GMU:Tutorials/Performance Platform/Sound System Stereo: Difference between revisions

From Medien Wiki
 
(17 intermediate revisions by the same user not shown)
Line 13: Line 13:
For more images see [[GMU:Tutorials/Performance_Platform/Sound_System_Stereo#Gallery| Gallery]] bellow
For more images see [[GMU:Tutorials/Performance_Platform/Sound_System_Stereo#Gallery| Gallery]] bellow
== Components ==
== Components ==
=== Audio-Workstation ===
* Audio-Workstation (Enigma; Mac-Pro on the left side of the right table)
 
* Audio-Interface [https://www.rme-audio.de/products/fireface_ufx.php RME Fireface UFX]
* Enigma (Mac-Pro on the left side of the right table)
* Audio-Interface [https://www.rme-audio.de/products/fireface_800.php RME Fireface 800]
 
=== Audio-Interfaces ===
* [https://www.rme-audio.de/products/fireface_ufx.php RME Fireface UFX]
* [https://www.rme-audio.de/products/fireface_ufx_800.php RME Fireface 800]
 
=== Speakers ===
 
==== Stereo Speakers ====
 
[[File:stereo speaker.JPG | thumb | left | right stereo speaker]]
 
<br style="clear:both">
 
* 2 Meyer Sound Speakers  
* 2 Meyer Sound Speakers  
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])


=== Cabling ===
<gallery>
File:dbl-grafik_4Kanal.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX and 800 front
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX and 800 back
File:stereo speaker.JPG | right stereo speaker
File:Subwoofer.JPG|Subwoofer
</gallery>


==== Multicore Stagebox (I) ====
== Using Stereo Sound System ==
* DREI/TEC stagebox for audio input
===Hardware===
 
Turn on equipment:
==== MPS-488 HP (I) ====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers
 
== Let's play Sound ==
===Step 0 Turn on equipment===
*Audio work station (Enigma)
*Audio work station (Enigma)
*Audiointerfaces (RME Fireface UFX and 800)
*Audiointerfaces (RME Fireface UFX and 800)
*Power supply (488 back room, next to the video wall)
*Power supply (488 back room, next to the video wall)
*Check if the USB cable connected (Work station to Fireface UFX)
*Check if the USB cable connected (Work station to Fireface UFX)
====Software (TotalMix FX)====
Mixer view (key M)
*TotalMix FX
* Mismatch detected Error? click "no"
*If you want to play stereo select Fireface UFX (top right corner of the program; alternatively Workspace quick select (key W) and select stereo preset): The top stripe stands for hardware inputs; The middle stripe of the virtual mixer stands for the audio inputs running on the work station; The bottom stripe stands for hardware outputs
*In order to select what the sound output is, select on the mac interface top right sound icon
* on the bottom stripe bottom right is the sound master output control
Not sure if how the system is mapped? go to Matrix view for debugging (key X) and map input-output channels


p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users.<br>
<gallery>
<gallery>
File:stereo-matrix-software-input-to-hardware-output.png |matrix-software-input-to-hardware-output
File:power supplier.jpg|Power supply
File:stereo-mixer-view.png |mixer-view
File:power1.png|Power supply
File:stereo-select-output-device.png |select-output-device
File:backpower2.png|Power supply
File:stereo-totalmix-select-audio-device-fireface-ufx.png |totalmix-select-audio-device-fireface-ufx
File:audiointerface2.png|Fireface UFX & Fireface 800
File:stereo-workspace-quickselect-1.png |workspace-quickselect
File:macpro2.png|Mac Pro workstation
File:stereo-workspace-quickselect-2.png |workspace-quickselect
File:totalmix-error-message.png |totalmix-error-message
</gallery>
</gallery>
===Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player===
[[File:Sound Cable.jpg|thumb|left|400px]]
<br style="clear:both">
<br style="clear:both">
===Software===
====TotalMix====
For signal manage and post-mix. Stereo playing is Channel 1/2


===Step 2- Turn on 『Power supplier for multiple speakers===
<gallery>
The power supplier is located behind the right sight of video wall.
File:Mixing2.png|TotalMix
 
File:phones2.png|Phones output 11/12(extra monitor using)
[[Image:power supplier.jpg|thumb|center|900px]]
File:mainout2.png|Master output (What we use!)
 
File:Adat2.png|ADAT output 13/14(Only for digital Optical system)
[[File:power1.png|thumb|left|225px |power supplier]]
File:main out.jpg|press the Volume knob to switch between the different modes, and spin it to adjust the volume
[[File:backpower2.png|thumb|left|250px|power supplier]]
</gallery>
<br style="clear:both">
 
'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro  』.'''<br>


[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
== Using Stereo Sound System from laptop==
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In case if giving a try:
<br style="clear:both">
* Download [https://www.rme-audio.de/downloads/driver/fireface.php Drivers for the Fireface 800]
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users.<br>
 
'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800]<br>
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
<br style="clear:both">
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
<br style="clear:both">
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
<br style="clear:both">
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
<br style="clear:both">
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
<br style="clear:both">


== Trouble shooting ==
==Trouble shooting ==


Situation 1: You've already plug in sound cable but nothing happened?
Situation 1: You've already plug in sound cable but nothing happened?
Line 126: Line 80:
<gallery>
<gallery>
File:DBL_Sound.jpg|Sound system scheme
File:DBL_Sound.jpg|Sound system scheme
File:sound system connection sketch.jpg | sound system connection sketch
File:dbl-grafik_4Kanal.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX and 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX and 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox

Latest revision as of 18:06, 19 February 2017

There are two independent sound systems. The stereo sound system and the surround sound systems. Both are controlled by the same audio work station.


Connection Diagram

Here is an overview of how the components are connected:

stereo system


For more images see Gallery bellow

Components

Using Stereo Sound System

Hardware

Turn on equipment:

  • Audio work station (Enigma)
  • Audiointerfaces (RME Fireface UFX and 800)
  • Power supply (488 back room, next to the video wall)
  • Check if the USB cable connected (Work station to Fireface UFX)

p.s.Make sure following the ordering of first turn on power supplier then audio interface, but turn off audio interface at first then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users.


Software

TotalMix

For signal manage and post-mix. Stereo playing is Channel 1/2

Using Stereo Sound System from laptop

For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In case if giving a try:

Trouble shooting

Situation 1: You've already plug in sound cable but nothing happened?

Answer:

  • Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
  • Check if you have already turned on the Fireface UFX and Fireface 800.

Situation 2: All are truned on but still no sound?

Answer:

  • Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
  • Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
  • Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

Gallery