IFD:Eclectic Electric!/DocumentationWS2013: Difference between revisions

From Medien Wiki
mNo edit summary
mNo edit summary
Line 13: Line 13:
[[File:Jkmmbv_astabile_kippstufe_06.jpg|80px]]
[[File:Jkmmbv_astabile_kippstufe_06.jpg|80px]]


[[http://www.uni-weimar.de/medien/wiki/JonasKoehlerMartinMelcherBenjaminVo%C3%9Fler/Week1|The Astable Multivibrator In A Honey Jar]]
[[JonasKoehlerMartinMelcherBenjaminVoßler/Week1|The Astable Multivibrator In A Honey Jar]]


== Aidas==  
== Aidas==  

Revision as of 12:44, 12 November 2013

Max Mustermann

Max_Mustermann/Week1


John Doe

John_Doe/Week1

Lydia

Jonas Köhler / Martin Melcher / Benjamin Voßler

Jkmmbv astabile kippstufe 06.jpg

The Astable Multivibrator In A Honey Jar

Aidas

Jonas L.

Thomas

Julia

Adrian

Jonas_L_Aidas_Adrian/Week1

Stefanie

Laura

Natalia

Sebastian

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Rodrigo

Tobias

Somayeh

Clotilde

Heinrich

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Asu Ceren

Ives

Simon

Andre

Biters

Deniz

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Elahe