GMU:PCB Arts/Ulrike Katzschmann: Difference between revisions

From Medien Wiki
No edit summary
mNo edit summary
Line 1: Line 1:
== '''Semesterproject''' ==
=== "Police Car Badge" ===
'''Idea:'''
The first time I came into contact with the topic of PCB Arts was through this module. Before i knew what PCBs were and how they are normaly used but I did not know about this large community that uses this medium in an artistical way. What really fasciated me is that there is a big part of this community that is just dedicated on making PCB badges. So for my final project I created such a badge.
The whole design of the PCB is based on the functionality of the first schematic I searched out to practise in Kicad with. Over my development time on this project, the schematic and with is the curcite, as well as the design have gone trough a few changes and adjustments.
The basic board design is made to look like an old school american police car. The main function of the curcite I used is to flash two LEDs alternately. This reminded me of a siren typically mounted on top of ambulances, firefightering vehicles and police cars. So this inspired me to design a PCB in the shape of a police car.
To make the board a bit more interessting i added four more LEDs, so that not only the sirens would flash but also the headlights of the car would light up.
'''Schematic and Curcuit:'''
----
Here are the links to some of the projects I showed you and a short documentary about the DEFCON 2018:
Here are the links to some of the projects I showed you and a short documentary about the DEFCON 2018:



Revision as of 13:33, 5 March 2021

Semesterproject

"Police Car Badge"

Idea:

The first time I came into contact with the topic of PCB Arts was through this module. Before i knew what PCBs were and how they are normaly used but I did not know about this large community that uses this medium in an artistical way. What really fasciated me is that there is a big part of this community that is just dedicated on making PCB badges. So for my final project I created such a badge. The whole design of the PCB is based on the functionality of the first schematic I searched out to practise in Kicad with. Over my development time on this project, the schematic and with is the curcite, as well as the design have gone trough a few changes and adjustments. The basic board design is made to look like an old school american police car. The main function of the curcite I used is to flash two LEDs alternately. This reminded me of a siren typically mounted on top of ambulances, firefightering vehicles and police cars. So this inspired me to design a PCB in the shape of a police car. To make the board a bit more interessting i added four more LEDs, so that not only the sirens would flash but also the headlights of the car would light up.


Schematic and Curcuit:



Here are the links to some of the projects I showed you and a short documentary about the DEFCON 2018: