IFD:EAI SoS21/course material/Session 6: Getting Started with Teensyduino: Difference between revisions

From Medien Wiki
No edit summary
No edit summary
Line 3: Line 3:
# Installl Arduino IDE and Teensyduino: https://www.pjrc.com/teensy/td_download.html
# Installl Arduino IDE and Teensyduino: https://www.pjrc.com/teensy/td_download.html
# Open and program the example patch [[File:test_patch.png|thumb|690px|opening the example test patch]]
# Open and program the example patch [[File:test_patch.png|thumb|690px|opening the example test patch]]
# Connect some headphones on the audio shields headphone out and listen! You should be able to hear a sine wave switching amplitudes.<br /><br />
# Connect some headphones on the audio shields headphone out and listen! You should be able to hear a sine wave switching amplitudes.<br /><br />If you are having problems connecting your teensies :(  
If you are having problems connecting your teensies :(  
read through the following sections:
read through the following sections:
* https://www.pjrc.com/teensy/troubleshoot.html<br /><br />
* https://www.pjrc.com/teensy/troubleshoot.html<br /><br />

Revision as of 16:29, 25 May 2021

After you soldered your headers and mics, it's time to try and get some sound in and output from your teensy devices! Here is a short how-to, partially summarizing what we did in the last online session.

  1. Installl Arduino IDE and Teensyduino: https://www.pjrc.com/teensy/td_download.html
  2. Open and program the example patch
    opening the example test patch
  3. Connect some headphones on the audio shields headphone out and listen! You should be able to hear a sine wave switching amplitudes.

    If you are having problems connecting your teensies :(

read through the following sections:

  1. check out the teensy web ide patches: https://www.pjrc.com/teensy/gui/
    • add the following nodes from the gui:
      1. from "input" add "i2s"
      2. from "output" add "i2s"
      3. from "control" add "sgtl5000"
        Audio System Design Tool "Audio through patch"
  2. Click the export button to generate the setup code for your teensy and paste it in your Arduino IDE patch!
  3. In the setup routine of the arduino IDE you need code to choose the microphone port and audio levels. It should look more or less like this:
    void setup() {
      // Audio connections require memory to work.  For more
      // detailed information, see the MemoryAndCpuUsage example
      AudioMemory(8);
      // Enable the audio shield and set the output volume.
     
      sgtl5000_1.enable();
      sgtl5000_1.inputSelect(AUDIO_INPUT_MIC);
      sgtl5000_1.micGain(36); //from 0dB 40dB
      sgtl5000_1.volume(0.8); // from 0.0 to 1.0 // 0.8 standard
    }
  4. Fingers crosses, press upload and compile the patch!

Now put some headphones on the teensy headphone connector and hopefully listen to some interesting piezo disc microphonic sounds (this is where the word micro-phone really comes from, it's analogous to microscope actually).