates with curved cracks, 2012, Civil-Comp Proceedings, 100 (Scopus)
[21] Nguyen-Thanh, N., Muthu, J., Rabczuk, T.: A three dimensional static and free vibration analysis using RHT-spline formulation, 2012, 8th South African Conference on Computational and Applied Mechanics, SACAM 2012 - Conference Proceedings, pp. 66-71. (Scobus)
[22] Simpson, R.N., Bordas, S.P.A., Trevelyan, J., Rabczuk, T.: A two-dimensional Isogeometric Boundary Element Method for elastostatic analysis, 2012, Computer Methods in Applied Mechanics and Engineering, 209-212, pp. 87-100, DOI: 10.1016/j.cma.2011.08.008 (Scopus)
2011
[1] Zhao J., Zhang Z., Guo W., Rabczuk T.: Size-dependent elastic properties of crystalline polymers via a molecular mechanics model, Applied Physics Letters, 2011, 99(24), 241902, doi:10.1063/1.3668110 (Scopus)
[2] Baiz P.M., Natarajan S., Bordas S., Kerfriden P., Rabczuk T.: Linear Buckling Analysis of Cracked Plates by SFEM and XFEM (SmXFEM), Journal of Mechanics of Materials and Structures, 2011, 6(9-10), 1213-1238, DOI: 10.2140/jomms.2011.6.1213 (Scopus)
[3] Nguyen-Thanh N., Kiendl J., Nguyen-Xuan H., Wüchner R., Bletzinger K.U., Bazilevs Y., Rabczuk T.: Rotation free isogeometric thin shell analysis using PHT-splines, Computer Methods in Applied Mechanics and Engineering, 2011, 200(47-48), 3410-3424, DOI: 10.1016/j.cma.2011.08.014 (Scopus)
[4] Bacht T., Chase J.G, MacRae G., Rodgers G.W., Rabczuk T., Dhakal R.P., Desombre J.: HF2V dissipator effects on the performance of a 3 story moment frame, Journal of Constructional Steel Research, 2011, 67(12), 1843-1849, DOI: 10.1016/j.jcsr.2011.05.007 (Scopus)
[5] Moosavi M.R., Delfanian F., Khelil A., Rabczuk T.: Orthogonal meshless finite volume method in elastodynamics, Thin-Walled Structures, 2011, 49(9), 1171-1177, DOI: 10.1016/j.tws.2011.05.003 (Scopus)
[6] Vu-Bac N., Nguyen-Xuan H., Chen L., Bordas S., Kerfriden P., Simpson R.N., Liu G.R., Rabczuk T.: A Node-based Smoothed extended Finite Element Method (NSXFEM) for Fracture Analysis, CMES-Computer Modeling in Engineering & Sciences, 2011, 73(4), 331-355 (Scopus)
[7] Thai-Hoang C., Nguyen-Thanh N., Nguyen-Xuan H., Rabczuk T.: An alternative alpha finite element method with discrete shear gap technique for analysis of laminated composite plates, Applied Mathematics and Computation, 2011, 217(17), 7324-7348, DOI: 10.1016/j.amc.2011.02.024 (Scopus)
[8] Nguyen-Thanh N., Nguyen-Xuan H., Bordas S., Rabczuk T.: Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids, Computer Methods in Applied Mechanics and Engineering, 2011, 200(21-22), 1892-1908, DOI: 10.1016/j.cma.2011.01.018 (Scopus)
[9] Bordas S., Natarajan S., Dal Pont S., Rabczuk T., Kerfriden P., Mahapatra D.R., Noel D., Gao Z.: On the performance of strain smoothing for enriched finite element approximations (XFEM/GFEM/PUFEM), International Journal for Numerical Methods in Engineering, 2011, 86(4-5), 637-666, DOI: 10.1002/nme.3156 (Scopus)
[10] Desombre J., Rodgers G.W., MacRae G.A., Rabczuk T., Dhakal R.P., Chase J.G.: Experimentally validated FEA models of HF2V damage free steel connections for use in full structural analysis, Structural Engineering and Mechanics, 2011, 37(4), 385-399, DOI: 10.12989/sem.2011.37.4.385 (Scopus)
[11] Nguyen-Thanh N., Rabczuk T., Nguyen-Xuan H., Bordas S.: An alternative alpha finite element method with discrete shear gap technique for analysis of Mindlin-Reissner plates, Finite Elements in Analysis and Design, 2011, 47(5), 519-535, DOI: 10.1016/j.finel.2011.01.004 (Scopus)
[12] Thai-Hoang, C., Nguyen-Thanh, N., Nguyen-Xuan, H., Rabczuk, T., Bordas, S.: A cell-based smoothed finite element method for free vibration and buckling analysis of shells, 2011, KSCE Journal of Civil Engineering, 15 (2), pp. 347-361, DOI: 10.1007/s12205-011-1092-1 (Scopus)
[13] Natarajan, S., Baiz, P.M., Bordas, S., Rabczuk, T., Kerfriden, P.: Natural frequencies of cracked functionally graded material plates by the extended finite element method, 2011, Composite Structures, 93 (11), pp. 3082-3092, DOI: 10.1016/j.compstruct.2011.04.007 (Scopus)
2010
[1] Nguyen-Thoi T., Vu-Do H.C., Rabczuk T., Nguyen-Xuan H.: A node-based smoothed finite element method (NS-FEM) for upper bound solution to visco-elastoplastic analysis of solids using triangular and tetrahedral meshes, Computer Methods in Applied Mechanics and Engineering, 2010, 199(45-48), 3005-3027, DOI: 10.1016/j.cma.2010.06.017 (Scopus)
[2] Canh V. Le, Nguyen-Xuan H., Askes H., Bordas S., Rabczuk T., Nguyen-Vinh H.: A cell based smoothed finite element method for kinematic limit analysis, International Journal for Numerical Methods in Engineering, 2010, 83(12), 1651-1674, DOI: 10.1002/nme.2897 (Scopus)
[3] Le Phong B.E., Rabczuk T., Mai-Duy Nam, Tran-Cong Thanh: A Moving Local IRBFN based Galerkin meshless method, CMES-Computer Modeling in Engineering and Sciences, 2010, 66(1), 25-52 (Scopus)
[4] Akbari, A., Bagri, R., Bordas S.P.A., Rabczuk T.: Analysis of thermoelastic waves in a two-dimensional functionally graded materials domain by the Meshless Local Petrov Galerkin (MLPG) method, CMES-Computer Modeling in Engineering and Sciences, 2010, 65(1), 27-74 (Scopus)
[5] Rabczuk T., Bordas S., Zi G.: On three-dimensional modelling of crack growth using partition of unity methods, Computers & Structures, 2010, 88(23-24), 1391-1411 (invited), DOI: 10.1016/j.compstruc.2008.08.010 (Scopus)
[6] Bordas S., Rabczuk T., Nguyen-Xuan H., S. Natarajan, T. Bog, Nguyen. V. P., Q. Do Minh, H. Nguyen Vinh: Strain Smoothing in FEM and XFEM, Computers & Structures, 2010, 88(23-24), 1419-1443 (invited), DOI: 10.1016/j.compstruc.2008.07.006 (Scopus)
[7] Hann C.E., Hewett D., Chase J.G., Rabczuk T., Sundaresan A., Chen X., Wang W., Shaw G.M.: Image-based measurement of alveoli volume expansion in an animal model of a diseased lung, International Journal of Computer Applications in Technology, 2010, 39(1-3), 58-65, DOI: 10.1504/IJCAT.2010.034731 (Scopus)
[8] Le Phong B.E., Rabczuk T., Mai-Duy Nam, Tran-Cong Thanh: A Moving IRBFN based integration-free meshless method, CMES-Computer Modeling in Engineering and Sciences, 2010, 61(1), 63-109 (Scopus)
[9] Nguyen-Xuan H., Rabczuk T., Nguyen-Thanh N., Nguyen-Thoi T., Bordas S.: A node-based smoothed finite element method (NS-FEM) with stabilized discrete shear gap technique for analysis of Reissner-Mindlin plates, Computational Mechanics, 2010, 46(5), 679-701, DOI: 10.1007/s00466-010-0509-x (Scopus)
[10] Rabczuk T., Zi G., Bordas S., Nguyen-Xuan H.: A simple and robust three-dimensional cracking-particle method without enrichment, Computer Methods in Applied Mechanics and Engineering, 2010, 199(37-40), 2437-2455, DOI: 10.1016/j.cma.2010.03.031 (Scopus)
[12] Nguyen-Thanh N., Rabczuk T., Nguyen-Xuan H., Bordas S.: An alternative alpha finite element method (A”FEM) free and forced vibration analysis of solids using triangular meshes, Journal of Computational and Applied Mathematics, 2010, 233(9), 2112-2135, DOI: 10.1016/j.cam.2009.08.117 (Scopus)
[13] Rabczuk T., Gracie R., Song J.H., Belytschko T.: Immersed particle method for fluid-structure interaction, International Journal for Numerical Methods in Engineering, 2010, 81(1), 48-71, DOI: 10.1002/nme.2670 (Scopus)
[14] Areias P.M.A, Rabczuk T.: Smooth finite strain plasticity with nonlocal pressure support, International Journal for Numerical Methods in Engineering, 2010, 81(1), 106-134, DOI: 10.1002/nme.2686 (Scopus)
2009
[1] Rabczuk T., Song J.H., Belytschko T.: Simulations of Instability in Dynamic Fracture by the Cracking Particles Method, Engineering Fracture Mechanics, 2009, 76(6), 730-741, DOI: 10.1016/j.engfracmech.2008.06.002 (Scopus)
2008
[1] Natarajan, S., Bordas, S., Minh, Q.D., Nguyen, H.X., Rabczuk, T., Cahill, L., McCarthy, C.: The smoothed extended finite element method, 2008, Proceedings of the 6th International Conference on Engineering Computational Technology, 15 p.(Scopus)
[2] Rabczuk T., Zi G., Bordas S., Nguyen-Xuan H.: A geometrically non-linear three dimensional cohesive crack method for reinforced concrete structures, Engineering Fracture Mechanics, 2008, 75(16), 4740-4758, DOI: 10.1016/j.engfracmech.2008.06.019 (Scopus)
[3] Nguyen-Thanh N., Rabczuk T., Nguyen-Xuan H., Bordas S.: A smoothed finite element method for shell analysis, Computer Methods in Applied Mechanics and Engineering, 2008, 198(2), 165-177, DOI: 10.1016/j.cma.2008.05.029 (Scopus)
[4] Rabczuk T., Zi G., Gerstenberger A., Wall W.A.: A new crack tip element for the phantom node method with arbitrary cohesive cracks, International Journal for Numerical Methods in Engineering, 2008, 75(5), 577-599, DOI: 10.1002/nme.2273 (Scopus)
[5] Nguyen-Xuan H., Rabczuk T., Bordas S., Debongnie J.F.: A smoothed finite element method for plate analysis, Computer Methods in Applied Mechanics and Engineering, 2008, 197(13-16), 1184- 1203, DOI: 10.1016/j.cma.2007.10.008 (Scopus)
[6] Wall W.A., Rabczuk T.: Fluid-Structure Interaction in lower airways of CT-based lung geometries, International Journal for Numerical Methods in Fluids, 2008, 57(5), 653-675 (invited)
[7] Rabczuk, T., Bezensek, B., Bordas, S.: Application of extended element-free Galerkin method to multiple flaws under brittle fracture conditions, 2008, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 6 (PARTS A AND B), pp. 1079-1084, DOI: 10.1115/PVP2008-61550 (Scopus)
[8] Bordas, S., Rabczuk T., Zi. G.: Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by extrinsic discontinuous enrichment of meshfree methods without asymptotic enrichment, Engineering Fracture Mechanics, 2008, 75(5), 943-960, DOI: 10.1016/j.engfracmech.2007.05.010 (Scopus)
[9] Areias P.M.A., Rabczuk T.: Quasi-static crack propagation in plane and plate structures using set-valued traction-separation laws, International Journal for Numerical Methods in Engineering, 2008, 74(3), 475-505, DOI: 10.1002/nme.2182 (Scopus)
[10] Rabczuk T., Samaniego E.: Discontinuous modelling of shear bands using adaptive meshfree methods, Computer Methods in Applied Mechanics and Engineering, 2008, 197(6-8), 641-658, DOI: 10.1016/j.cma.2007.08.027 (Scopus)
[11] Rabczuk T., Zi G.: Numerical Fracture Analysis of prestressed concrete beams, International Journal of Concrete Structures and Materials, 2008, 2(2)
[12] Nguyen V.P., Rabczuk T., Bordas S. Duflot M.: Meshless methods: A review and computer implementation aspects, Mathematics and Computers in Simulation, 2008, 79, 763-813, DOI: 10.1016/j.matcom.2008.01.003 (Scopus)
[13] Wiechert, L., Rabczuk, T., Gee, M., Metzke, R., Wall, W.A.: Coupled problems in computational modeling of the respiratory system, 2008, High Performance Computing on Vector Systems 2007, pp. 145-166, DOI: 10.1007/978-3-540-74384-2_12 (Scopus)
2007
[14] Rabczuk T., Areias P.M.A., Belytschko T.: A meshfree thin shell method for non-linear dynamic fracture, International Journal for Numerical Methods in Engineering, 2007, 72(5), 524-548, DOI: 10.1002/nme.2013 (Scopus)
[15] Rabczuk T., Samaniego E., Belytschko T.: Simplified model for predicting impulsive loads on submerged structures to account for fluid-structure interaction, International Journal of Impact Engineering, 2007, 34(2), 163-177, DOI: 10.1016/j.ijimpeng.2005.08.012 (Scopus)
[16] Rabczuk T., Areias P.M.A., Belytschko T.: A simplified meshfree method for shear bands with cohesive surfaces, International Journal for Numerical Methods in Engineering, 2007, 69(5), 993-1021, DOI: 10.1002/nme.1797 (Scopus)
[17] Plotzitza A., Rabczuk T., Eibl J.: Techniques for Numerical Simulations of Concrete Slabs for Demolishing by Blasting, Journal of Engineering Mechanics ASCE, 2007, 133(5), 523-533, DOI: 10.1061/(ASCE)0733-9399(2007)133:5(523) (Scopus)
[18] Rabczuk T., Zi G.: A meshfree method based on the local partition of unity for cohesive cracks, Computational Mechanics, 2007, 39(6), 743-760, DOI: 10.1007/s00466-006-0067-4 (Scopus)
[19] Rabczuk T., Belytschko T.: A three dimensional large deformation meshfree method for arbitrary evolving cracks, Computer Methods in Applied Mechanics and Engineering, 2007, 196(29-30), 2777-2799, DOI: 10.1016/j.cma.2006.06.020 (Scopus)
[20] Zi G., Rabczuk T., Wall W.A.: Extended Meshfree Methods without Branch Enrichment for Cohesive Cracks, Computational Mechanics, 2007, 40(2), 367-382, DOI: 10.1007/s00466-006-0115-0, (Scopus)
[21] Rabczuk T., Bordas S., Zi G.: A three-dimensional meshfree method for continuous multiplecrack initiation, nucleation and propagation in statics and dynamics, Computational Mechanics, 2007, 40(3), 473-495, DOI: 10.1007/s00466-006-0122-1 (Scopus)
[22] Bordas, S., Zi, G., Rabczuk, T.: Three-dimensional non-linear fracture mechanics by enriched meshfree methods without asymptotic enrichment, 2007, Solid Mechanics and its Applications, 5, pp. 21-36, DOI: 10.1007/978-1-4020-6530-9_2 (Scopus)
2006
[1] Rabczuk T., Eibl J.: Modeling dynamic failure of concrete with meshfree particle methods, International Journal of Impact Engineering, 2006, 32 (11), 1878-1897, DOI: 10.1016/j.ijimpeng.2005.02.008 (Scopus)
[2] Rabczuk T., Belytschko T.: Application of particle methods to static fracture of reinforced concrete structures, International Journal of Fracture, 2006, 137(1-4), 19-49, DOI: 10.1007/s10704-005-3075-z (Scopus)
[3] Rabczuk T., Areias P.M.A.: A new approach for modelling slip lines in geological materials with cohesive models, International Journal for Numerical and Analytical Methods in Engineering, 2006, 30(11), 1159-1172, DOI: 10.1002/nag.522 (Scopus)
[4] Rabczuk T., Xiao S.P., Sauer M.: Coupling of meshfree methods with finite elements: Basic concepts and test results, Communications in Numerical Methods in Engineering, 2006, 22(10), 1031-1065, DOI: 10.1002/cnm.871 (Scopus)
[5] Rabczuk T., Areias P.M.A.: A meshfree thin shell for arbitrary evolving cracks based on an external enrichment, CMES-Computer Modeling in Engineering and Sciences, 2006, 16(2), 115-130 (Scopus)
2005
[1] Rabczuk T., Akkermann J., Eibl J.: A numerical model for reinforced concrete structures, International Journal of Solids and Structures, 2005, 42(5-6), 1327-1354, DOI: 10.1016/j.ijsolstr.2004.07.019 (Scopus)
[2] Rabczuk T., Belytschko T.: Adaptivity for structured meshfree particle methods in 2D and 3D, International Journal for Numerical Methods in Engineering, 2005, 63(11), 1559-1582, DOI: 10.1002/nme.1326 (Scopus)
2004
[1] Rabczuk T., Eibl J., Stempniewski L.: Numerical analysis of high speed concrete fragmentation using a meshfree Lagrangian method, Engineering Fracture Mechanics, 2004, 71, 547-556, DOI: 10.1016/S0013-7944(03)00032-8 (Scopus)
[2] Rabczuk T., Eibl J.: Numerical analysis of prestressed concrete beams using a coupled element free Galerkin/finite element approach, International Journal of Solids and Structures, 2004, 41 (3- 4), 1061-1080, DOI: 10.1016/j.ijsolstr.2003.09.040 (Scopus)
[3] Rabczuk T., Belytschko T., Xiao S.P.: Stable particle methods based on Lagrangian kernels, Computer Methods in Applied Mechanics and Engineering, 2004, 193(12-14), 1035-1063, DOI: 10.1016/j.cma.2003.12.005 (Scopus)
[4] Rabczuk T., Eibl J., Stempniewski L.: Simulation of high velocity concrete fragmentation using SPH/MLSPH, International Journal for Numerical Methods in Engineering, 2003, 56(10), 1421-1444, DOI: 10.1002/nme.617 (Scopus)
[5] Rabczuk, T., Kim, J.Y., Samaniego, E., Belytschko, T.: Homogenization of sandwich structures, 2004, International Journal for Numerical Methods in Engineering, 61 (7), pp. 1009-1027, DOI: 10.1002/nme.1100 (Scopus)
[6] Rabczuk, T., Belytschko, T.: Cracking particles: A simplified meshfree method for arbitrary evolving cracks, 2004, International Journal for Numerical Methods in Engineering, 61 (13), pp. 2316-2343, DOI: 10.1002/nme.1151 (Scopus)
Invited Publications in peer-reviewed National or Non-ISI Journals
[1] Tran T., Zhuang X., Rabczuk T.: Numerical study for cohesive zone model in delamination analysis based on higher-order B-spline functions, Journal of Micromechanics and Molecular Physics, 2017, in press.
[2] Ren H., Zhuang X., Rabczuk T.: A new Peridynamic formulation with shear deformation for elastic solid, Journal of Micromechanics and Molecular Physics, 2016, 1(2), article number: 1650009, DOI: 10.1142/S2424913016500090.
[3] Shirazi A.H.N., Kakavand M.R.A., He B., Rabczuk T.: Numerical Study of Composite Electrode’s Particle Size Effect on the Electrochemical and Heat Generation of a Li-ion Battery, ASME Journal of Nanotechnology in Engineering and Medicine, in press
[4] Nguyen-Xuan H., Rabczuk T. Adaptive selective ES-FEM limit analysis of cracked plane-strain structures, Frontiers of Structural and Civil Engineering, in press
[5] Akbar A.B.I., Kramer O., Rabczuk T.: Multi-Objective Evolutionary Optimization of Sandwich Structures: An Evaluation by Elitist Non-dominated Sorting Evolution Strategy, American Journal of Engineering and Applied Sciences, in press
[6] Rabczuk T.: Computational Methods for Fracture in Brittle and Quasi-Brittle Solids: State-of-the-art Review and Future Perspectives, ISRN Applied Mathematics, 2013, Article ID 849231, 38 pages, doi:10.1155/2013/849231 (Scopus)
[7] Nguyen-Thoi T., Luong-Van H., Phung-Van P., Rabczuk T., Tran-Trung D.: Dynamic Responses of Composite Plates on the Pasternak Foundation Subjected to a Moving Mass by a Cell-based Smoothed Discrete Shear Gap (CS-FEM-DSG3) Method, International Journal of Composite Materials, 2013, 3(6A), 19-27
[8] Kalameh H.A., Karamali A., Anitescu C. Rabczuk T.: High velocity impact of metal sphere on thin metallic plate using smooth particle hydrodynamics (SPH) method, Frontiers of Structural and Civil Engineering, 2012, 6(2), 101-110, DOI: 10.1007/s11709-012-0160-z (Scopus)
[9] Dunant C.F., Bordas S.P.A., Kerfriden P., Scrivener K.L., Rabczuk T.: An algorithm to compute damage from load in composites, Frontiers of Architecture and Civil Engineering in China, 2011, 5(2), 180-193, DOI: 10.1007/s11709-011-0107-9 (Scopus)
[10] Nguyen-Thanh N, Thai-Hoang C, Nguyen-Xuan H, Rabczuk T: A smoothed finite element method for the static and free vibration analysis of shells, Journal of Civil Engineering and Architecture, 2010, 4(34), 13-25
[11] Eibl J., Rabczuk T.: Untersuchungen zum Fragmentierungsverhalten von Beton mit Hilfe der SPH/MLSPH-Methode, Bauingenieur, 2004, 11, 522-527
[12] Rabczuk T., Belytschko T.: An adaptive continuum/discrete crack approach for meshfree particle methods, Latin American Journal of Solids and Structures, 2003, 1(1), 141-166 (Scopus)
Lecture Notes
[1] Rabczuk T.: Extended Finite Element and Meshfree Methods, 2006 www.uni-weimar.de/cms/bauing/forschung/institute/ism/lehre/xfem-mfm.html PhD-thesis
[2] Rabczuk T.: Numerical analysis of concrete fragmentation using SPH (Numerische Untersuchungen zum Fragmentierungsverhalten von Beton mit Hilfe der SPH-Methode), Dissertation, Januar 2002, Institut für Massibau und Baustofftechnologie, Heft 45, University of Karlsruhe (http://www.ubka.uni-karlsruhe.de/cgi-bin/psview?document=2002/bau-verm/2)