Medien Wiki - User contributions [en]

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:41:55Z

Ms: /* Audio-Workstation */

= Stereo Sound System=

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

== Connection Diagram ==
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

== Gallery ==

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

== Components ==

'''TODO''': add labels to the photos

=== Audio-Workstation ===

* Enigma (Mac-Pro on the left side of the right table)

=== Audio-Interfaces ===

==== RME Fireface UFX ====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== Speakers ===

==== Stereo Speakers ====

[[File:stereo speaker.JPG | thumb | left | right stereo speaker]]

 

* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

=== Cabling ===

==== Multicore Stagebox (I) ====
* DREI/TEC stagebox for audio input

==== MPS-488 HP (I) ====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:41:42Z

Ms:

= Stereo Sound System=

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

== Connection Diagram ==
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

== Gallery ==

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

== Components ==

'''TODO''': add labels to the photos

=== Audio-Workstation ===

- Enigma (Mac-Pro on the left side of the right table)

=== Audio-Interfaces ===

==== RME Fireface UFX ====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== Speakers ===

==== Stereo Speakers ====

[[File:stereo speaker.JPG | thumb | left | right stereo speaker]]

 

* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

=== Cabling ===

==== Multicore Stagebox (I) ====
* DREI/TEC stagebox for audio input

==== MPS-488 HP (I) ====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:38:38Z

Ms:

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Gallery ===

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

=== Components ===

'''TODO''': add labels to the photos

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====

[[File:stereo speaker.JPG | thumb | left | right stereo speaker]]

 

* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:34:46Z

Ms:

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Gallery ===

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

=== Components ===

'''TODO''': add labels to the photos

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:34:15Z

Ms: /* Components */

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Components ===

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:33:18Z

Ms:

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Components ===

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:32:57Z

Ms: /* Introduction */

==Introduction==
you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Components ===

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:32:48Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

=== Connection Diagram ===
Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg |left|thumb|sound system connection sketch]]

 

=== Components ===

==== Audio-Workstation ====

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

==== Audio-Interfaces ====

===== RME Fireface UFX =====
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

==== Speakers ====

===== Stereo Speakers =====
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

==== Cabling ====

===== Multicore Stagebox (I) =====
* DREI/TEC stagebox for audio input

===== MPS-488 HP (I) =====
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:29:09Z

Ms: /* Stereo-Sound System */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

Here is an overview of how the components are connected:
[[File:sound system connection sketch.jpg | sound system connection sketch]]

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

== Speakers ==

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:28:40Z

Ms: /* Stereo-Sound System */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo-Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

Here is an overview of how the components are connected:
[File:sound system connection sketch.jpg | sound system connection sketch]

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

== Speakers ==

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:28:08Z

Ms: /* Stereo-Sound System */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo-Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

Here is an overview of how the components are connected:
File:sound system connection sketch.jpg | sound system connection sketch

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
File:stereo speaker.JPG | stereo speaker
File:multichanel speaker.JPG | multichanel speaker
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

== Speakers ==

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:26:17Z

Ms: /* Stereo Speakers */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo-Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound system connection sketch.jpg | sound system connection sketch
File:sound-station1.jpg | Enigma sound station cables
File:sound-station2.jpg | Enigma sound station cables
File:RME Fireface UFX und 800 back.JPG | RME Fireface UFX und 800 back
File:RME Fireface UFX und 800 front.JPG | RME Fireface UFX und 800 front
File:RME Fireface UFX und 800 power supply front.JPG | RME Fireface UFX und 800 power supply front
File:RME Fireface UFX und 800 to dreitec stagebox.JPG | RME Fireface UFX und 800 to dreitec stagebox
File:sound system power supply back.JPG | sound system power supply back
File:dreitec stagebox.JPG | dreitec stagebox
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

== Speakers ==

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers MM-10XP ([http://www.meyersound.de/product/mm-10/ product page])

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:16:25Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Stereo-Sound System==

There are two independent sound systems.
The stereo sound system and the surround sound systems.
Both are controlled by the same audio work station.

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound-station1.jpg | Enigma station cables
File:sound-station2.jpg | Enigma station cables
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

== Speakers ==

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:14:22Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound-station1.jpg | Enigma station cables
File:sound-station2.jpg | Enigma station cables
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
* [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

== Speakers ==

=== Surround Speakers ===
* 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Cabling ==

=== Multicore Stagebox (I) ===
* DREI/TEC stagebox for audio input

=== Multicore Stagebox (II) ===
* DREI/TEC stagebox for audio input

=== MPS-488 HP (I) ===
* Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:12:33Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound-station1.jpg | Enigma station cables
File:sound-station2.jpg | Enigma station cables
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
* [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

== Speakers ==

=== MPS-488 HP (I) ===
* Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
* 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:10:36Z

Ms: /* Audio-Workstation */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound-station1.jpg | Enigma station cables
File:sound-station2.jpg | Enigma station cables
</gallery>

'''TODO''': add labels to the photos

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
* [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

=== MPS-488 HP (I) ===
* Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
* 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:09:41Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

* Enigma (Mac-Pro on the left side of the right table)

<gallery>
File:sound-station1.jpg | Enigma station cables
File:sound-station2.jpg | Enigma station cables
</gallery>

== Audio-Interfaces ==

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
* [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

=== MPS-488 HP (I) ===
* Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
* 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:05:29Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

* Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==
<gallery>
File:sound-station1.jpg Enigma station cables
File:sound-station2.jpg Enigma station cables
</gallery>

=== RME Fireface UFX ===
* [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
* [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

=== MPS-488 HP (I) ===
* Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
* Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
* 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:04:37Z

Ms: /* Stereo Speakers */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==
<gallery>
File:sound-station1.jpg Enigma station cables
File:sound-station2.jpg Enigma station cables
</gallery>

=== RME Fireface UFX ===
- [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
- [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

=== MPS-488 HP (I) ===
- Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
- Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
- 8 ... Speakers

=== Stereo Speakers ===
* 2 Meyer Sound Speakers
* 2 Meyer Sound Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T11:04:04Z

Ms: /* RME Fireface 800 */

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==
<gallery>
File:sound-station1.jpg Enigma station cables
File:sound-station2.jpg Enigma station cables
</gallery>

=== RME Fireface UFX ===
- [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
- [https://www.rme-audio.de/products/fireface_800.php Fireface 800 Product Page]

=== MPS-488 HP (I) ===
- Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
- Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
- 8 ... Speakers

=== Stereo Speakers ===
- 2 ... Speakers
- 2 ... Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T10:57:02Z

Ms:

==Introduction==

you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==

=== RME Fireface UFX ===
- [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
- [https://www.rme-audio.de/products/fireface_800.php Fireface 800]

=== MPS-488 HP (I) ===
- Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
- Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
- 8 ... Speakers

=== Stereo Speakers ===
- 2 ... Speakers
- 2 ... Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T10:51:44Z

Ms: /* Audio-Interfaces */

==Instroduction==

In the Digital Lab you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==

=== RME Fireface UFX ===
- [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
- [https://www.rme-audio.de/products/fireface_800.php Fireface 800]

=== MPS-488 HP (I) ===
- Power supplier for 8 Surround-Speakers

=== MPS-488 HP (II) ===
- Power supplier for 2 Stereo Speakers and 2 Bass-Speakers

=== Surround Speakers ===
- 8 ... Speakers

=== Stereo Speakers ===
- 2 ... Speakers
- 2 ... Bass-Speakers

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T10:51:33Z

Ms: /* Audio-Interfaces */

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T10:46:56Z

Ms: /* Equipments you will use */

==Instroduction==

In the Digital Lab you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Audio-Workstation ==

- Enigma (Mac-Pro on the left side of the right table)

== Audio-Interfaces ==

=== RME Fireface UFX ===
- [https://www.rme-audio.de/products/fireface_ufx.php Fireface UFX Product Page]

=== RME Fireface 800 ===
- [https://www.rme-audio.de/products/fireface_800.php Fireface 800]

=== Power
*Power supplier for multiple speakers.
*Sound workstation(The most right Mac Pro).
*Last but the most important! Your sound player.

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Performance Platform/Sound System Stereo

2017-02-18T10:38:49Z

Ms: /* Circumstance Setting */

==Instroduction==

In the Digital Lab you could find two kind of sound playing system: 『'''Stereo Sound System』'''and '''『Multi-Channels Sound System』'''. In this case, I will introduce how to set up and playing your sound with Stereo sound system and some about trouble-shooting.

== Hardware Setup ==

There are totally four workstations in Digital Lab, and the right most one is used for dealing with sound playback.
Location is shown below:

[[Image:venuediagram.png|thumb|center|900px]]
 

== Equipments you will use ==
* RME Fireface UFX & Fireface 800 Audio Interface (Fireface UFX is a Audio Interface which support max. 30 signal inputs-outputs and 4Mics/Instrument and built-in preamps. To see more detail please visit the technical page.[https://www.rme-audio.de/products/fireface_ufx.php (RME Fireface UCX)].

*Power supplier for multiple speakers.
*Sound workstation(The most right Mac Pro).
*Last but the most important! Your sound player.

== Let's play the Sound ==
'''Step 1- Connect the 3.5 phone jack wire(already connected with workstation) to your sound player''' 
[[File:Sound Cable.jpg|thumb|left|400px]]
 

'''Step 2- Turn on 『Power supplier for multiple speakers』''' 
The power supplier is located behind the right sight of video wall.

[[Image:power supplier.jpg|thumb|center|900px]]

[[File:power1.png|thumb|left|225px |power supplier]]
[[File:backpower2.png|thumb|left|250px|power supplier]]
 

'''Step 3- Turn on 『RME Fireface UFX, FireFace 800 Audio Interface and the right side MacPro 』.''' 

[[Image:audiointerface2.png|thumb|left|350px|Fireface UFX & Fireface 800 ]]
[[File:macpro2.png|thumb|left|380px| Mac Pro workstation]]
 
p.s.Make sure following the ordering of first turn on power supplier then audio interface, but '''turn off audio interface at first''' then power supplier. If you break this rule, the electrical peak will harm the audio system. We believe that this definitely is a bad news for all users. 

'''Step 4- Setting up on RME Fireface UFX'''
(For those who only want to play stereo sound, they don’t need to download the drivers and control panel. In the other word, you will need to install them if you want to play multiple sound tracks.)
* Download link:[https://www.rme-audio.de/downloads/driver/fireface.php Fireface 800] 
Example of control panel:
TotalMix(For signal manage and post-mix. Stereo playing is Channel 1/2)
[[File:Mixing2.png|thumb|left|800px|TotalMix]]
 
- There are there main playback modes:
* Phones output 11/12(extra monitor using)
[[File:phones2.png|thumb|left|500px|phone output]]
 
* Main output('''What we use!''')
[[File:mainout2.png|thumb|left|500px|Master output]]
 
* ADAT output 13/14(Only for digital Optical system)
[[File:Adat2.png|thumb|left|500px|Adat optical ouput]]
 
- You could press the Volume knob to switch between the above three modes, and spin it to adjust the volume as you wish.
[[Image:main out.jpg|thumb|left|350px|Volume adjust]]
 

== Done!! Enjoy the Sound ==

== Trouble shooting ==

Situation 1: You've already plug in sound cable but nothing happened?

Answer:
* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
* Check if you have already turned on the Fireface UFX and Fireface 800. 

Situation 2: All are truned on but still no sound?

Answer:
* Check the Mac Pro and go to RME setting application(within the deck of desktop)to see if the sound card is selected to "Fireface 800" correctly.
* Open up the totalmix control panel, sending sound signal from your playing device, then check it there has signal in the stereo channal(Default is 1/2).
* Check if you have already chose the "Main out" as output mode correctly, and of course, volume up until you could listen somthing.

GMU:Tutorials/Documentation/Codepen-Howto

2016-11-16T18:42:14Z

Ms: /* Screenshots hosted at Codepen */

= Creating Links to Codepen =

You currently cannot embed codepens directly into the wiki. 
However it is quite easy to create a link to codepen with a preview image.

This tutorial shows to create previews that look like this (image link)

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

Or like this (thumbnail with link)

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

== Get the Slug ==

To embed a codepen you need its ''CODEPEN_SLUG'' which is a combination of letters and numbers. 
If your codepen is located at https://codepen.io/bitcraftlab/pen/MbjKNv the username is <code>bitcraftlab</code> and your slug is <code>MbjKNv</code>.

== Screenshots hosted at Codepen ==

With this slug you can retrieve screenshots provided by the codepen website. 
A small screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/small.png</nowiki></code>

A large screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/large.png</nowiki></code>

Let's say, your slug is <code>MbjKNv</code>. Then the small image can be found at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png</nowiki>] and the large one at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png</nowiki>].

=== Codepen Image Link ===

This is the simple and fast way to link to codepens.
If you know your codepen slug you can easily create a image link using the thumbnail hosted at codepen using this syntax:

<code><nowiki> [YOUR_CODEPEN_URL YOUR_THUMBNAIL_URL]</nowiki></code>

Let's say my username is ''bitcraftlab'' and I want to embed the codepen with the slug ''MbjKNv''.
Then the syntax goes like this:
<pre>[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]</pre>

This is what it looks like:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

=== Codepen Thumbnail with Link ===

You can also provide an actual thumbnail, with a link to the codepen.
This is more cumbersome, because you need to upload the screenshot to our wiki, but it sure looks nicer.

This is how you do it:

* Download the screenshot from codepen, or make one yourself
* Upload the screenshot to the wiki using the [[Special:Upload|Uploader]] at Wikipages > Uploads.
** Filename: use a unique image name, I suggest <code>codepen-CODEPEN_SLUG.png</code>
** License: (c) by the image uploader
** Source: url of your codepen

Once you have uploaded the screenshot, you can embed it like this:

<pre>[[File:codepen-CODEPEN_SLUG.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/CODEPEN_SLUG view on codepen]]]
</pre>

This is what it looks like in the wiki:

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

That's it.

Have fun!

GMU:Meandering through Space/Martin Schneider

2016-11-16T15:54:55Z

Ms: Created page with " This is just an example page :)"

This is just an example page :)

GMU:Meandering through Space

2016-11-16T15:54:30Z

Ms: remove deadline notes

[[Image:Meandering-through-space-teaser.png|thumb|left|300px|Martin Schneider: [https://github.com/bitcraftlab/meandering-code meandering code] (2014)]] 

'''Meandering through Space'''

[[:Category:Werkmodul|Werkmodul]]/[[:Category:Fachmodul|Fachmodul]] 
''Lecturer:'' [[Martin Schneider]] 
''Credits:'' 6 [[ECTS]], 4 [[SWS]] 
''Date:'' Thursday / Donnerstag 17:00 - 20:30 
''Venue:'' [[Performance Plattform]], Digital Bauhaus Lab (Raum 001) 
''First meeting:'' Donnerstag, 20. October, 2016 um 17:00 Uhr

 

== Participants ==

{{Note|Please create a subpage with your name and add a link below}}

* [[/Martin Schneider|Martin Schneider]]

== Beschreibung ==

Die Interaktion des Wassers mit geologischen Formationen führt zu geschlängelten und gewundenen Formen, die seit Urzeiten Vorbild sind für dekorative und mystische Gestaltung. Auch das Labyrinth, das um ein Zentrum meandert ist ein kulturelles Mem das seit Jahrtausenden kopiert und immer wieder neu interpretiert wird. Ob in ritueller Bewegung, im Tanz oder als Graffitti. In diesem Modul gehen wir den mäandernden Bewegungsspuren nach und erlernen die programmatische Gestaltung von raumfüllenden Kurven, Meandern und Labyrinthen. Am Ende des Moduls steht die kollaborative Gestaltung eines Meanders, das auf der Performance-Plattform aufgeführt werden soll.

Folgende Kenntnisse werden vermittelt:

* Programmieren mit Processing
* Steuerung der Videowall und des Sound-Systems der Peformance-Plattform
* Interfaces zur Aufzeichnung und Gestaltung von Trajektorien
* Kurven, Trajektorien und Bewegung im Raum
* Theorie und Praxis der Meander und Labyrinthe
* Programmierte Gestaltung von Linien und Kurven
* Raumfüllende Kurven und fraktale Mathematik
* Generative Systeme

Dieses Modul erfordert keine Programmierkentnisse.

Im Rahmen des Kurses werden grundlegende Programmierkentnisse vermittelt, die es ermöglichen in Zukunft fortgeschrittene Kurse zu belegen.

== Empfehlung ==

Das Modul wird in enger Zusammenarbeit mit der Professur Elektroakustische Komposition und Klanggestaltung und der Professur Experimentelles Radio veranstaltet.
Es wird empfohlen den Kurs mit "Sounds in Motion" (EKK) oder mit "Big Data / Archiv 2" (RADIO) zu kombinieren. Der Kurs richtet sich auch an Studierende der Medienwissenschaften, die das Seminar "Experimentalkulturen" und das Projekt-Modul "Experimente, Artefakte und ihre Performance" bei der Professur Gestaltung medialer Umgebungen belegen, sowie Studiernde der Medienarchitektur.

== Description ==

The interaction of water with geological formations leads to convoluted meandering forms, which have inspired decorative and ritual design practices since primeval times. The labyrinth, meandering around a central point is a cultural Meme that has been copied and reinterpreted for thousands of years, be it as ritual motion, dance or graffitti. In this module we are following the meandering trajectories and learn how to programmatically design curves, meanders and labyrinths. The module culminates in the collaborative design of a meander to be presented on the performance platform.

No programming skills required. This modules teaches basic programming skills which will enable you to visit advanved modules in the future.

== Language ==

The course will be in English, unless all participants are speaking German.

== Eligible Participants ==

Undergraduates and graduates enrolled in the faculties of D, M and A.

== Application ==

You can apply for this class via email. 
Make sure to use the email subject ''"Meandering through Space /// Application"'' and include all information listed below.

'''To:''' [[User:ms|Martin Schneider]] 
'''Subject:''' Meandering through Space /// Application 
'''Content:'''

# Name, Surname
# Your study program (including name of study + master or bachelor)
# Your study semester (as of SS 2016)
# matriculation number (Matrikelnummer)
# Valid email address @uni-weimar.de
# '''Provide a short and precise instruction that explains how to draw a curve that completely fills a page'''
# '''Follow your instruction and attach the resulting page as an image'''

== Schedule ==
{{note|'''Click the links to learn more about the topics of the course. 
The schedule may still be subject to change.
}}
{| class="wikitable"
|-
! Theme !! Topic !! Date
|-
| rowspan="3" | [[/Part1|Meandering Curves]]
| [[/Part1#Introduction|Introduction]]
| 20. Oct 2016
|-
| [[/Part1#Collaborative Drawing|Collaborative Drawing]]
| 27. Oct 2016
|-
| [[/Part1#Random Walks|Random Walks]]
| 03. Nov 2016
|-
| rowspan="4" | [[/Part2|Meandering Code]]
|-
| [[/Part2#From Code to Curves|From Code to Curves]]
| 10. Nov 2016
|-
| [[/Part2#Processing Curves|Processing Curves]]
| 17. Nov 2016
|-
| [[/Part2#Transforming Curves|Transforming Curves]]
| 24. Nov 2016
|-
| rowspan="5" | [[/Part3|Meandering Machines]]
|-
| [[/Part3#Braitenberg Vehicles|Braitenberg Vehicles]]
| 01. Dec 2016
|-
| [[/Part3#Drawing Homeostats|Drawing Homeostats]]
| 08. Dec 2016
|-
| [[/Part3#Reactive Curves|Reactive Curves]]
| 15. Dec 2016
|-
| [[/Part3#Swarm Based Curves|Swarm Based Curves]]
| 05. Jan 2017
|-
| rowspan="4" | [[/Part4|Meandering Media]]
|-
| [[/Part4#Meandering Sound|Meandering Sound]]
| 12. Jan 2017
|-
| [[/Part4#Meandering Video|Meandering Video]]
| 19. Jan 2017
|-
| [[/Part4#The Meandering Mind|The Meandering Mind]]
| 26. Jan 2017
|-
|}

== Evaluation ==
* 50 % Kursbegleitende Aufgaben, Experimente und Sketche
* 30 % Dokumentation (davon 10% Mitarbeit im Medien-Wiki)
* 20 % Kollaboratives Design (Meandering Bauhaus)

== Prerequisites ==
No previous rogramming skills required.

== Literature ==

* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Jeffrey Ventrella: [https://archive.org/stream/BrainfillingCurves-AFractalBestiary/BrainFilling Brain-Filling Curves] (2012)
* Braitenberg Valentino: ''Vehikel. Experimente mit kybernetischen Wesen'' (1993) — ISBN 978-3499195310

[[Category:WS16]]
[[Category:Werkmodul]]
[[Category:Fachmodul]]
[[Category:Martin Schneider]]
[[Category:Processing]]

GMU:Meandering through Space

2016-11-16T15:24:57Z

Ms: add participants section

[[Image:Meandering-through-space-teaser.png|thumb|left|300px|Martin Schneider: [https://github.com/bitcraftlab/meandering-code meandering code] (2014)]] 

'''Meandering through Space'''

[[:Category:Werkmodul|Werkmodul]]/[[:Category:Fachmodul|Fachmodul]] 
''Lecturer:'' [[Martin Schneider]] 
''Credits:'' 6 [[ECTS]], 4 [[SWS]] 
''Date:'' Thursday / Donnerstag 17:00 - 20:30 
''Venue:'' [[Performance Plattform]], Digital Bauhaus Lab (Raum 001) 
''First meeting:'' Donnerstag, 20. October, 2016 um 17:00 Uhr

 

{{note|'''Application deadline extended to October 15, 2016'''}}

== Participants ==

{{Note|Please create a subpage with your name and add a link below}}

* [[/Martin Schneider|Martin Schneider]]

== Beschreibung ==

Die Interaktion des Wassers mit geologischen Formationen führt zu geschlängelten und gewundenen Formen, die seit Urzeiten Vorbild sind für dekorative und mystische Gestaltung. Auch das Labyrinth, das um ein Zentrum meandert ist ein kulturelles Mem das seit Jahrtausenden kopiert und immer wieder neu interpretiert wird. Ob in ritueller Bewegung, im Tanz oder als Graffitti. In diesem Modul gehen wir den mäandernden Bewegungsspuren nach und erlernen die programmatische Gestaltung von raumfüllenden Kurven, Meandern und Labyrinthen. Am Ende des Moduls steht die kollaborative Gestaltung eines Meanders, das auf der Performance-Plattform aufgeführt werden soll.

Folgende Kenntnisse werden vermittelt:

* Programmieren mit Processing
* Steuerung der Videowall und des Sound-Systems der Peformance-Plattform
* Interfaces zur Aufzeichnung und Gestaltung von Trajektorien
* Kurven, Trajektorien und Bewegung im Raum
* Theorie und Praxis der Meander und Labyrinthe
* Programmierte Gestaltung von Linien und Kurven
* Raumfüllende Kurven und fraktale Mathematik
* Generative Systeme

Dieses Modul erfordert keine Programmierkentnisse.

Im Rahmen des Kurses werden grundlegende Programmierkentnisse vermittelt, die es ermöglichen in Zukunft fortgeschrittene Kurse zu belegen.

== Empfehlung ==

Das Modul wird in enger Zusammenarbeit mit der Professur Elektroakustische Komposition und Klanggestaltung und der Professur Experimentelles Radio veranstaltet.
Es wird empfohlen den Kurs mit "Sounds in Motion" (EKK) oder mit "Big Data / Archiv 2" (RADIO) zu kombinieren. Der Kurs richtet sich auch an Studierende der Medienwissenschaften, die das Seminar "Experimentalkulturen" und das Projekt-Modul "Experimente, Artefakte und ihre Performance" bei der Professur Gestaltung medialer Umgebungen belegen, sowie Studiernde der Medienarchitektur.

== Description ==

The interaction of water with geological formations leads to convoluted meandering forms, which have inspired decorative and ritual design practices since primeval times. The labyrinth, meandering around a central point is a cultural Meme that has been copied and reinterpreted for thousands of years, be it as ritual motion, dance or graffitti. In this module we are following the meandering trajectories and learn how to programmatically design curves, meanders and labyrinths. The module culminates in the collaborative design of a meander to be presented on the performance platform.

No programming skills required. This modules teaches basic programming skills which will enable you to visit advanved modules in the future.

== Language ==

The course will be in English, unless all participants are speaking German.

== Eligible Participants ==

Undergraduates and graduates enrolled in the faculties of D, M and A.

== Application ==

{{note|'''Application deadline extended to October 15, 2016'''}}

You can apply for this class via email. 
Make sure to use the email subject ''"Meandering through Space /// Application"'' and include all information listed below.

'''To:''' [[User:ms|Martin Schneider]] 
'''Subject:''' Meandering through Space /// Application 
'''Content:'''

# Name, Surname
# Your study program (including name of study + master or bachelor)
# Your study semester (as of SS 2016)
# matriculation number (Matrikelnummer)
# Valid email address @uni-weimar.de
# '''Provide a short and precise instruction that explains how to draw a curve that completely fills a page'''
# '''Follow your instruction and attach the resulting page as an image'''

== Schedule ==
{{note|'''Click the links to learn more about the topics of the course. 
The schedule may still be subject to change.
}}
{| class="wikitable"
|-
! Theme !! Topic !! Date
|-
| rowspan="3" | [[/Part1|Meandering Curves]]
| [[/Part1#Introduction|Introduction]]
| 20. Oct 2016
|-
| [[/Part1#Collaborative Drawing|Collaborative Drawing]]
| 27. Oct 2016
|-
| [[/Part1#Random Walks|Random Walks]]
| 03. Nov 2016
|-
| rowspan="4" | [[/Part2|Meandering Code]]
|-
| [[/Part2#From Code to Curves|From Code to Curves]]
| 10. Nov 2016
|-
| [[/Part2#Processing Curves|Processing Curves]]
| 17. Nov 2016
|-
| [[/Part2#Transforming Curves|Transforming Curves]]
| 24. Nov 2016
|-
| rowspan="5" | [[/Part3|Meandering Machines]]
|-
| [[/Part3#Braitenberg Vehicles|Braitenberg Vehicles]]
| 01. Dec 2016
|-
| [[/Part3#Drawing Homeostats|Drawing Homeostats]]
| 08. Dec 2016
|-
| [[/Part3#Reactive Curves|Reactive Curves]]
| 15. Dec 2016
|-
| [[/Part3#Swarm Based Curves|Swarm Based Curves]]
| 05. Jan 2017
|-
| rowspan="4" | [[/Part4|Meandering Media]]
|-
| [[/Part4#Meandering Sound|Meandering Sound]]
| 12. Jan 2017
|-
| [[/Part4#Meandering Video|Meandering Video]]
| 19. Jan 2017
|-
| [[/Part4#The Meandering Mind|The Meandering Mind]]
| 26. Jan 2017
|-
|}

== Evaluation ==
* 50 % Kursbegleitende Aufgaben, Experimente und Sketche
* 30 % Dokumentation (davon 10% Mitarbeit im Medien-Wiki)
* 20 % Kollaboratives Design (Meandering Bauhaus)

== Prerequisites ==
No previous rogramming skills required.

== Literature ==

* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Jeffrey Ventrella: [https://archive.org/stream/BrainfillingCurves-AFractalBestiary/BrainFilling Brain-Filling Curves] (2012)
* Braitenberg Valentino: ''Vehikel. Experimente mit kybernetischen Wesen'' (1993) — ISBN 978-3499195310

[[Category:WS16]]
[[Category:Werkmodul]]
[[Category:Fachmodul]]
[[Category:Martin Schneider]]
[[Category:Processing]]

GMU:Tutorials/Documentation/Codepen-Howto

2016-11-16T15:16:51Z

Ms: /* Creating Links to Codepen */

= Creating Links to Codepen =

You currently cannot embed codepens directly into the wiki. 
However it is quite easy to create a link to codepen with a preview image.

This tutorial shows to create previews that look like this (image link)

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

Or like this (thumbnail with link)

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

== Get the Slug ==

To embed a codepen you need its ''CODEPEN_SLUG'' which is a combination of letters and numbers. 
If your codepen is located at https://codepen.io/bitcraftlab/pen/MbjKNv the username is <code>bitcraftlab</code> and your slug is <code>MbjKNv</code>.

== Screenshots hosted at Codepen ==

With this slug you can retrieve screenshots provided by the codepen website. 
A small screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/small.png</nowiki></code>

A large screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/large.png</nowiki></code>

Let's say, your slug is <code>MbjKNv</code>. Then the small image can be found at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png</nowiki>] and the large one at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png</nowiki>].

=== Codepen Image Link ===

This is the simple and fast way to link to codepens uson
If you know your codepen slug you can easily create a image link using the thumbnail hosted at codepen using this syntax:

<code><nowiki> [YOUR_CODEPEN_URL YOUR_THUMBNAIL_URL]</nowiki></code>

Let's say my username is ''bitcraftlab'' and I want to embed the codepen with the slug ''MbjKNv''.
Then the syntax goes like this:
<pre>[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]</pre>

This is what it looks like:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

=== Codepen Thumbnail with Link ===

You can also provide an actual thumbnail, with a link to the codepen.
This is more cumbersome, because you need to upload the screenshot to our wiki, but it sure looks nicer.

This is how you do it:

* Download the screenshot from codepen, or make one yourself
* Upload the screenshot to the wiki using the [[Special:Upload|Uploader]] at Wikipages > Uploads.
** Filename: use a unique image name, I suggest <code>codepen-CODEPEN_SLUG.png</code>
** License: (c) by the image uploader
** Source: url of your codepen

Once you have uploaded the screenshot, you can embed it like this:

<pre>[[File:codepen-CODEPEN_SLUG.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/CODEPEN_SLUG view on codepen]]]
</pre>

This is what it looks like in the wiki:

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

That's it.

Have fun!

GMU:Tutorials/Documentation/Codepen-Howto

2016-11-16T14:55:34Z

Ms:

= Creating Links to Codepen =

You currently cannot embed codepens directly into the wiki. 
However it is quite easy to create a link to codepen with a preview image.

This tutorial shows to create previews that look like this (image link)

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

Or like this (thumbnail with link)

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

== Get the Slug ==

To embed a codepen you need its ''CODEPEN_SLUG'' which is a combination of letters and numbers. 
If your codepen is located at https://codepen.io/bitcraftlab/pen/MbjKNv the username is <code>bitcraftlab</code> and your slug is <code>MbjKNv</code>.

== Screenshots hosted at Codepen ==

With this slug you can retrieve screenshots provided by the codepen website. 
A small screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/small.png</nowiki></code>

A large screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/large.png</nowiki></code>

Let's say, your slug is <code>MbjKNv</code>. Then the small image can be found at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png</nowiki>] and the large one at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png</nowiki>].

=== Codepen Image Link ===

This is the simple and fast way to link to codepens uson
If you know your codepen slug you can easily create a image link using the thumbnail hosted at codepen using this syntax:

<code><nowiki> [YOUR_CODEPEN_URL YOUR_THUMBNAIL_URL]</nowiki></code>

Let's say my username is ''bitcraftlab'' and I want to embed the codepen with the slug ''MbjKNv''.
Then the syntax goes like this:
<pre>[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]</pre>

This is what it looks like:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

=== Codepen Thumbnail with Link ===

You can also provide an actual thumbnail, with a link to the codepen.
This is more cumbersome, because you need to upload the screenshot to our wiki, but it sure looks nicer.

This is how you do it:

* Download the screenshot from codepen, or make one yourself
* Upload the screenshot to the wiki using the [[Special:Upload|Uploader]] at Wikipages > Uploads.
** Filename: use a unique image name, I suggest <code>codepen-CODEPEN_SLUG.png</code>
** License: (c) by the image uploader
** Source: url of your codepen

Once you have uploaded the screenshot, you can embed it like this:

<pre>[[File:codepen-CODEPEN_SLUG.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/CODEPEN_SLUG view on codepen]]]
</pre>

That's it.
Have fun!

GMU:Tutorials/Documentation/Codepen-Howto

2016-11-16T14:45:06Z

Ms:

= Creating Links to Codepen =

You currently cannot embed codepens directly into the wiki. 
However it is quite easy to create a link to codepen with a preview image.

This tutorial shows to create previews that look like this:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

Or like this:

[[File:codepen-MbjKNv.png|400px|thumb|left|[https://codepen.io/bitcraftlab/pen/MbjKNv view on codepen]]]

 

== Get the Slug ==

To embed a codepen you need its ''CODEPEN_SLUG'' which is a combination of letters and numbers. 
If your codepen is located at https://codepen.io/bitcraftlab/pen/MbjKNv the username is <code>bitcraftlab</code> and your slug is <code>MbjKNv</code>.

== Screenshots hosted at Codepen ==

With this slug you can retrieve screenshots provided by the codepen website. 
A small screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/small.png</nowiki></code>

A large screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/large.png</nowiki></code>

Let's say, your slug is <code>MbjKNv</code>. Then the small image can be found at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png</nowiki>] and the large one at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png</nowiki>].

=== Codepen Image Link ===

This is the simple and fast way to link to codepens uson
If you know your codepen slug you can easily create a image link using the thumbnail hosted at codepen using this syntax:

<code><nowiki> [YOUR_CODEPEN_URL YOUR_THUMBNAIL_URL]</nowiki></code>.

Let's say my username is ''bitcraftlab'' and I want to embed the codepen with the slug ''MbjKNv''.
Then the syntax goes like this:
<pre>[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]</pre>

This is what it looks like:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

=== Thumbnail with Link ===

You can also provide an actual thumbnail, with a link to the codepen.
This is more cumbersome, but looks nicer.

File:Codepen-MbjKNv.png

2016-11-16T14:40:41Z

Ms: Screenshot generated by codepen

== Summary ==
Screenshot generated by codepen
== Copyright status: ==

== Licensing ==
{{self|c}}
== Source: ==
https://codepen.io/bitcraftlab/pen/MbjKNv

GMU:Tutorials/Documentation/Codepen-Howto

2016-11-16T14:38:29Z

Ms: Created page with " = Creating Links to Codepen = You currently cannot embed codepens directly into the wiki. However it is quite easy to create a link to codepen with a preview image. Th..."

= Creating Links to Codepen =

You currently cannot embed codepens directly into the wiki. 
However it is quite easy to create a link to codepen with a preview image.

This tutorial shows to create previews that look like this:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

Or like this:

[[File:codepen-MbjKNv.png|thumb|left]]

 

== Get the Slug ==

To embed a codepen you need its ''CODEPEN_SLUG'' which is a combination of letters and numbers. 
If your codepen is located at https://codepen.io/bitcraftlab/pen/MbjKNv the username is <code>bitcraftlab</code> and your slug is <code>MbjKNv</code>.

== Screenshots hosted at Codepen ==

With this slug you can retrieve screenshots provided by the codepen website. 
A small screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/small.png</nowiki></code>

A large screenshot is usually available at:

<code><nowiki>https://codepen.io/CODEPEN_USERNAME/pen/CODEPEN_SLUG/image/large.png</nowiki></code>

Let's say, your slug is <code>MbjKNv</code>. Then the small image can be found at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png</nowiki>] and the large one at [https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png <nowiki>https://codepen.io/bitcraftlab/pen/MbjKNv/image/large.png</nowiki>].

=== Codepen Image Link ===

This is the simple and fast way to link to codepens uson
If you know your codepen slug you can easily create a image link using the thumbnail hosted at codepen using this syntax:

<code><nowiki> [YOUR_CODEPEN_URL YOUR_THUMBNAIL_URL]</nowiki></code>.

Let's say my username is ''bitcraftlab'' and I want to embed the codepen with the slug ''MbjKNv''.
Then the syntax goes like this:
<pre>[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]</pre>

This is what it looks like:

[https://codepen.io/bitcraftlab/pen/MbjKNv https://codepen.io/bitcraftlab/pen/MbjKNv/image/small.png]

=== Thumbnail with Link ===

You can also provide an actual thumbnail, with a link to the codepen.
This is more cumbersome, but looks nicer.

GMU:Tutorials

2016-11-16T13:51:23Z

Ms: Link to Tutorial on Codepen Uploads

== Tutorials ==

This is a collection of hands-on tutorials created by students, teachers and friends of GMU.

Enjoy!

=== Documenting your Projects ===

==== Medien-Wiki ====
* [[/Documentation/Codepen-Howto|Uploading Links to Codepens]] (Martin Schneider)
* [[/Documentation/Wiki Uploading|Uploading Pictures to the Wiki]] (Fiona Mortimer)
* [[/Documentation/Wiki Homepage|Creating a Home Page on the Wiki]] (Fiona Mortimer)
* [[/Documentation/Tutorial How-To|Creating an Online-Tutorial]] (Tim Vischer)
* [[/Documentation/Bug Report How-To|Creating a Bug-Report]] (Tim Vischer)

=== Performance Plattform Tutorials ===
==== Tracking Platform ====
Working with the Tracking Platform
* [[/Performance Platform/Tracking Platform Calibration|Calibrating the Tracking System]] (Jessica Hüttig)
* [[/Performance Platform/Tracking Platform How-To|Using the Tracking System to track multiple Persons]] (Alicia Kremser)
* [[/Performance Platform/Recording Tracking Data|Recording Tracking Data]] (Christopher Dake-Outhet)
* [[/Performance Platform/Tracking Platform Export|Exporting Tracking Data]] (Florian Froger)
* [[/Performance Platform/Tracking Platform Rigging|Using Tracking Data in Blender]] (Jonas Jülch)
* [[/Performance Platform/Measuring Motion with Processing|Measuring Motion with Processing]] (Qianqian Li)
==== Video Wall ====
Working with the tiled Videowall
* [[/Performance Platform/Videowall Calibration|Calibrating the Videowall]] (Di Yang)
* [[/Performance Platform/Videowall Control|Controlling the Videowall]] (Shuyan Chen)

==== Sound System ====
Working with our Sound-System
* [[/Performance Platform/Sound System Stereo|Playing Stereo on the Sound System]] (Shih-Li Chao)
* [[/Performance Platform/Sound System Multi Speaker|Using the Multi-Speaker-System]] (Emilio Aguas)

==== People Tracking ====
* [[/Performance Platform/Custom People Counting|Custom Setup to count People using a Light Barrier]] (Kan Feng)
* [[/Performance Platform/Custom People Tracking|Custom Setup to track People using a Camera on the Ceiling]] (Shuyan Chen)
* [[/Performance_Platform/Controlling an Arduino with The Captury|Controlling an Arduino with The Captury]] (Xiangzhen Fan)

=== Networking Tutorials ===
==== Visual Interaction ====
Controlling Unity with OSC ...
* [[/Networking/Controlling Unity with IanniX|Controlling Unity with IanniX]]
* [[/Networking/Controlling Unity with Processing|Controlling Unity with Processing]] (Elena Liv Felderer)
* [[/Networking/Controlling Skeletons in Unity with The Captury|Controlling Skeletons in Unity with The Captury]] (Gianluca Pandolfo)
* [[/Networking/Controlling Objects in Unity with The Captury|Controlling Objects in Unity with The Captury]] (Yuxin Tan)
* [[/Networking/Controlling the Camera in Unity with The Captury|Controlling the Camera in Unity with The Captury]] (Junyuan Wu)
* [[/Networking/Controlling Processing with The Captury|Controlling Processing with The Captury]] (Yun Liu)

==== Sound Interaction ====
Controlling MAX Msp and PureData with OSC ...
* [[/Networking/Controlling MAX MSP with IanniX|Controlling MAX MSP with IanniX]]
* [[/Networking/Controlling PureData with IanniX|Controlling PureData with IanniX]]
* [[/Networking/Controlling MAX MSP with TheCaptury|Controlling Max MSP with The Captury]] (Janine Müller)

==== Gestures and Motion ====
Triggering OSC signals when a person makes certain movements, or moves into a certain part of space ...
* [[/Performance Platform/Recognizing Gestures with Wekinator|Recognizing Gestures with Wekinator]] (Rachel Smith)
* [[/Performance Platform/Training Trigger Spaces with Wekinator|Training Trigger Spaces with Wekinator]]
* [[/Performance Platform/Defining Trigger Spaces with Processing|Defining Trigger Spaces with Processing]]

=== Bio Lab Tutorials ===

==== Bio Art ====
* [[/Bio Lab/Intro|Introduction]]
* [[/Bio Lab/Microscopy|Microscopy]]
* [[/Bio Lab/PCR|PCR]]

==== Video Recording and Tracking ====
* [[/Bio Lab/Video-Recording 1|Video-Recording with IP-Camera]]
* [[/Bio Lab/Video-Recording 2|Video-Recording with DSLR]]
* [[/Bio Lab/Microscopy|Tracking Microbes with OpenCV]]

==== Data Recording ====
* [[/Bio Lab/Data-Recording 1|Data-Recording with Arduino]]
* [[/Bio Lab/Data-Recording 1|Data-Recording with Pico]]

GMU:Coding Experiments

2016-11-15T16:40:07Z

Ms: /* Media Wiki Hacking session */

== Coding Experiments Meetup ==

Thanks to the Tutorienfonds of the Bauhaus-Uni and thanks to the BMBF, we got funding for a tutor to help us run a weekly '''Coding Experiments Meet-Up'''. Also thanks to Lodewijk Heylen (Artist in Residence at the ACC) we got a cosy space where we can meet and code. 

== Location ==

{{note|The Coding Experiments Meet-Up is every Wednesday from 13:30 to 16:45 at Karl-Hausknecht-Straße 21. Google maps may direct you to the wrong location. '''You need to go to the blue circle!'''}}.

[[File:ACC-Atelier-KHC-21-Map.jpg]]

== Topics ==
=== MediaWiki Hacking session ===

'''16. November 2016, 13:30''' 
Learn how to use the Mediawiki to document your projects, create homepages and have fun with the software that powers Wikipedia.

GMU:Coding Experiments

2016-11-15T16:39:40Z

Ms:

== Coding Experiments Meetup ==

Thanks to the Tutorienfonds of the Bauhaus-Uni and thanks to the BMBF, we got funding for a tutor to help us run a weekly '''Coding Experiments Meet-Up'''. Also thanks to Lodewijk Heylen (Artist in Residence at the ACC) we got a cosy space where we can meet and code. 

== Location ==

{{note|The Coding Experiments Meet-Up is every Wednesday from 13:30 to 16:45 at Karl-Hausknecht-Straße 21. Google maps may direct you to the wrong location. '''You need to go to the blue circle!'''}}.

[[File:ACC-Atelier-KHC-21-Map.jpg]]

== Topics ==
=== Media Wiki Hacking session ===

'''16. November 2016, 13:30''' 
Learn how to use the Mediawiki to document your projects, create homepages and have fun with the software that powers Wikipedia.

GMU:Coding Experiments

2016-11-15T16:36:36Z

Ms:

GMU:Coding Experiments

2016-11-15T16:36:19Z

Ms: /* Location */

== Coding Experiments Meetup ==

Thanks to the Tutorienfonds of the Bauhaus-Uni and thanks to the BMBF, we got funding for a tutor to help us run a weekly '''Coding Experiments Meet-Up'''. Also thanks to Lodewijk Heylen (Artist in Residence at the ACC) we got a cosy space where we can meet and code. 

=== Location ===

{{note|The Coding Experiments Meet-Up is every Wednesday from 13:30 to 16:45 at Karl-Hausknecht-Straße 21. Google maps may direct you to the wrong location. '''You need to go to the blue circle!'''}}.

[[File:ACC-Atelier-KHC-21-Map.jpg]]

GMU:Coding Experiments

2016-11-15T16:35:52Z

Ms: /* Location */

== Coding Experiments Meetup ==

Thanks to the Tutorienfonds of the Bauhaus-Uni and thanks to the BMBF, we got funding for a tutor to help us run a weekly '''Coding Experiments Meet-Up'''. Also thanks to Lodewijk Heylen (Artist in Residence at the ACC) we got a cosy space where we can meet and code. 

=== Location ===

{{note|The Coding Experiments Meet-Up is every Wednesday from 13:30 to 16:45 at Karl-Hausknecht-Straße 21. Google maps may direct you to the wrong location. You need to go to the blue circle}}.

[[File:ACC-Atelier-KHC-21-Map.jpg]]

File:ACC-Atelier-KHC-21-Map.jpg

2016-11-15T16:31:45Z

Ms: Location of the weekly Coding Experiments Hackathon

== Summary ==
Location of the weekly Coding Experiments Hackathon
== Copyright status: ==
(c) google maps, fair use
== Source: ==

GMU:Coding Experiments

2016-11-15T16:30:31Z

Ms: add link to map

GMU:Meandering through Space/Part2

2016-11-08T17:54:19Z

Ms: /* Motion Capture */

= Meandering Code =

-----
== From Code to Curves ==

[[File:Beetleblocks_bsp.png|thumb|left|3D turtle graphics with [http://scratch-dach.info/wiki/Beetle_Blocks Beetleblox]]]

 

=== About ===
We will learn how to program turtles, and how to create abstract line drawings from code

=== Goals ===
* Learn to use string processing functions
* Learn to write a turtle code interpreter
* Basics of Object Oriented Programming (OOP)

=== Art ===
* John Venn: [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance, Randomness and its scientific treatment, p188] (1888)
* Boris Müller: [http://www.esono.com/boris/projects/poetry03/ Poetry on the Road] (2003)
* Sven Heyll: [https://www.flickr.com/photos/sheyll/2272716536/ Turtle DNA Rendering] (2008)
* Moritz Stephaner: [http://notabilia.net/ Notabilia] (2011)

-----
== Processing Curves ==

{{#ev:youtube|0x7rg9TpHSo|400|left|Evan Roth: Introducing Mozilla Mark Up|frame}}

 

=== About ===
We will get to know interfaces for creating curves, learn how to store them, and how to output them

=== Goals ===
* Learn how to use Libraries in Processing
* Learn how to read and write strings to files
* File Formats Graffiti (GML) and Motion Capture (BVH)
* Using input devices such as a Graphic Tablet, Tracking-System, etc. to create curves
* Use Processing to output curves in the visual domain
* Use Spacial Synthesizers such as Zirkonium and Iannix to output curves in the auditory domain

=== Links ===
==== Drawing and Writing ====
* [http://www.graffitimarkuplanguage.com/ Graffiti Markup Language] (GML)
* [http://000000book.com/ GML Database]
* [https://www.youtube.com/watch?v=F5PwDe9r-Ik Universal Typeface]
* [http://www.fki.inf.unibe.ch/databases/iam-on-line-handwriting-database Handwriting Database]
* [http://www.cs.toronto.edu/~graves/handwriting.cgi Handwriting Generator] (using a Neural Net)
==== Motion Capture ====
* [http://mocap.web.th-koeln.de/about.php Cologne Motion Capture Database] with WebGL Search!
* [http://prix2013.aec.at/prixwinner/11219/ Perfume Global Site Project]
* [https://github.com/perfume-dev/example-processing BVH Parser] for Processing
* [https://github.com/01010101/GML4U GML Library] for Processing
* [http://andrescolubri.net/processing/libraries/tablet/ Tablet] for Processing
* [https://www.youtube.com/watch?v=nPab7pbOhBY Graphics Tablet Primer for Hackers]
* [https://github.com/nok/leap-motion-processing Leap Motion Library] for Processing

=== Spacial Synthesizers ===
* [http://www.iannix.org/en/ IanniX] (Visual Synthesizer)
* [http://zkm.de/institute-forschungsstellen/institut-fuer-musik-und-akustik/software/zirkonium Zirkonium] (Surround Sound Synthesizer)

-----

== Transforming Curves ==

{{#ev:youtube|2xvczE4-5hs|400|left|Martin Schneider: Fractal Image Embroidery in Motion |frame}}

 

=== About ===
In this lecture we will learn how to transform curves programatically.

* '''Rewriting Curves''' — In the 1st part we learn how to create space filling curves and meanders with the help of rewriting systems.
* '''Remapping Curves''' — In the 2nd part we take curves to higher dimension and learn how to map points on a line to the plane (and back).

=== Goals ===
* Basics of Fractal Geometry
* Learn to work with data structures, arrays and vectors
* Learn how to design Lindenmayer-Systems
* Learn how to design Remapping-Systems

=== Literature ===
{{note|There is a most excellent book, titled '''Brain-Filling Curves: A Fractal Bestiary''' by Jeffrey Ventrella. 
Don't miss it. It's the best and most exciting book on spacefilling curves out there!}}
* Aristid Lindemeyer and Przemyslaw Prusinkiewicz: [http://algorithmicbotany.org/papers/abop/abop.pdf The Algorithmic Beauty of Plants] (1990)
* Jeffrey Ventrella: [https://archive.org/stream/BrainfillingCurves-AFractalBestiary/BrainFilling Brain-Filling Curves] (2012)

GMU:Meandering through Space/Part2

2016-11-08T17:54:00Z

Ms: oops, link is already there

= Meandering Code =

-----
== From Code to Curves ==

[[File:Beetleblocks_bsp.png|thumb|left|3D turtle graphics with [http://scratch-dach.info/wiki/Beetle_Blocks Beetleblox]]]

 

=== About ===
We will learn how to program turtles, and how to create abstract line drawings from code

=== Goals ===
* Learn to use string processing functions
* Learn to write a turtle code interpreter
* Basics of Object Oriented Programming (OOP)

=== Art ===
* John Venn: [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance, Randomness and its scientific treatment, p188] (1888)
* Boris Müller: [http://www.esono.com/boris/projects/poetry03/ Poetry on the Road] (2003)
* Sven Heyll: [https://www.flickr.com/photos/sheyll/2272716536/ Turtle DNA Rendering] (2008)
* Moritz Stephaner: [http://notabilia.net/ Notabilia] (2011)

-----
== Processing Curves ==

{{#ev:youtube|0x7rg9TpHSo|400|left|Evan Roth: Introducing Mozilla Mark Up|frame}}

 

=== About ===
We will get to know interfaces for creating curves, learn how to store them, and how to output them

=== Goals ===
* Learn how to use Libraries in Processing
* Learn how to read and write strings to files
* File Formats Graffiti (GML) and Motion Capture (BVH)
* Using input devices such as a Graphic Tablet, Tracking-System, etc. to create curves
* Use Processing to output curves in the visual domain
* Use Spacial Synthesizers such as Zirkonium and Iannix to output curves in the auditory domain

=== Links ===
==== Drawing and Writing ====
* [http://www.graffitimarkuplanguage.com/ Graffiti Markup Language] (GML)
* [http://000000book.com/ GML Database]
* [https://www.youtube.com/watch?v=F5PwDe9r-Ik Universal Typeface]
* [http://www.fki.inf.unibe.ch/databases/iam-on-line-handwriting-database Handwriting Database]
* [http://www.cs.toronto.edu/~graves/handwriting.cgi Handwriting Generator] (using a Neural Net)
==== Motion Capture ====
* [http://mocap.web.th-koeln.de/about.php Cologne Motion Capture Database] with WebGL Search!
* [http://prix2013.aec.at/prixwinner/11219/ Perfume Global Site Project]
* [https://github.com/perfume-dev/example-processing BVH Parser] for Processing
* [https://github.com/01010101/GML4U GML Library] for Processing
* [http://andrescolubri.net/processing/libraries/tablet/ Table] for Processing
* [https://www.youtube.com/watch?v=nPab7pbOhBY Graphics Tablet Primer for Hackers]
* [https://github.com/nok/leap-motion-processing Leap Motion Library] for Processing
=== Spacial Synthesizers ===
* [http://www.iannix.org/en/ IanniX] (Visual Synthesizer)
* [http://zkm.de/institute-forschungsstellen/institut-fuer-musik-und-akustik/software/zirkonium Zirkonium] (Surround Sound Synthesizer)

-----

== Transforming Curves ==

{{#ev:youtube|2xvczE4-5hs|400|left|Martin Schneider: Fractal Image Embroidery in Motion |frame}}

 

=== About ===
In this lecture we will learn how to transform curves programatically.

* '''Rewriting Curves''' — In the 1st part we learn how to create space filling curves and meanders with the help of rewriting systems.
* '''Remapping Curves''' — In the 2nd part we take curves to higher dimension and learn how to map points on a line to the plane (and back).

=== Goals ===
* Basics of Fractal Geometry
* Learn to work with data structures, arrays and vectors
* Learn how to design Lindenmayer-Systems
* Learn how to design Remapping-Systems

=== Literature ===
{{note|There is a most excellent book, titled '''Brain-Filling Curves: A Fractal Bestiary''' by Jeffrey Ventrella. 
Don't miss it. It's the best and most exciting book on spacefilling curves out there!}}
* Aristid Lindemeyer and Przemyslaw Prusinkiewicz: [http://algorithmicbotany.org/papers/abop/abop.pdf The Algorithmic Beauty of Plants] (1990)
* Jeffrey Ventrella: [https://archive.org/stream/BrainfillingCurves-AFractalBestiary/BrainFilling Brain-Filling Curves] (2012)

GMU:Meandering through Space/Part2

2016-11-08T17:52:51Z

Ms: add link to Perfume Processing Example

= Meandering Code =

-----
== From Code to Curves ==

[[File:Beetleblocks_bsp.png|thumb|left|3D turtle graphics with [http://scratch-dach.info/wiki/Beetle_Blocks Beetleblox]]]

 

=== About ===
We will learn how to program turtles, and how to create abstract line drawings from code

=== Goals ===
* Learn to use string processing functions
* Learn to write a turtle code interpreter
* Basics of Object Oriented Programming (OOP)

=== Art ===
* John Venn: [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance, Randomness and its scientific treatment, p188] (1888)
* Boris Müller: [http://www.esono.com/boris/projects/poetry03/ Poetry on the Road] (2003)
* Sven Heyll: [https://www.flickr.com/photos/sheyll/2272716536/ Turtle DNA Rendering] (2008)
* Moritz Stephaner: [http://notabilia.net/ Notabilia] (2011)

-----
== Processing Curves ==

{{#ev:youtube|0x7rg9TpHSo|400|left|Evan Roth: Introducing Mozilla Mark Up|frame}}

 

=== About ===
We will get to know interfaces for creating curves, learn how to store them, and how to output them

=== Goals ===
* Learn how to use Libraries in Processing
* Learn how to read and write strings to files
* File Formats Graffiti (GML) and Motion Capture (BVH)
* Using input devices such as a Graphic Tablet, Tracking-System, etc. to create curves
* Use Processing to output curves in the visual domain
* Use Spacial Synthesizers such as Zirkonium and Iannix to output curves in the auditory domain

=== Links ===
==== Drawing and Writing ====
* [http://www.graffitimarkuplanguage.com/ Graffiti Markup Language] (GML)
* [http://000000book.com/ GML Database]
* [https://www.youtube.com/watch?v=F5PwDe9r-Ik Universal Typeface]
* [http://www.fki.inf.unibe.ch/databases/iam-on-line-handwriting-database Handwriting Database]
* [http://www.cs.toronto.edu/~graves/handwriting.cgi Handwriting Generator] (using a Neural Net)
==== Motion Capture ====
* [http://mocap.web.th-koeln.de/about.php Cologne Motion Capture Database] with WebGL Search!
* [http://prix2013.aec.at/prixwinner/11219/ Perfume Global Site Project] + [https://github.com/perfume-dev/example-processing Processing Example]
* [https://github.com/perfume-dev/example-processing BVH Parser] for Processing
* [https://github.com/01010101/GML4U GML Library] for Processing
* [http://andrescolubri.net/processing/libraries/tablet/ Table] for Processing
* [https://www.youtube.com/watch?v=nPab7pbOhBY Graphics Tablet Primer for Hackers]
* [https://github.com/nok/leap-motion-processing Leap Motion Library] for Processing
=== Spacial Synthesizers ===
* [http://www.iannix.org/en/ IanniX] (Visual Synthesizer)
* [http://zkm.de/institute-forschungsstellen/institut-fuer-musik-und-akustik/software/zirkonium Zirkonium] (Surround Sound Synthesizer)

-----

== Transforming Curves ==

{{#ev:youtube|2xvczE4-5hs|400|left|Martin Schneider: Fractal Image Embroidery in Motion |frame}}

 

=== About ===
In this lecture we will learn how to transform curves programatically.

* '''Rewriting Curves''' — In the 1st part we learn how to create space filling curves and meanders with the help of rewriting systems.
* '''Remapping Curves''' — In the 2nd part we take curves to higher dimension and learn how to map points on a line to the plane (and back).

=== Goals ===
* Basics of Fractal Geometry
* Learn to work with data structures, arrays and vectors
* Learn how to design Lindenmayer-Systems
* Learn how to design Remapping-Systems

=== Literature ===
{{note|There is a most excellent book, titled '''Brain-Filling Curves: A Fractal Bestiary''' by Jeffrey Ventrella. 
Don't miss it. It's the best and most exciting book on spacefilling curves out there!}}
* Aristid Lindemeyer and Przemyslaw Prusinkiewicz: [http://algorithmicbotany.org/papers/abop/abop.pdf The Algorithmic Beauty of Plants] (1990)
* Jeffrey Ventrella: [https://archive.org/stream/BrainfillingCurves-AFractalBestiary/BrainFilling Brain-Filling Curves] (2012)

GMU:Meandering through Space/Part1

2016-11-07T11:02:42Z

Ms: Add thumbnails from codepen

= Meandering Curves =

-----
== Introduction ==

[[File:meander-construction-stuebel.jpg|400px|thumb|left|[https://archive.org/stream/mhaanderkreuze00heinrich#page/13/mode/1up Meander Construction] by Symmetry Breaking (Stübel)]]

 

=== About ===
This lecture provides an overview of the course and meanders through space and time.

=== Goals ===
* Overview of the course
* History of meanders in nature and design
* Basic understanding of generative coding
* Basic understanding of self organisation

=== Inspiration ===

==== Nature ====
* Harold Fisk: [http://www.radicalcartography.net/index.html?fisk Mississippi Maps] (1944)
* Daniel E. Coe: [http://www.oregongeology.org/pubs/ll/p-poster-willamette.htm Willamette River, Oregon] (2013)

==== Culture ====
* Alois Raimund Hain: [https://archive.org/details/mhaanderkreuze00heinrich Mäander, Kreuze, Hakenkreuze] (1852)
* Owen Jones: [https://archive.org/stream/grammarornament00Jone#page/XV/mode/1up The Grammar of Ornament ] (1856)
* koFactorLab: [http://lab.kofaktor.hr/en/portfolio/super-flexible-laser-cut-plywood/ Super-Flexible Laser-Cut Plywood] (2015)

==== Art ====
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide2 Red Meander] (1954)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide7 Intersecting] (1962)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide5 Under Way] (1963)
* Wilson Thomas: [http://luc.devroye.org/WilsonThomas--Tramarada--2011.png Tramarada Font] (2011)

=== Literature ===
==== Meanders ====
* Hans-Henrik Stølum: [http://raaf.org/pdfs/meandering_river.pdf River Meandering as a Self-Organization Process] (1996)
* Jeffrey Ventrella: [https://archive.org/details/BrainfillingCurves-AFractalBestiary Brain-filling Curves: A fractal Bestiary] (2012)
* Jenny Sabin: [http://viewer.zmags.com/publication/05726862 Meander: Variegating Architecture] (2010) — ISBN 978-0415424271

==== Lines ====
* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Wassily Kandisky: ''[http://bibliothequekandinsky.centrepompidou.fr/imagesbk/RLPF728/M5050_X0031_LIV_RLPF0728.pdf Punkt und Linie zu Fläche]'' (1926)

==== Labyrinths and Mazes ====
* William Henry Matthews: [https://archive.org/details/mazeslabyrinthsg1922matt Mazes and Labyrinths: A general Account of their History and Developments] (1922)
* Herrmann Kern: ''Labyrinthe'' (1999) — ISBN 978-3791306148
* Sam McElhinney: ''[https://www.dropbox.com/s/d4h2mh6kmg0tbu7/McElhinney-Labyrinths_Mazes_and_the_Spaces_Inbetween.pdf Labyrinths, Mazes and the Spaces inbetween]'' (2009)
* Casey Reas: [http://10print.org/ 10 PRINT] (2012) — ISBN 978-0819426529 or [http://trope-tank.mit.edu/10_PRINT_121114.pdf PDF]

==== Science ====
* E.Gail Hutchinson and Janet M.Thornton: [http://peds.oxfordjournals.org/content/6/3/233.full.pdf The Greek key motif: extraction, classification and analysis] (1993)

-----
== Collaborative Drawing ==

{{#ev:youtube|CTn4FE3b8DQ|400|left|Studio Moniker: Conditional Design Workshop|frame}}

 

=== About ===
In this lecture we will draw curves using everything from paper to online tools.

=== Goals ===
* Learn about algorithms
* Learn about constraints
* Design your own algorithm

=== Sol Lewitt ===

Sol Lewitt's [http://www.thegundgallery.org/2013/07/sol-lewitt/ Walldrawing] from the Do It Exhibition (2001):

:''A black not straight line is drawn at approximately the center of the wall horizontally from side to side.''
:''Alternate red, yellow and blue lines are drawn above and below the black line to the top and bottom of the wall''

More walldrawings in this [http://massmoca.org/sol-lewitt/ retrospective].

=== Conditional Design ===
* Studio Moniker: [https://conditionaldesign.org Conditional Design Website]
* Studio Moniker: [https://www.youtube.com/watch?v=CTn4FE3b8DQ Conditional Design Workshop] (2013)
* Studio Moniker: [https://vimeo.com/channels/gdfbtv/12260671 Conditional Design Keynote] (2015)

=== Hypercomics ===
* Ted Nelson: [https://www.google.de/#q=computer+lib+dream+machines Computer Lib / Dream Machines] (1974) feat. [https://twitter.com/bitcraftlab/status/773977855604719616 Hypercomics]
* Scott McCloud: [http://scottmccloud.com/4-inventions/canvas/ Infinite Canvas] (2009)

=== Collaborative Canvas ===
* Wikipedia: [[wikipedia:Exquisite Corpse|Exquisite Corpse]]
* Hannes Niepold und Hans Wastlhuber: [http://www.cointel.de/index1.html cOiNTEL] (2000) — a collaborative hypercomic
* Ralph Schulz: [http://www.superfreedraw.com Super Free Draw] (2010)
* Xavier Barrade: [http://www.epicexquisitecorpse.com/ Epic Exquisite Corpse] (2011)
* Aaron Koblin: [http://www.exquisiteforest.com/ This Exquisite Forest] (2012)
* Ai Weiwei and Olafur Eliasson: [http://www.moonmoonmoonmoon.com/ Moon] (2013)

=== Connection Games ===
* Wikipedia: [[wikipedia:Hex_(board_game)|Hex Board Game]]
* Cameron Browne: ''Connection Games: Variations on a Theme'' (2003) — ISBN 978-1568812243
* John Conway: ''Winning Ways for Your Mathematical Plays'' (1982) — [https://lhwei.gbv.de/FAM?PPN=031635741 Gewinnen: Strategien für mathematische Spiele]

=== Tiling Systems ===
* Dominique Douat: [https://github.com/bitcraftlab/10PRINT/raw/master/lit/douat.pdf Méthode pour faire une infinité de desseins differens] (1722)
* Keith Haring: [https://twitter.com/bitcraftlab/status/697814780753616897 Drawings for Multiple Figures from 8 Seperate Tiles] (1982)
* BoardGame Geek: [https://boardgamegeek.com/geeklist/54579/games-inspired-truchet-tiles Games inspired by Truchet Tiles]

=== Reading Lists ===
* [http://www.flong.com/blog/2014/computing-without-computers/ Computing without Computers]
* [https://socialmediacollective.org/reading-lists/critical-algorithm-studies/ Critical Algorithm Studies Reading List]

-----
== Random Walks ==

[[File:john-venn-pi-walk.png|400px|thumb|left|John Venn [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance] (1888) ]]

 

=== About ===
In this class we will learn how to use randomness to create curves.

=== Goals ===
* Learn to use and create functions in processing
* Basics of determinism, randomness and pseudo-randomness
* Learn about random distributions
* Learn about noise functions

=== Code ===
* Connect Random Points 
[https://codepen.io/bitcraftlab/details/mOyayr/ https://codepen.io/bitcraftlab/pen/mOyayr/image/small.png]
* Random Walk 
[https://codepen.io/bitcraftlab/details/woBNxV/ https://codepen.io/bitcraftlab/pen/woBNxV/image/small.png]
* Nature of Code : [http://natureofcode.com/book/introduction/ Introduction] to Randomness by Daniel Shiffman
** Random Walk Tutorial — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/sketch.js Code]
** Random Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/sketch.js Code]
** Random Walk tends to the right — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/sketch.js Code]
** Gaussian Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/sketch.js Code]
** Noise Walk — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_05_NoiseWalk/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/tree/master/introduction/NOC_I_05_NoiseWalk/sketch.js Code]
** 1 dimensional noise — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/sketch.js Code]

=== Links ===
* [http://walks.carma.newcastle.edu.au/ Walking on Real Numbers]
* [http://www.random-walk.com/ Visualizing Randomness] (Anti-Dataviz)

==== Art ====
* [http://cyberneticzoo.com/mazesolvers/1952-%E2%80%93-theseus-maze-solving-mouse-%E2%80%93-claude-shannon-american/ Claude Shannon's Theseus] in [https://books.google.de/books?id=3VUEAAAAMBAJ&pg=PA45 in Live Magazine] and [http://cyberneticzoo.com/wp-content/uploads/2010/04/Shannon-Maze-PopSci_Mar19521.pdf Popular Science]
* [https://www.flickr.com/groups/roomba/pool/ Roomba Art Pool] on Flickr
* [https://www.flickr.com/photos/sergioalbiac/albums/72157625497147722 Drawn not Void] by Sergio Albiac (2010)

==== Science ====
* [http://electronics.howstuffworks.com/gadgets/home/robotic-vacuum.htm/printable How Robotic Vacuums work]

GMU:Meandering through Space/Part1

2016-11-07T10:46:17Z

Ms: link to random walk codepen

= Meandering Curves =

-----
== Introduction ==

[[File:meander-construction-stuebel.jpg|400px|thumb|left|[https://archive.org/stream/mhaanderkreuze00heinrich#page/13/mode/1up Meander Construction] by Symmetry Breaking (Stübel)]]

 

=== About ===
This lecture provides an overview of the course and meanders through space and time.

=== Goals ===
* Overview of the course
* History of meanders in nature and design
* Basic understanding of generative coding
* Basic understanding of self organisation

=== Inspiration ===

==== Nature ====
* Harold Fisk: [http://www.radicalcartography.net/index.html?fisk Mississippi Maps] (1944)
* Daniel E. Coe: [http://www.oregongeology.org/pubs/ll/p-poster-willamette.htm Willamette River, Oregon] (2013)

==== Culture ====
* Alois Raimund Hain: [https://archive.org/details/mhaanderkreuze00heinrich Mäander, Kreuze, Hakenkreuze] (1852)
* Owen Jones: [https://archive.org/stream/grammarornament00Jone#page/XV/mode/1up The Grammar of Ornament ] (1856)
* koFactorLab: [http://lab.kofaktor.hr/en/portfolio/super-flexible-laser-cut-plywood/ Super-Flexible Laser-Cut Plywood] (2015)

==== Art ====
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide2 Red Meander] (1954)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide7 Intersecting] (1962)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide5 Under Way] (1963)
* Wilson Thomas: [http://luc.devroye.org/WilsonThomas--Tramarada--2011.png Tramarada Font] (2011)

=== Literature ===
==== Meanders ====
* Hans-Henrik Stølum: [http://raaf.org/pdfs/meandering_river.pdf River Meandering as a Self-Organization Process] (1996)
* Jeffrey Ventrella: [https://archive.org/details/BrainfillingCurves-AFractalBestiary Brain-filling Curves: A fractal Bestiary] (2012)
* Jenny Sabin: [http://viewer.zmags.com/publication/05726862 Meander: Variegating Architecture] (2010) — ISBN 978-0415424271

==== Lines ====
* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Wassily Kandisky: ''[http://bibliothequekandinsky.centrepompidou.fr/imagesbk/RLPF728/M5050_X0031_LIV_RLPF0728.pdf Punkt und Linie zu Fläche]'' (1926)

==== Labyrinths and Mazes ====
* William Henry Matthews: [https://archive.org/details/mazeslabyrinthsg1922matt Mazes and Labyrinths: A general Account of their History and Developments] (1922)
* Herrmann Kern: ''Labyrinthe'' (1999) — ISBN 978-3791306148
* Sam McElhinney: ''[https://www.dropbox.com/s/d4h2mh6kmg0tbu7/McElhinney-Labyrinths_Mazes_and_the_Spaces_Inbetween.pdf Labyrinths, Mazes and the Spaces inbetween]'' (2009)
* Casey Reas: [http://10print.org/ 10 PRINT] (2012) — ISBN 978-0819426529 or [http://trope-tank.mit.edu/10_PRINT_121114.pdf PDF]

==== Science ====
* E.Gail Hutchinson and Janet M.Thornton: [http://peds.oxfordjournals.org/content/6/3/233.full.pdf The Greek key motif: extraction, classification and analysis] (1993)

-----
== Collaborative Drawing ==

{{#ev:youtube|CTn4FE3b8DQ|400|left|Studio Moniker: Conditional Design Workshop|frame}}

 

=== About ===
In this lecture we will draw curves using everything from paper to online tools.

=== Goals ===
* Learn about algorithms
* Learn about constraints
* Design your own algorithm

=== Sol Lewitt ===

Sol Lewitt's [http://www.thegundgallery.org/2013/07/sol-lewitt/ Walldrawing] from the Do It Exhibition (2001):

:''A black not straight line is drawn at approximately the center of the wall horizontally from side to side.''
:''Alternate red, yellow and blue lines are drawn above and below the black line to the top and bottom of the wall''

More walldrawings in this [http://massmoca.org/sol-lewitt/ retrospective].

=== Conditional Design ===
* Studio Moniker: [https://conditionaldesign.org Conditional Design Website]
* Studio Moniker: [https://www.youtube.com/watch?v=CTn4FE3b8DQ Conditional Design Workshop] (2013)
* Studio Moniker: [https://vimeo.com/channels/gdfbtv/12260671 Conditional Design Keynote] (2015)

=== Hypercomics ===
* Ted Nelson: [https://www.google.de/#q=computer+lib+dream+machines Computer Lib / Dream Machines] (1974) feat. [https://twitter.com/bitcraftlab/status/773977855604719616 Hypercomics]
* Scott McCloud: [http://scottmccloud.com/4-inventions/canvas/ Infinite Canvas] (2009)

=== Collaborative Canvas ===
* Wikipedia: [[wikipedia:Exquisite Corpse|Exquisite Corpse]]
* Hannes Niepold und Hans Wastlhuber: [http://www.cointel.de/index1.html cOiNTEL] (2000) — a collaborative hypercomic
* Ralph Schulz: [http://www.superfreedraw.com Super Free Draw] (2010)
* Xavier Barrade: [http://www.epicexquisitecorpse.com/ Epic Exquisite Corpse] (2011)
* Aaron Koblin: [http://www.exquisiteforest.com/ This Exquisite Forest] (2012)
* Ai Weiwei and Olafur Eliasson: [http://www.moonmoonmoonmoon.com/ Moon] (2013)

=== Connection Games ===
* Wikipedia: [[wikipedia:Hex_(board_game)|Hex Board Game]]
* Cameron Browne: ''Connection Games: Variations on a Theme'' (2003) — ISBN 978-1568812243
* John Conway: ''Winning Ways for Your Mathematical Plays'' (1982) — [https://lhwei.gbv.de/FAM?PPN=031635741 Gewinnen: Strategien für mathematische Spiele]

=== Tiling Systems ===
* Dominique Douat: [https://github.com/bitcraftlab/10PRINT/raw/master/lit/douat.pdf Méthode pour faire une infinité de desseins differens] (1722)
* Keith Haring: [https://twitter.com/bitcraftlab/status/697814780753616897 Drawings for Multiple Figures from 8 Seperate Tiles] (1982)
* BoardGame Geek: [https://boardgamegeek.com/geeklist/54579/games-inspired-truchet-tiles Games inspired by Truchet Tiles]

=== Reading Lists ===
* [http://www.flong.com/blog/2014/computing-without-computers/ Computing without Computers]
* [https://socialmediacollective.org/reading-lists/critical-algorithm-studies/ Critical Algorithm Studies Reading List]

-----
== Random Walks ==

[[File:john-venn-pi-walk.png|400px|thumb|left|John Venn [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance] (1888) ]]

 

=== About ===
In this class we will learn how to use randomness to create curves.

=== Goals ===
* Learn to use and create functions in processing
* Basics of determinism, randomness and pseudo-randomness
* Learn about random distributions
* Learn about noise functions

=== Code ===
* Meandering through Space
** Connect Random Points — [https://codepen.io/bitcraftlab/details/mOyayr/ CodePen]
** Random Walk — [https://codepen.io/bitcraftlab/details/woBNxV/ CodePen]
* Nature of Code : [http://natureofcode.com/book/introduction/ Introduction] to Randomness by Daniel Shiffman
** Random Walk Tutorial — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/sketch.js Code]
** Random Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/sketch.js Code]
** Random Walk tends to the right — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/sketch.js Code]
** Gaussian Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/sketch.js Code]
** Noise Walk — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_05_NoiseWalk/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/tree/master/introduction/NOC_I_05_NoiseWalk/sketch.js Code]
** 1 dimensional noise — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/sketch.js Code]

=== Links ===
* [http://walks.carma.newcastle.edu.au/ Walking on Real Numbers]
* [http://www.random-walk.com/ Visualizing Randomness] (Anti-Dataviz)

==== Art ====
* [http://cyberneticzoo.com/mazesolvers/1952-%E2%80%93-theseus-maze-solving-mouse-%E2%80%93-claude-shannon-american/ Claude Shannon's Theseus] in [https://books.google.de/books?id=3VUEAAAAMBAJ&pg=PA45 in Live Magazine] and [http://cyberneticzoo.com/wp-content/uploads/2010/04/Shannon-Maze-PopSci_Mar19521.pdf Popular Science]
* [https://www.flickr.com/groups/roomba/pool/ Roomba Art Pool] on Flickr
* [https://www.flickr.com/photos/sergioalbiac/albums/72157625497147722 Drawn not Void] by Sergio Albiac (2010)

==== Science ====
* [http://electronics.howstuffworks.com/gadgets/home/robotic-vacuum.htm/printable How Robotic Vacuums work]

GMU:Meandering through Space/Part1

2016-11-07T09:43:02Z

Ms:

= Meandering Curves =

-----
== Introduction ==

[[File:meander-construction-stuebel.jpg|400px|thumb|left|[https://archive.org/stream/mhaanderkreuze00heinrich#page/13/mode/1up Meander Construction] by Symmetry Breaking (Stübel)]]

 

=== About ===
This lecture provides an overview of the course and meanders through space and time.

=== Goals ===
* Overview of the course
* History of meanders in nature and design
* Basic understanding of generative coding
* Basic understanding of self organisation

=== Inspiration ===

==== Nature ====
* Harold Fisk: [http://www.radicalcartography.net/index.html?fisk Mississippi Maps] (1944)
* Daniel E. Coe: [http://www.oregongeology.org/pubs/ll/p-poster-willamette.htm Willamette River, Oregon] (2013)

==== Culture ====
* Alois Raimund Hain: [https://archive.org/details/mhaanderkreuze00heinrich Mäander, Kreuze, Hakenkreuze] (1852)
* Owen Jones: [https://archive.org/stream/grammarornament00Jone#page/XV/mode/1up The Grammar of Ornament ] (1856)
* koFactorLab: [http://lab.kofaktor.hr/en/portfolio/super-flexible-laser-cut-plywood/ Super-Flexible Laser-Cut Plywood] (2015)

==== Art ====
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide2 Red Meander] (1954)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide7 Intersecting] (1962)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide5 Under Way] (1963)
* Wilson Thomas: [http://luc.devroye.org/WilsonThomas--Tramarada--2011.png Tramarada Font] (2011)

=== Literature ===
==== Meanders ====
* Hans-Henrik Stølum: [http://raaf.org/pdfs/meandering_river.pdf River Meandering as a Self-Organization Process] (1996)
* Jeffrey Ventrella: [https://archive.org/details/BrainfillingCurves-AFractalBestiary Brain-filling Curves: A fractal Bestiary] (2012)
* Jenny Sabin: [http://viewer.zmags.com/publication/05726862 Meander: Variegating Architecture] (2010) — ISBN 978-0415424271

==== Lines ====
* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Wassily Kandisky: ''[http://bibliothequekandinsky.centrepompidou.fr/imagesbk/RLPF728/M5050_X0031_LIV_RLPF0728.pdf Punkt und Linie zu Fläche]'' (1926)

==== Labyrinths and Mazes ====
* William Henry Matthews: [https://archive.org/details/mazeslabyrinthsg1922matt Mazes and Labyrinths: A general Account of their History and Developments] (1922)
* Herrmann Kern: ''Labyrinthe'' (1999) — ISBN 978-3791306148
* Sam McElhinney: ''[https://www.dropbox.com/s/d4h2mh6kmg0tbu7/McElhinney-Labyrinths_Mazes_and_the_Spaces_Inbetween.pdf Labyrinths, Mazes and the Spaces inbetween]'' (2009)
* Casey Reas: [http://10print.org/ 10 PRINT] (2012) — ISBN 978-0819426529 or [http://trope-tank.mit.edu/10_PRINT_121114.pdf PDF]

==== Science ====
* E.Gail Hutchinson and Janet M.Thornton: [http://peds.oxfordjournals.org/content/6/3/233.full.pdf The Greek key motif: extraction, classification and analysis] (1993)

-----
== Collaborative Drawing ==

{{#ev:youtube|CTn4FE3b8DQ|400|left|Studio Moniker: Conditional Design Workshop|frame}}

 

=== About ===
In this lecture we will draw curves using everything from paper to online tools.

=== Goals ===
* Learn about algorithms
* Learn about constraints
* Design your own algorithm

=== Sol Lewitt ===

Sol Lewitt's [http://www.thegundgallery.org/2013/07/sol-lewitt/ Walldrawing] from the Do It Exhibition (2001):

:''A black not straight line is drawn at approximately the center of the wall horizontally from side to side.''
:''Alternate red, yellow and blue lines are drawn above and below the black line to the top and bottom of the wall''

More walldrawings in this [http://massmoca.org/sol-lewitt/ retrospective].

=== Conditional Design ===
* Studio Moniker: [https://conditionaldesign.org Conditional Design Website]
* Studio Moniker: [https://www.youtube.com/watch?v=CTn4FE3b8DQ Conditional Design Workshop] (2013)
* Studio Moniker: [https://vimeo.com/channels/gdfbtv/12260671 Conditional Design Keynote] (2015)

=== Hypercomics ===
* Ted Nelson: [https://www.google.de/#q=computer+lib+dream+machines Computer Lib / Dream Machines] (1974) feat. [https://twitter.com/bitcraftlab/status/773977855604719616 Hypercomics]
* Scott McCloud: [http://scottmccloud.com/4-inventions/canvas/ Infinite Canvas] (2009)

=== Collaborative Canvas ===
* Wikipedia: [[wikipedia:Exquisite Corpse|Exquisite Corpse]]
* Hannes Niepold und Hans Wastlhuber: [http://www.cointel.de/index1.html cOiNTEL] (2000) — a collaborative hypercomic
* Ralph Schulz: [http://www.superfreedraw.com Super Free Draw] (2010)
* Xavier Barrade: [http://www.epicexquisitecorpse.com/ Epic Exquisite Corpse] (2011)
* Aaron Koblin: [http://www.exquisiteforest.com/ This Exquisite Forest] (2012)
* Ai Weiwei and Olafur Eliasson: [http://www.moonmoonmoonmoon.com/ Moon] (2013)

=== Connection Games ===
* Wikipedia: [[wikipedia:Hex_(board_game)|Hex Board Game]]
* Cameron Browne: ''Connection Games: Variations on a Theme'' (2003) — ISBN 978-1568812243
* John Conway: ''Winning Ways for Your Mathematical Plays'' (1982) — [https://lhwei.gbv.de/FAM?PPN=031635741 Gewinnen: Strategien für mathematische Spiele]

=== Tiling Systems ===
* Dominique Douat: [https://github.com/bitcraftlab/10PRINT/raw/master/lit/douat.pdf Méthode pour faire une infinité de desseins differens] (1722)
* Keith Haring: [https://twitter.com/bitcraftlab/status/697814780753616897 Drawings for Multiple Figures from 8 Seperate Tiles] (1982)
* BoardGame Geek: [https://boardgamegeek.com/geeklist/54579/games-inspired-truchet-tiles Games inspired by Truchet Tiles]

=== Reading Lists ===
* [http://www.flong.com/blog/2014/computing-without-computers/ Computing without Computers]
* [https://socialmediacollective.org/reading-lists/critical-algorithm-studies/ Critical Algorithm Studies Reading List]

-----
== Random Walks ==

[[File:john-venn-pi-walk.png|400px|thumb|left|John Venn [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance] (1888) ]]

 

=== About ===
In this class we will learn how to use randomness to create curves.

=== Goals ===
* Learn to use and create functions in processing
* Basics of determinism, randomness and pseudo-randomness
* Learn about random distributions
* Learn about noise functions

=== Code ===
* Meandering through Space
** Connect Random Points + Custom Random Function — [https://codepen.io/bitcraftlab/details/mOyayr/ CodePen]
* Nature of Code : [http://natureofcode.com/book/introduction/ Introduction] to Randomness by Daniel Shiffman
** Random Walk Tutorial — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/sketch.js Code]
** Random Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/sketch.js Code]
** Random Walk tends to the right — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/sketch.js Code]
** Gaussian Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/sketch.js Code]
** Noise Walk — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_05_NoiseWalk/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/tree/master/introduction/NOC_I_05_NoiseWalk/sketch.js Code]
** 1 dimensional noise — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/sketch.js Code]

=== Links ===
* [http://walks.carma.newcastle.edu.au/ Walking on Real Numbers]
* [http://www.random-walk.com/ Visualizing Randomness] (Anti-Dataviz)

==== Art ====
* [http://cyberneticzoo.com/mazesolvers/1952-%E2%80%93-theseus-maze-solving-mouse-%E2%80%93-claude-shannon-american/ Claude Shannon's Theseus] in [https://books.google.de/books?id=3VUEAAAAMBAJ&pg=PA45 in Live Magazine] and [http://cyberneticzoo.com/wp-content/uploads/2010/04/Shannon-Maze-PopSci_Mar19521.pdf Popular Science]
* [https://www.flickr.com/groups/roomba/pool/ Roomba Art Pool] on Flickr
* [https://www.flickr.com/photos/sergioalbiac/albums/72157625497147722 Drawn not Void] by Sergio Albiac (2010)

==== Science ====
* [http://electronics.howstuffworks.com/gadgets/home/robotic-vacuum.htm/printable How Robotic Vacuums work]

GMU:Meandering through Space/Part1

2016-11-07T09:42:30Z

Ms: /* Code */

= Meandering Curves =

-----
== Introduction ==

[[File:meander-construction-stuebel.jpg|400px|thumb|left|[https://archive.org/stream/mhaanderkreuze00heinrich#page/13/mode/1up Meander Construction] by Symmetry Breaking (Stübel)]]

 

=== About ===
This lecture provides an overview of the course and meanders through space and time.

=== Goals ===
* Overview of the course
* History of meanders in nature and design
* Basic understanding of generative coding
* Basic understanding of self organisation

=== Inspiration ===

==== Nature ====
* Harold Fisk: [http://www.radicalcartography.net/index.html?fisk Mississippi Maps] (1944)
* Daniel E. Coe: [http://www.oregongeology.org/pubs/ll/p-poster-willamette.htm Willamette River, Oregon] (2013)

==== Culture ====
* Alois Raimund Hain: [https://archive.org/details/mhaanderkreuze00heinrich Mäander, Kreuze, Hakenkreuze] (1852)
* Owen Jones: [https://archive.org/stream/grammarornament00Jone#page/XV/mode/1up The Grammar of Ornament ] (1856)
* koFactorLab: [http://lab.kofaktor.hr/en/portfolio/super-flexible-laser-cut-plywood/ Super-Flexible Laser-Cut Plywood] (2015)

==== Art ====
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide2 Red Meander] (1954)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide7 Intersecting] (1962)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide5 Under Way] (1963)
* Wilson Thomas: [http://luc.devroye.org/WilsonThomas--Tramarada--2011.png Tramarada Font] (2011)

=== Literature ===
==== Meanders ====
* Hans-Henrik Stølum: [http://raaf.org/pdfs/meandering_river.pdf River Meandering as a Self-Organization Process] (1996)
* Jeffrey Ventrella: [https://archive.org/details/BrainfillingCurves-AFractalBestiary Brain-filling Curves: A fractal Bestiary] (2012)
* Jenny Sabin: [http://viewer.zmags.com/publication/05726862 Meander: Variegating Architecture] (2010) — ISBN 978-0415424271

==== Lines ====
* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Wassily Kandisky: ''[http://bibliothequekandinsky.centrepompidou.fr/imagesbk/RLPF728/M5050_X0031_LIV_RLPF0728.pdf Punkt und Linie zu Fläche]'' (1926)

==== Labyrinths and Mazes ====
* William Henry Matthews: [https://archive.org/details/mazeslabyrinthsg1922matt Mazes and Labyrinths: A general Account of their History and Developments] (1922)
* Herrmann Kern: ''Labyrinthe'' (1999) — ISBN 978-3791306148
* Sam McElhinney: ''[https://www.dropbox.com/s/d4h2mh6kmg0tbu7/McElhinney-Labyrinths_Mazes_and_the_Spaces_Inbetween.pdf Labyrinths, Mazes and the Spaces inbetween]'' (2009)
* Casey Reas: [http://10print.org/ 10 PRINT] (2012) — ISBN 978-0819426529 or [http://trope-tank.mit.edu/10_PRINT_121114.pdf PDF]

==== Science ====
* E.Gail Hutchinson and Janet M.Thornton: [http://peds.oxfordjournals.org/content/6/3/233.full.pdf The Greek key motif: extraction, classification and analysis] (1993)

-----
== Collaborative Drawing ==

{{#ev:youtube|CTn4FE3b8DQ|400|left|Studio Moniker: Conditional Design Workshop|frame}}

 

=== About ===
In this lecture we will draw curves using everything from paper to online tools.

=== Goals ===
* Learn about algorithms
* Learn about constraints
* Design your own algorithm

=== Sol Lewitt ===

Sol Lewitt's [http://www.thegundgallery.org/2013/07/sol-lewitt/ Walldrawing] from the Do It Exhibition (2001):

:''A black not straight line is drawn at approximately the center of the wall horizontally from side to side.''
:''Alternate red, yellow and blue lines are drawn above and below the black line to the top and bottom of the wall''

More walldrawings in this [http://massmoca.org/sol-lewitt/ retrospective].

=== Conditional Design ===
* Studio Moniker: [https://conditionaldesign.org Conditional Design Website]
* Studio Moniker: [https://www.youtube.com/watch?v=CTn4FE3b8DQ Conditional Design Workshop] (2013)
* Studio Moniker: [https://vimeo.com/channels/gdfbtv/12260671 Conditional Design Keynote] (2015)

=== Hypercomics ===
* Ted Nelson: [https://www.google.de/#q=computer+lib+dream+machines Computer Lib / Dream Machines] (1974) feat. [https://twitter.com/bitcraftlab/status/773977855604719616 Hypercomics]
* Scott McCloud: [http://scottmccloud.com/4-inventions/canvas/ Infinite Canvas] (2009)

=== Collaborative Canvas ===
* Wikipedia: [[wikipedia:Exquisite Corpse|Exquisite Corpse]]
* Hannes Niepold und Hans Wastlhuber: [http://www.cointel.de/index1.html cOiNTEL] (2000) — a collaborative hypercomic
* Ralph Schulz: [http://www.superfreedraw.com Super Free Draw] (2010)
* Xavier Barrade: [http://www.epicexquisitecorpse.com/ Epic Exquisite Corpse] (2011)
* Aaron Koblin: [http://www.exquisiteforest.com/ This Exquisite Forest] (2012)
* Ai Weiwei and Olafur Eliasson: [http://www.moonmoonmoonmoon.com/ Moon] (2013)

=== Connection Games ===
* Wikipedia: [[wikipedia:Hex_(board_game)|Hex Board Game]]
* Cameron Browne: ''Connection Games: Variations on a Theme'' (2003) — ISBN 978-1568812243
* John Conway: ''Winning Ways for Your Mathematical Plays'' (1982) — [https://lhwei.gbv.de/FAM?PPN=031635741 Gewinnen: Strategien für mathematische Spiele]

=== Tiling Systems ===
* Dominique Douat: [https://github.com/bitcraftlab/10PRINT/raw/master/lit/douat.pdf Méthode pour faire une infinité de desseins differens] (1722)
* Keith Haring: [https://twitter.com/bitcraftlab/status/697814780753616897 Drawings for Multiple Figures from 8 Seperate Tiles] (1982)
* BoardGame Geek: [https://boardgamegeek.com/geeklist/54579/games-inspired-truchet-tiles Games inspired by Truchet Tiles]

=== Reading Lists ===
* [http://www.flong.com/blog/2014/computing-without-computers/ Computing without Computers]
* [https://socialmediacollective.org/reading-lists/critical-algorithm-studies/ Critical Algorithm Studies Reading List]

-----
== Random Walks ==

[[File:john-venn-pi-walk.png|400px|thumb|left|John Venn [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance] (1888) ]]

 

=== About ===
In this class we will learn how to use randomness to create curves.

=== Goals ===
* Learn to use and create functions in processing
* Basics of determinism, randomness and pseudo-randomness
* Learn about random distributions
* Learn about noise functions

=== Code ===
* From our Class
** Connect Random Points + Custom Random Function — [https://codepen.io/bitcraftlab/details/mOyayr/ CodePen]
* Nature of Code : [http://natureofcode.com/book/introduction/ Introduction] to Randomness by Daniel Shiffman
** Random Walk Tutorial — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/sketch.js Code]
** Random Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/sketch.js Code]
** Random Walk tends to the right — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/sketch.js Code]
** Gaussian Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/sketch.js Code]
** Noise Walk — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_05_NoiseWalk/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/tree/master/introduction/NOC_I_05_NoiseWalk/sketch.js Code]
** 1 dimensional noise — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/sketch.js Code]

=== Links ===
* [http://walks.carma.newcastle.edu.au/ Walking on Real Numbers]
* [http://www.random-walk.com/ Visualizing Randomness] (Anti-Dataviz)

==== Art ====
* [http://cyberneticzoo.com/mazesolvers/1952-%E2%80%93-theseus-maze-solving-mouse-%E2%80%93-claude-shannon-american/ Claude Shannon's Theseus] in [https://books.google.de/books?id=3VUEAAAAMBAJ&pg=PA45 in Live Magazine] and [http://cyberneticzoo.com/wp-content/uploads/2010/04/Shannon-Maze-PopSci_Mar19521.pdf Popular Science]
* [https://www.flickr.com/groups/roomba/pool/ Roomba Art Pool] on Flickr
* [https://www.flickr.com/photos/sergioalbiac/albums/72157625497147722 Drawn not Void] by Sergio Albiac (2010)

==== Science ====
* [http://electronics.howstuffworks.com/gadgets/home/robotic-vacuum.htm/printable How Robotic Vacuums work]

GMU:Meandering through Space/Part1

2016-11-07T09:42:01Z

Ms: Add codepen

= Meandering Curves =

-----
== Introduction ==

[[File:meander-construction-stuebel.jpg|400px|thumb|left|[https://archive.org/stream/mhaanderkreuze00heinrich#page/13/mode/1up Meander Construction] by Symmetry Breaking (Stübel)]]

 

=== About ===
This lecture provides an overview of the course and meanders through space and time.

=== Goals ===
* Overview of the course
* History of meanders in nature and design
* Basic understanding of generative coding
* Basic understanding of self organisation

=== Inspiration ===

==== Nature ====
* Harold Fisk: [http://www.radicalcartography.net/index.html?fisk Mississippi Maps] (1944)
* Daniel E. Coe: [http://www.oregongeology.org/pubs/ll/p-poster-willamette.htm Willamette River, Oregon] (2013)

==== Culture ====
* Alois Raimund Hain: [https://archive.org/details/mhaanderkreuze00heinrich Mäander, Kreuze, Hakenkreuze] (1852)
* Owen Jones: [https://archive.org/stream/grammarornament00Jone#page/XV/mode/1up The Grammar of Ornament ] (1856)
* koFactorLab: [http://lab.kofaktor.hr/en/portfolio/super-flexible-laser-cut-plywood/ Super-Flexible Laser-Cut Plywood] (2015)

==== Art ====
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide2 Red Meander] (1954)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide7 Intersecting] (1962)
* Anni Albers: [http://www.albersfoundation.org/art/anni-albers/weavings/#slide5 Under Way] (1963)
* Wilson Thomas: [http://luc.devroye.org/WilsonThomas--Tramarada--2011.png Tramarada Font] (2011)

=== Literature ===
==== Meanders ====
* Hans-Henrik Stølum: [http://raaf.org/pdfs/meandering_river.pdf River Meandering as a Self-Organization Process] (1996)
* Jeffrey Ventrella: [https://archive.org/details/BrainfillingCurves-AFractalBestiary Brain-filling Curves: A fractal Bestiary] (2012)
* Jenny Sabin: [http://viewer.zmags.com/publication/05726862 Meander: Variegating Architecture] (2010) — ISBN 978-0415424271

==== Lines ====
* Tim Ingold: ''Lines: a brief history'' (2007) — ISBN 978-0415424271 (hint: [https://www.google.de/#q=Lines:+a+brief+history google it])
* Wassily Kandisky: ''[http://bibliothequekandinsky.centrepompidou.fr/imagesbk/RLPF728/M5050_X0031_LIV_RLPF0728.pdf Punkt und Linie zu Fläche]'' (1926)

==== Labyrinths and Mazes ====
* William Henry Matthews: [https://archive.org/details/mazeslabyrinthsg1922matt Mazes and Labyrinths: A general Account of their History and Developments] (1922)
* Herrmann Kern: ''Labyrinthe'' (1999) — ISBN 978-3791306148
* Sam McElhinney: ''[https://www.dropbox.com/s/d4h2mh6kmg0tbu7/McElhinney-Labyrinths_Mazes_and_the_Spaces_Inbetween.pdf Labyrinths, Mazes and the Spaces inbetween]'' (2009)
* Casey Reas: [http://10print.org/ 10 PRINT] (2012) — ISBN 978-0819426529 or [http://trope-tank.mit.edu/10_PRINT_121114.pdf PDF]

==== Science ====
* E.Gail Hutchinson and Janet M.Thornton: [http://peds.oxfordjournals.org/content/6/3/233.full.pdf The Greek key motif: extraction, classification and analysis] (1993)

-----
== Collaborative Drawing ==

{{#ev:youtube|CTn4FE3b8DQ|400|left|Studio Moniker: Conditional Design Workshop|frame}}

 

=== About ===
In this lecture we will draw curves using everything from paper to online tools.

=== Goals ===
* Learn about algorithms
* Learn about constraints
* Design your own algorithm

=== Sol Lewitt ===

Sol Lewitt's [http://www.thegundgallery.org/2013/07/sol-lewitt/ Walldrawing] from the Do It Exhibition (2001):

:''A black not straight line is drawn at approximately the center of the wall horizontally from side to side.''
:''Alternate red, yellow and blue lines are drawn above and below the black line to the top and bottom of the wall''

More walldrawings in this [http://massmoca.org/sol-lewitt/ retrospective].

=== Conditional Design ===
* Studio Moniker: [https://conditionaldesign.org Conditional Design Website]
* Studio Moniker: [https://www.youtube.com/watch?v=CTn4FE3b8DQ Conditional Design Workshop] (2013)
* Studio Moniker: [https://vimeo.com/channels/gdfbtv/12260671 Conditional Design Keynote] (2015)

=== Hypercomics ===
* Ted Nelson: [https://www.google.de/#q=computer+lib+dream+machines Computer Lib / Dream Machines] (1974) feat. [https://twitter.com/bitcraftlab/status/773977855604719616 Hypercomics]
* Scott McCloud: [http://scottmccloud.com/4-inventions/canvas/ Infinite Canvas] (2009)

=== Collaborative Canvas ===
* Wikipedia: [[wikipedia:Exquisite Corpse|Exquisite Corpse]]
* Hannes Niepold und Hans Wastlhuber: [http://www.cointel.de/index1.html cOiNTEL] (2000) — a collaborative hypercomic
* Ralph Schulz: [http://www.superfreedraw.com Super Free Draw] (2010)
* Xavier Barrade: [http://www.epicexquisitecorpse.com/ Epic Exquisite Corpse] (2011)
* Aaron Koblin: [http://www.exquisiteforest.com/ This Exquisite Forest] (2012)
* Ai Weiwei and Olafur Eliasson: [http://www.moonmoonmoonmoon.com/ Moon] (2013)

=== Connection Games ===
* Wikipedia: [[wikipedia:Hex_(board_game)|Hex Board Game]]
* Cameron Browne: ''Connection Games: Variations on a Theme'' (2003) — ISBN 978-1568812243
* John Conway: ''Winning Ways for Your Mathematical Plays'' (1982) — [https://lhwei.gbv.de/FAM?PPN=031635741 Gewinnen: Strategien für mathematische Spiele]

=== Tiling Systems ===
* Dominique Douat: [https://github.com/bitcraftlab/10PRINT/raw/master/lit/douat.pdf Méthode pour faire une infinité de desseins differens] (1722)
* Keith Haring: [https://twitter.com/bitcraftlab/status/697814780753616897 Drawings for Multiple Figures from 8 Seperate Tiles] (1982)
* BoardGame Geek: [https://boardgamegeek.com/geeklist/54579/games-inspired-truchet-tiles Games inspired by Truchet Tiles]

=== Reading Lists ===
* [http://www.flong.com/blog/2014/computing-without-computers/ Computing without Computers]
* [https://socialmediacollective.org/reading-lists/critical-algorithm-studies/ Critical Algorithm Studies Reading List]

-----
== Random Walks ==

[[File:john-venn-pi-walk.png|400px|thumb|left|John Venn [https://archive.org/stream/logicofchance029416mbp#page/n153/mode/1up The Logic of Chance] (1888) ]]

 

=== About ===
In this class we will learn how to use randomness to create curves.

=== Goals ===
* Learn to use and create functions in processing
* Basics of determinism, randomness and pseudo-randomness
* Learn about random distributions
* Learn about noise functions

=== Code ===
* From our Class
** Connect Random Dots + Custom Random Function — [https://codepen.io/bitcraftlab/details/mOyayr/ CodePen]
* Nature of Code : [http://natureofcode.com/book/introduction/ Introduction] to Randomness by Daniel Shiffman
** Random Walk Tutorial — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_01_RandomWalkTraditional/sketch.js Code]
** Random Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_02_RandomDistribution/sketch.js Code]
** Random Walk tends to the right — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_03_RandomWalkTendsToRight/sketch.js Code]
** Gaussian Distribution — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_04_Gaussian/sketch.js Code]
** Noise Walk — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/NOC_I_05_NoiseWalk/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/tree/master/introduction/NOC_I_05_NoiseWalk/sketch.js Code]
** 1 dimensional noise — [https://htmlpreview.github.io/?https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/index.html Preview] + [https://github.com/shiffman/The-Nature-of-Code-Examples-p5.js/blob/master/introduction/Noise1D/sketch.js Code]

=== Links ===
* [http://walks.carma.newcastle.edu.au/ Walking on Real Numbers]
* [http://www.random-walk.com/ Visualizing Randomness] (Anti-Dataviz)

==== Art ====
* [http://cyberneticzoo.com/mazesolvers/1952-%E2%80%93-theseus-maze-solving-mouse-%E2%80%93-claude-shannon-american/ Claude Shannon's Theseus] in [https://books.google.de/books?id=3VUEAAAAMBAJ&pg=PA45 in Live Magazine] and [http://cyberneticzoo.com/wp-content/uploads/2010/04/Shannon-Maze-PopSci_Mar19521.pdf Popular Science]
* [https://www.flickr.com/groups/roomba/pool/ Roomba Art Pool] on Flickr
* [https://www.flickr.com/photos/sergioalbiac/albums/72157625497147722 Drawn not Void] by Sergio Albiac (2010)

==== Science ====
* [http://electronics.howstuffworks.com/gadgets/home/robotic-vacuum.htm/printable How Robotic Vacuums work]