IFD:Eclectic Electric!/DocumentationWS2013: Difference between revisions

From Medien Wiki
Line 31: Line 31:
We used a piece of cardboard and pushed some holes with a needle in it to stabilize the LEDs before trying to solder everything together.  
We used a piece of cardboard and pushed some holes with a needle in it to stabilize the LEDs before trying to solder everything together.  


<gallery caption="The soldered circuit" widths="250px" heights="250px" perrow="1">
File:LED_Matrix_back_cut_small.jpg‎
File:LED_Matrix_front_cut_small.jpg‎
</gallery>


[NOTE: insert fotograph of actual circuit here]


The estimated build time for this circuit was three to four hours.
The estimated build time for this circuit was three to four hours.
----


== Stefanie==  
== Stefanie==  

Revision as of 13:28, 7 November 2013

Max Mustermann

Max_Mustermann/Week1


John Doe

John_Doe/Week1

Lydia

Martin

Aidas

Jonas L.

Thomas

Julia

Adrian

Exercise 1:

Today Jonas L., Aidas and I soldered our little LED-Exercise together.

At first we wanted to build a 2D Matrix out of the LEDs with separate buttons for every Light, but we decided to just handle every line of five LEDs separately in order to save some resistors and buttons.



We took 25 bright white LEDs and put them soldered them to our wires in parallel together with a 330 Ohm Resistor and a Push-Button for each set of five LEDs.

We used a piece of cardboard and pushed some holes with a needle in it to stabilize the LEDs before trying to solder everything together.


The estimated build time for this circuit was three to four hours.


Stefanie

Laura

Natalia

Sebastian

Rodrigo

Tobias

Somayeh

Clotilde

Benjamin

Jonas K.

Heinrich

Asu Ceren

Ives

Simon

Andre

Biters

Deniz

Elahe