IFD:Eclectic Electric!/DocumentationWS2013: Difference between revisions

From Medien Wiki
Line 10: Line 10:
== Lydia ==
== Lydia ==


Have a look at the [[Lydia_Kluge|work]] I did during this class.
'''First Weeks Assigment.'''
:[[Lydia_Kluge/Exercise1|1. Get That Soldering Done]]
 
 
'''Second Exercise.'''
:[[Lydia_Kluge/Exercise2|2. Simply Sound]]
 
 
'''Woven and Sewn.'''
:[[Lydia_Kluge/Exercise2|3. Call Me Calavera de Dulce]]


== Jonas Köhler / Martin Melcher / Benjamin Voßler ==
== Jonas Köhler / Martin Melcher / Benjamin Voßler ==

Revision as of 21:26, 6 February 2014

Max Mustermann

Max_Mustermann/Week1


John Doe

John_Doe/Week1

Lydia

First Weeks Assigment.

1. Get That Soldering Done


Second Exercise.

2. Simply Sound


Woven and Sewn.

3. Call Me Calavera de Dulce

Jonas Köhler / Martin Melcher / Benjamin Voßler

Jkmmbv astabile kippstufe 06.jpg

The Astable Multivibrator In A Honey Jar

Aidas

Jonas L.

Thomas

Julia

Adrian

Jonas_L_Aidas_Adrian/Week1

Stefanie

Laura

Natalia

Sebastian

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Homework = we were asked to hack or modify a simple sound recorder, by changing the resistor.

I melted off the resistor on the board. I then added a Light Depending Resistor. I also added connector ports to the other cables so that it can be changed more often with more ease. Images of the modification below.

Sound mod 1.jpg

Sound mod 2.jpg

Sound mod 3.jpg

So now, depending on how much light the LDR receives, the sound that you record with the device will be processed slower (Less light) or faster (more light) resulting in a slow and fast playback which includes pitch change.

Rodrigo

Tobias

Somayeh

Clotilde

Heinrich

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Asu Ceren

Ives

Simon

Andre

Biters

Deniz

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

LightdendandentLeds.JPG Curcuitdiagram.JPG

Elahe