Sebastian Wolf/Birth: Difference between revisions

From Medien Wiki
mNo edit summary
mNo edit summary
Line 35: Line 35:
<videoflash type=vimeo>24438729|900|338</videoflash>
<videoflash type=vimeo>24438729|900|338</videoflash>
<br clear="all" />
<br clear="all" />
''An "infinite" number of people can look at the installation simultaneously since the projection surface is around 5.6x2 meters in size. The projected resolution is 2048x768 pixels. Animations were made in Maxon Cinema4d & Adobe After Effects. Quartz Composer then modifies these animations in realtime according to sensor data it receives via [[OSC]]. [[Sensors]] are connected to the computer through an [[Arduino]] Microcontroller that sends serial data to a lightweight [[Processing]] sketch which converts them to OSC signals. Because OSC is used an additional feature is the controllability of the whole installation through an [[iPhone]] application. (or whatnot)''
''Other things that are needed to make it work are: a computer (min. 4x 3 ghz, good consumer graphics card, 8GB RAM), a dark space of about 6x4 squaremeters and a decent set of speakers.''


==== Szene 1 ====
==== Szene 1 ====

Revision as of 12:40, 8 June 2011

Birth // Julien Simshäuser, Claudia Symank, Sebastian Wolf

<videoflash type=vimeo>24518944|500|281</videoflash>


Birth - Interaktion mit einer neuen Welt.
Besucher der Installation sind in der Lage mit Hilfe eines textilen Interfaces mit einer neuen, ungewohnten Welt zu interagieren.
Wenn sie die Installation betreten, begeben sie sich damit in die Rolle eines Neugeborenen, das Dinge erforscht, die es nie zuvor gesehen hat.

Birth – Interaction with a new world.
Visitors are able to touch the conductive fabric or bend the Tentacles of Mega Joy to interact with the new world.
When entering the installation, people take the role of a newborn baby that interacts with things that it hasn't seen before.

Seite im Aufbau

Installation

Swbirthfull.jpg
Swbirthdetail.jpg


Skulptur/Interface

<videoflash type=vimeo>21927276|500|313</videoflash>


Bis zu drei Besucher können gemeinsam durch die Skulptur mit der Projektion in Interaktion treten.
Mit Hilfe der Sensorfläche aus elektrisch leitfähigem Textil im vorderen Bereich der Skulptur kann aus den verschiedenen Szenen gewählt werden. Die zwei Biegesensoren darüber ermöglichen es des Weiteren zusätzliche visuelle Welten zu entdecken.

Up to three people can interact with the sculpture at the same time to explore the projected world. The touch-sensitive surface – made from conductive fabric – enables them to choose from various scenes. You may explore additional visual worlds by bending the pair of flex sensors on top of the sculpture.

Projektion

<videoflash type=vimeo>24438729|900|338</videoflash>
An "infinite" number of people can look at the installation simultaneously since the projection surface is around 5.6x2 meters in size. The projected resolution is 2048x768 pixels. Animations were made in Maxon Cinema4d & Adobe After Effects. Quartz Composer then modifies these animations in realtime according to sensor data it receives via OSC. Sensors are connected to the computer through an Arduino Microcontroller that sends serial data to a lightweight Processing sketch which converts them to OSC signals. Because OSC is used an additional feature is the controllability of the whole installation through an iPhone application. (or whatnot)

Other things that are needed to make it work are: a computer (min. 4x 3 ghz, good consumer graphics card, 8GB RAM), a dark space of about 6x4 squaremeters and a decent set of speakers.

Szene 1

Swbirthprojection1.jpg
Flexibles Reh und Holzgestelle.

Szene 2

Swbirthprojection2.jpg


Szene 3

Swbirthprojection3.jpg
Atmende Kuckuksfelsen und Fähnchen.

Szene 4

Swbirthprojection4.jpg


Dank

Wir bedanken uns recht herzlich für die Unterstützung.

NEC Display Solutions

TITV Greiz