IFD:Printing Acoustic Interfaces

From Medien Wiki
Revision as of 09:19, 21 May 2019 by Clemensw (talk | contribs)

Fachmodul
Printing Acoustic Interfaces
Instructor: Clemens Wegener
Credits: 6 ECTS, 2 SWS
Capacity: max. 12 students
Language: English
Location: Marienstrasse 7B, R002
First Meeting: 9th April 2019, 9:15 AM

Description

This course focuses on printing acoustic sensors for the sensing of structure-born sound. Print processes like silver ink-jet and screen printing can be applied to manufacture acoustic sensors. Tapping and sliding gestures on an acoustic surface have a different sound impact, which can be leveraged to design new interaction concepts. The course focuses on developing a concept for acoustic interaction and developing a working prototype with appropriate sensors and signal processing abilities to materialize your concepts.

Admission requirements

Knowledge in Hard- and Software would be highly appreciated, but is not a requirement.The needed functional components will be explained throughout the course. In parallel you will develope your own interaction concepts or product prototypes. For buying electronic components, a little budget of 10€ to 20€ is neccessary. Of course you can keep your manufactured works.

Evaluation

Successful completion of the course is dependent on regular attendance, active participation, completion of assignments, delivery of a relevant semester prototype and documentation. Please refer to the Evaluation Rubric for more details.

Eligible participants

Qualified MFA Medienkunst/-gestaltung, MFA Media Art and Design, MSc MediaArchitecture candidates

Syllabus (subject to change)

  • Session 1: Examples of acoustic interfaces
  • Session 2: Introduction to printed electronics workflow
  • Session 3: Brainstorm for project proposals
  • Session 4: Workshop: Printed electronics
  • Session 5: Introduction to the electronic workshop and tools
  • Session 6: Amplifier circuits and technology
  • Session 7: Prototyping Workshop 1
  • Session 8: Prototyping Workshop 2
  • Session 9: Connecting to Arduino or Raspberry Pi
  • Session 10: Audio signal processing in Pure Data 1
  • Session 11: Audio signal processing in Pure Data 2
  • Session XX: Final project presentations (9th July)

Course Material

Here you find learning material in the form of circuit simulations, that lead you to the understanding of amplifiers and other signal conditioning circuits that we use throughout the course. Feel free to experiment with them, they are editable and saved via the encoded URL. You cannot destroy them and it is easy to share edited versions.

  • The foundation of understanding electric circuits is Ohm's law.

Ohm's Law

  • A very powerful concept is the voltage divider, it allows us to attenuate (but not amplify!) any voltage in any circuit

voltage divider with even resistors

  • We will use the OpAmp (=operational amplifier) to amplify the small signals from our microphones to usable and less noisy signals before we digitize them in the computer

opamp as a comparator

stabilized opamp as a source follower

Inverting Opamp

Non-Inverting Opamp

555 Timer Oscillator

Further Reading

Suganuma, Katsuaki: Introduction to Printed Electronics. New York: Springer Science+Business Media, 2014.
Y. Kawahara, S. Hodges, N. Gong, S. Olberding and J. Steimle, "Building Functional Prototypes Using Conductive Inkjet Printing," in IEEE Pervasive Computing, vol. 13, no. 3, pp. 30-38, July-Sept. 2014.

Links

Inspiration for your prototpyes: