Lydia Kluge/Exercise1: Difference between revisions

From Medien Wiki
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
== Get That Soldering Done ==


'''Task'''
The task was to build a small circuit mainly in order to familiarise ourselves with a soldering iron.
'''Work'''
Tobias Wolf and I constructed a wooden display that either shows the number zero or the number one with the help of a drilled dot matrix and nine LEDs.
[[File:Led-zero-one-two-way-connection.gif|800px]]
To accomplish the change of the number we build a two-way connection; first we put one, two and two times three LEDs each in a series circuit and connected those in parallel. Next a resistor of 330 Ohm was used for the wiring with only one LED and a resistor of 220 Ohm for the one with two LEDs. That's slightly more resistance than needed but we assumed this wouldn't be a problem.
On top of this we improvised a toggle switch which connects the two LEDs either with the single LED to form the "1" or with the other six LEDs to form the "0".
[[File:Led-zero-one-two-way-connection-back.jpg|800px]]
[[File:Led-zero-one-two-way-connection-switch1.jpg|398px]]
[[File:Led-zero-one-two-way-connection-switch2.jpg|398px]]
'''Circuit Diagramm'''
[[File:Led-zero-one-two-way-connection-circuit.jpg|800px]]

Latest revision as of 23:09, 6 February 2014