(Preparing the Camera)
m
Line 1: Line 1:
 
== Miroscopy Stage Construction ==
 
== Miroscopy Stage Construction ==
[[File:MicroscopeCamera.jpg|200px|thumb|left|Wedge mechanism]]
+
[[File:MicroscopeCamera.jpg|200px|thumb|Wedge mechanism]]
 
Approach with 2 wedges. The aim was to find a simple mechanism that allows for high precision. If you tighten the screw the lower wedge moves left and pushes up the upper wedge with the camera on top of it. If you loosen the screw the camera moves down.   
 
Approach with 2 wedges. The aim was to find a simple mechanism that allows for high precision. If you tighten the screw the lower wedge moves left and pushes up the upper wedge with the camera on top of it. If you loosen the screw the camera moves down.   
 
Because of its simplicity it would be less susceptible to errors.
 
Because of its simplicity it would be less susceptible to errors.
 
+
<br clear="all" />
 
== Preparing the Camera ==
 
== Preparing the Camera ==
  
Line 24: Line 24:
  
 
== 3D Model ==
 
== 3D Model ==
[[File:Animation.gif|200px|thumb|left|3D Model]]
+
[[File:Animation.gif|200px|thumb|3D Model]]
 
You can download the model here: [[Media:ModelWedges.zip]]. You need to have Google SketchUp installed to open the model.
 
You can download the model here: [[Media:ModelWedges.zip]]. You need to have Google SketchUp installed to open the model.

Revision as of 13:06, 14 November 2012

Miroscopy Stage Construction

Wedge mechanism

Approach with 2 wedges. The aim was to find a simple mechanism that allows for high precision. If you tighten the screw the lower wedge moves left and pushes up the upper wedge with the camera on top of it. If you loosen the screw the camera moves down. Because of its simplicity it would be less susceptible to errors.

Preparing the Camera

First remove the lens of the camera. Use a screwdriver to unscrew the outer parts. Then use a hand saw or a pair of nippers to crack open the case around the cable. Carefully remove the plastic without damaging the cable. As a result you get the PCB with the cable and the LEDs. For now leave the black plastic ring on the PCB as a protection for the sensor.

The secound step is to remove the LEDs. Unsolder them carefully and clean the solder holes with a desoldering pump.

Cardboard Model

3D Model

3D Model

You can download the model here: Media:ModelWedges.zip. You need to have Google SketchUp installed to open the model.