(Created page with "=Video Wall Signal input= There are three ways to get a signal into the Video Wall * Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "A...")
 
(Video Wall Signal input)
Line 7: Line 7:
  
 
The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.
 
The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.
 +
 
'''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)'''
 
'''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)'''

Revision as of 11:27, 20 February 2017

Video Wall Signal input

There are three ways to get a signal into the Video Wall

  • Using the video splitter module "Datapath" (DVI[[Standards/Video|Digital Visual Interface]], connected to the Graphics Workstation "Ariadne" on the right side of the right table)
  • Using the "Daisychain" input (Displayport, connected to Sound Workstation "Enigma" on the left side of the right table)
  • Using the RasPis (Distributed on the back of the wall

The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.

The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)