GMU:Tutorials/Performance Platform/Video Wall Signal Input: Difference between revisions

From Medien Wiki
 
(One intermediate revision by the same user not shown)
Line 11: Line 11:


<gallery>
<gallery>
File:Videowall Ansteuerung.jpg
File:Videowall Ansteuerung.jpg | Videowall Control
File:Videowall Ansteuerung DVI.jpg
File:Videowall Ansteuerung DVI.jpg | Videowall Control DVI
</gallery>
</gallery>


PDF versions:
PDF versions:
*[[File:Videowall Ansteuerung.pdf]]
*[[File:Videowall Ansteuerung.pdf]]
*[[File:Videowall Ansteuerung DVI.jpg]]
*[[File:Videowall Ansteuerung DVI.pdf]]

Latest revision as of 14:05, 29 March 2017

Video Wall Signal input

There are three ways to get a signal into the Video Wall

  • Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "Ariadne" on the right side of the right table)
  • Using the "Daisychain" input (Displayport, connected to Sound Workstation "Enigma" on the left side of the right table)
  • Using the RasPis (Distributed on the back of the wall

The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.

The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)

PDF versions: