Fachzeitschriften und Tagungsbände

Fachzeitschriften und Tagungsbände

2018

Göbel, L., Mucha, F., Kavrakov, I., Abrahamczyk, L., Kraus, M.: Einfluss realer Materialeigenschaften auf numerische Modellvorhersagen: Fallstudie Betonmast, Bautechnik 95(2), 2018. (pdf-file)

Marwitz, S., Zabel, V., Könke, C.: Modalanalyse von Monitoringdaten eines
Sendeturms, Bautechnik 95(4), 2018. (pdf-file)

Dragos, K., Steiner, M., Zabel, V., Smarsly, K.: Monitoringgestützte Analyse von Schwingungsdämpfern in Turmbauwerken, Bautechnik 95(6), 2018. (pdf-file)

Abrahamczyk, L., Jaouadi, Z., Kähler, U., Legatiuk, D.: Methoden zur Identifikation von Zugvorbeifahrten aus kontinuierlichen Messdaten, Bautechnik 95(7), 2018. (pdf-file)

 

2017

Abbas, T., Kavrakov, I., Morgenthal, G.: Methods for Flutter Stability Analysis of Long-span Bridges: A Review, Proceedings of the ICE - Bridge Engineering, Volume 170 Issue 4, pp. 271-310, 2017.

Badawy, M.F., Msekh, M.A., Hamdia, K.M., Steiner, M., Rabczuk, T.: Hybrid nonlinear surrogate models for fracture behavior of polymeric nanocomposites using phase field model, Journal of Probabilistic Engineering Mechanics, accepted, 2017.

Bock, S.: On a hypercomplex version of the Kelvin solution in linear elasticity, Modern Problems in Applied Analysis, 2017, accepted for publication.

Ghorashi, SSh., Rabczuk, T.: Goal-oriented error estimation and mesh adaptivity in 3d elastoplasticity problems, International Journal of Fracture, Volume 203, Issue 1-2, pp. 3-19, 2017.

Göbel, L., Lahmer, T., Osburg, A.: Uncertainty analysis in multiscale modeling of concrete based on continuum micromechanics; European Journal of Mechanics - A/Solids, 65C:14-29, 2017

Gürlebeck, K., Hofmann, D., Legatiuk, D.: Categorical approach to modelling and to coupling of models, Mathematical Methods in the Applied Sciences, Volume 40, Issue 3, pp. 523-534, 2017.

Gürlebeck, K., Legatiuk, D.: Three-dimensional interpolation with monogenic polynomials, Complex
Variables and Elliptic Equations, 2017.

Kavrakov, I., Morgenthal, G.: A comparative assessment of aerodynamic models for buffeting and flutter of long-span bridges, Engineering, accepted, 2017.

Lahmer, T., Bock, S., Hildebrand, J., Gürlebeck, K.: Non-destructive identification of residual stresses in steel under thermal loadings, Inverse Problems in Science and Engineering, Volume 25, Issue 10, pp. 1519-1535, 2017.

Marwitz, S., Zabel, V.: An experimental evaluation of two potential improvements for 3D laser vibrometer based operational modal analysis, An International Journal of the Society of Experimental Mechanics, 57:1311–1325, 2017.

Rau, S., Morgenthal, G.: An assessment framework for sensor-based detection of critical structural conditions with consideration of load uncertainty, Structures, Volume 12, p. 168-178, 2017.

Rau, S., Morgenthal, G., Taraben, J., Abbas, T.: Determination of stay cable forces using highly mobile vibration measurement devices, Journal of Bridge Engineering, accepted, 2017.

Abrahamczyk, L., Al Hanoun, M.H., Peneva, D, Schwarz, J.: Vertrauenswürdigkeit nichtlinearer Analysen: Rahmentragwerke unter Erdbebeneinwirkungen. Baustatik-Baupraxis 13, Ruhr-Universität Bochum, Bochum, Germany, 2017.

Al Hanoun, M.H., Abrahamczyk, L., Schwarz, J.: Numerical simulation of RC frames structures with infill walls under consideration of out-of-plane behavior, 16th World Conference on Earthquake Engineering (WCEE), Santiago, Chile, 9-13 January 2017, Paper-No. 4917.

Bock, S.: On monogenic functions with line singularities, AIP Conference proceedings of the 17th International Conference on Computational and Mathematical Methods in Science and Engineering, CMMSE 2017, 4-8 July, Cadiz (Spain), 2017.

Bock, S.: On generalized Kolosov-Muskhelishvili formulae for the finite cylinder, AIP Conference proceedings, 2017, accepted for publication.

Dragos, K., Smarsly, K.: An embedded algorithm for detecting and accommodating synchronization problems in wireless structural health monitoring systems, Proceedings of the 24rd International Workshop on Intelligent Computing in Engineering (EG-ICE). Nottingham, UK, 2017.

Grigor'ev, Yu., Gürlebeck, K., Legatiuk, D.: Interpolation problem for the solutions of linear elasticity equations based on monogenic functions, AIP Conference proceedings 1907, 030054, 2017.

Grigor'ev, Yu., Gürlebeck, K., Legatiuk, D.: Quaternionic formulation of a Cauchy problem for the Lame equation, AIP Conference proceedings, accepted, 2017.

Göbel, L., Bos, C., Schwaiger, R., Osburg, A.: Micromechanics-based prediction of the elastic properties of polymer-modified cementitious materials, FIB Symposium, Maastricht, The Netherlands, 2017.

Göbel, L., Pichler, B., Osburg, A.: Early-age experimental characterization and semi-analytical modeling of elasticity and creep of polymer-modified cement pastes, Second International RILEM Conference On Early-Age Cracking and Serviceability in Cement-based Materials and Structures, Brussels, Belgium, 2017.

Göbel, L., Osburg, A., Bos, C., Schwaiger, R.: Entwicklung eines semi-analytischen Multiskalenmodells für polymermodifizierten Beton, Tagung Bauchemie, Weimar, Germany, 2017.

Legatiuk, D., Dragos, K., Smarsly, K.: Modeling and evaluation of cyber-physical systems in civil engineering, Proceedings in Applied Mathematics and Mechanics, 2017.

Legatiuk, D., Nilsson, H.: Abstract modelling: towards a typed declarative language for the conceptual modelling phase. Proceedings of 8th International Workshop on Equation-Based Object-Oriented Modeling Languages and Tools, Munich, Germany, December 2017 (EOOLT 2017).

Legatiuk, D., Theiler, M., Dragos, K., Smarsly, K.: A categorical approach towards metamodeling cyberphysical systems, Proceedings of the 11th International Workshop on Structural Health Monitoring, 2017.

Marwitz, S., Habtemariam, A., Zabel, V.: Betrachtung von Unsicherheiten in der Modalanalyse mit der
Stochastic Subspace Identification am Beispiel eines seilabgespannten Masts, Tagungsband der 15. D-ACH Tagung Erdbebeningenieurwesen und Baudynamik, 2017.

Marwitz, S., Zabel, V.: Cross-evaluation of two measures for the assessment of estimated state-space systems in operational modal analysis, Proceedings of the 7th International Operational Modal Analysis
Conference, pp. 253-256, 2017.

Marwitz, S., Zabel, V., Könke, C.: Automatisierte Modalanalyse und Langzeitmonitoring eines rotationssymmetrischen Turmtragwerks, Baustatik-Baupraxis 13, pp. 165 – 172, 2017.

Smarsly, K., Theiler, M., Dragos, K.: IFC-based modeling of cyber-physical systems in civil engineering, Proceedings of the 24th International Workshop on Intelligent Computing in Engineering (EG-ICE). Nottingham, Vereinigtes Königreich, 2017.

Steiner, M., Lahmer, T., Bourinet, J.-M.: Investigation of a global adaptive sampling method based on leastsquares support vector regression, Proceedings of the GRK International Workshop, Weimar, Germany, 2017.

Theiler, M., Dragos, K., Smarsly, K.: BIM-based design of structural health monitoring systems, Proceedings of the 11th International Workshop on Structural Health Monitoring (IWSHM). Stanford, CA, USA, 2017.

 

2016

Abbas, T., Morgenthal, G.: Framework for sensitivity and uncertainty quantification in the flutter assessment of bridges, Probabilistic Engineering Mechanics Volume 43, pp. 91-105, 2016.

Bock, S., Gebhardt, T., Hildebrand, J., Schwarz, W., Almamou, S., Herzog, S.: Qualitätskontrolle von Ingenieurkonstruktionen durch terrestrisches Laserscanning, Allgemeine Vermessungs- Nachrichten (avn), 123:8-9, pp. 239-252, 2016.

Dragos, K., Smarsly, K.: Distributed adaptive diagnosis of sensor faults using structural response data, Smart Materials and Structures, 25(10), 105-119, 2016.

Dragos, K., Smarsly, K.: Decentralized infrastructure health monitoring using embedded computing in wireless sensor networks, Sextos, A. & Manolis, G. D. (eds.). Dynamic Response of Infrastructure to Environmentally Induced Loads. Cham, Schweiz: Springer International Publishing AG, 2016.

Ghorashi, SSh., Lahmer, T., Bagherzadeh, A.S., Zi, G., Rabczuk, T.: A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials, Engineering Geology, 2016.

Gürlebeck, K., Kähler, U., Legatiuk, D.: Error estimates for the coupling of analytical and numerical solutions, Complex Analysis and Operator Theory, Volume 11, Issue 5, pp. 1221-1240, 2016.

Gürlebeck, K., Legatiuk, D.: On some properties of pseudo-complex polynomials, Modern Trends in
Hypercomplex Analysis, Trends in Mathematics, pp. 217–226, 2016.

Huber, M.: Reducing forecast uncertainty by using observations in geotechnical engineering, Probabilistic Engineering Mechanics, Vol. 45, pp. 212–219, 2016.

Marzban, S., Lahmer, T.: Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects, Journal of Statistical Theory and Practice 10(4), pp. 589-611, 2016.

Morgenthal, G., Olney, P.: Concrete hinges and integral bridge piers, ASCE Journal of Bridge Engineering, Vol. 21, Issue 1, January 2016.

Motra, H.B., Hildebrand, J., Wuttke, F.: Monte Carlo method for the evaluation of measurement uncertainty: application to determine material properties, Probabilistic Engineering Mechanics, Vol. 45, pp. 220-228, 2016.

Motra, H.B., Stutz, H., Wuttke, F.: Quality assessment of soil bearing capacity factor models of shallow foundations, Soils and Foundations, Vol. 56, Issue 2, pp. 265 – 276, 2016.

Scheiber, F., Motra, H.B., Legatiuk, D., Werner, F.: Uncertainty-based evaluation and coupling of mathematical and physical models, Probabilistic Engineering Mechanics, Volume 45, pp. 52-60, 2016.

Chowdhury, S., Zabel, V.: Monitoring of a bridge gusset plate during crack propagation with different measurement systems, 8th European Workshop on Structural Health Monitoring (EWSHM 2016), 5-8 July 2016, Spain, Bilbao.

Dragos, K.: An embedded physics-based modeling approach for wireless structural health monitoring systems, Forum Bauinformatik. Hannover, 2016.

Dragos, K., Jahr, K., Smarsly, K.: Nonlinear sensor fault diagnosis in wireless sensor networks using structural response data, The 23rd International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE). Krakow, Poland, 2016.

Dragos, K., Smarsly, K.: A hybrid system identification methodology for wireless structural health monitoring systems based on dynamic substructuring, The SPIE Smart Structures/NDE Conference: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Las Vegas, NV, USA, 2016.

Göbel, L., Mucha, F., Jaouadi, Z., Kavrakov, I., Legatiuk, D., Abrahamczyk, L., Kraus, M., Smarsly, K.: Monitoring the structural response of reinforced concrete poles along high-speed railway tracks, Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering, 22-24 August 2016, Lyngby, Denmark.

Göbel, L., Osburg, A., Lahmer, T.: Assessment of a continuum micromechanics-based multiscale model for concrete by means of sensitivity analysis and uncertainty propagation, VII European Congress on Computational Methods in Applied Sciences and Engineering, Editors: M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris, Volume IV, Crete Island, Greece, 2016.

Kavrakov, I.: Numerical models for buffeting and flutter analysis of bridges in erection stage, Proceeding of the Young Engineers Colloquium, Hamburg, Germany, 2016.

Kavrakov, I., Ibrahim, K., Morgenthal, G.: Comparative study of semi-analytical and numerical methods for aerodynamic analysis of long-span bridges, Proceedings of the 8th BBAA Colloquium, Boston, USA, 2016.

Kavrakov, I., Morgenthal, G.: Modelling techniques for buffeting analysis of long-span bridges, IABSE
Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report, pp. 221-228.

Kavrakov, I., Morgenthal, G., Camara, A.: Influence of aerodynamic model assumptions on the windvehicle-bridge interaction, IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, pp. 1165-1172.

Khosravian, R., Steiner, M., Könke, C.: Parametric study on the effects of catenary cables and soilstructure interaction on dynamic behavior of pole structures using the finite elements method, Proceedings of the 7th International Conference on Computational Methods, Berkeley, CA, USA, 2016.

Marwitz, S., Zabel, V.: Operational modal analysis with a 3D laser vibrometer without external reference, Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016, pp. 75 – 85, 2016.

Nasr, A., Dehshahri, F., Miculas, C. V., Ficker, K., Azari, S., Afghan, H., Dragos, K., Smarsly, K.: A distributed-collaborative modal identification procedure for wireless structural health monitoring systems, Abrahamczyk, L. & Schwarz, J. (eds.), Forecast Engineering: From Past Design to Future Decision, Weimar: Bauhaus-Universität Weimar, 2016.

Smarsly, K., Dragos, K., Wiggenbrock, J.: Machine learning techniques for structural health monitoring, 8th European Workshop on Structural Health Monitoring (EWSHM) 2016. Bilbao, Spain.

 

2015

Bayat M, Ghorashi SSh, Amani J, Andesren LV, Ibsen LB, Rabczuk T, Zhuang X, Talebi H. Recovery based error estimation in dynamic analysis of offshore wind turbine monopile foundations. Computers and Geotechnics, 2015.

Ghorashi SSh, Valizadeh N, Mohammadi S, Rabczuk T. T-spline based XIGA for Fracture Analysis of Orthotropic Media. Computers & Structures 2015; 147, 138-146. doi: 10.1016/j.compstruc.2014.09.017

Dragos, K. & Smarsly, K., Decentralized infrastructure health monitoring using embedded computing in wireless sensor networks. In: Sextos, A. & Manolis, G. D. (eds.). Dynamic Response of Infrastructure to Environmentally Induced Loads. Cham, Switzerland: Springer International Publishing AG (submitted)

Dragos, K., Thessmann, G., Fathy, M., Wang, S., Liang, Y.,Tauscher, E. & Smarsly, K., An embedded computing approach for modular wireless structural health monitoring systems. In: Abrahamczyk, L. & Schwarz, J. (eds.). Forecast Engineering: Global Climate change and the challenges for built environment. Weimar, Germany: Bauhaus University Weimar, Faculty of Civil Engineering, Institute of Structural Engineering.

Jahr, K., Schlich, R., Dragos, K. & Smarsly, K., Decentralized autonomous fault detection in wireless structural health monitoring systems using structural response data. In: Proceedings of the 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering (IKM). Weimar, Germany, 07/22/2015.

Dragos, K., 2015, Embedded models in wireless sensor nodes for decentralized condition assessment of civil engineering structures. In: Proceedings of the 27th Forum Bauinformatik. Aachen, Germany, 09/21/2015

Jahr, K., Dragos, K. & Tauscher, E., An analytical redundancy approach towards decentralized autonomous fault detection in wireless structural health monitoring. In: Proceedings of the 27th Forum Bauinformatik. Aachen, Germany, 09/21/2015.

Dragos, K. & Smarsly, K., Embedding numerical models into wireless sensor nodes for structural health monitoring. In: Proceedings of the 10th International Workshop on Structural Health Monitoring (IWSHM). Stanford, CA, USA, 09/01/2015.

Dragos, K. & Smarsly, K., A Comparative Review of Wireless Sensor Nodes for Structural Health Monitoring. In: Proceedings of the 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Turin, Italy, 07/01/2015

M. Steiner, R. Khosravian, T. Lahmer, ”Best Use of Metamodels for Data Derived from Civil Engineering Applications”, in Y. Tsompanakis, J. Kruis, B.H.V. Topping, (Editors), ”Proceedings of the Fourth International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering”, Civil-Comp Press, Stirlingshire, UK, Paper 1, 2015. doi:10.4203/ccp.109.1

I. Kavrakov, H.-G. Timmler, G. Morgenthal. Structural Optimization using the Energy Method with Integral Material Behaviour. IKM, Weimar, Germany, 2015.

I. Kavrakov, H.-G. Timmler, G. Morgenthal, Structural Optimization of Composite Structures using an Energy Method. IABSE - Geneva, Switzerland, 2015.

Maria Steiner, Reza Khosravian, Tom Lahmer, Quality of Estimated Sensitivity Indices Based on Metamodels. The 13th International Probabilistic Workshop, Liverpool, UK, 2015

Reza Khosravian, Frank Wuttke, Qualitative Investigation of the Effect of Soil Modeling Approach on Dynamic Behavior of a Small-Scale 2-DOF Structure with Pile Foundation. Proceedings of 20th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, 2015.

Göbel, L.; Osburg, A.; Lahmer, T., Study of analytical models of the mechanical behavior of polymer-modified concrete. Proceedings of 20th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, 2015.

S. Marzban, J. Schwarz, L. Abrahamczyk, and T. Lahmer. Experience- Based Uncertainty Assessment of Yield Displacement Estimates for Re- inforced Concrete Walls. Journal of Probabilistic Engineering Mechanics, 2015. Submitted.

S. Bock, K. Gürlebeck, D. Legatiuk, H. M. Nguyen, ψ-Hyperholomorphic Functions and a Kolosov-Muskhelishvili Formula. Mathematical Methods in the Applied Sciences, 2015. DOI: 10.1002/mma.3431

I. Wudtke, H. Talebi, M. Silani, F. Werner, A hierarchical multi-scale approach to mechanical characterization of heat affected zone in welded connections. Computation Materials Science, 2015.

I. Reichert, P. Olney, T. Lahmer, V. Zabel, Comparison of Different Approaches for the Model-Based Design of Experiments, IMAC XXXIII Florida, 2015.

 

2014

F. Scheiber, H.B. Motra, D. Legatiuk, F. Werner, Model coupling in structural engineering application. Proceedings of the International Probabilistic Workshop 2014, Weimar, 2014.

K. Gürlebeck, U. Kähler, D. Legatiuk, Interpolation problem arising in a coupling of finite element method with holomorphic basis functions. AIP Conference proceedings, accepted, 2014.

S. Marzban and A. Azarbakht. Influence of the Axial Load Ratio on the Fragility Functions for RC Walls. In Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM2014) & Sixth International Symposium on Uncertainty Modelling and Analysis (ISUMA2014), 2014.

D. Legatiuk and H.M. Nguyen, Improved convergence results for the finite element method with holomorphic functions. Advances in Applied Cli
ord Algebra, 2014. DOI: 10.1007/s00006-014-0501-1

K. Gürlebeck, H.M. Nguyen and D. Legatiuk, An additive decomposition of harmonic functions in . Lecture Notes in Computer Science Vol. 8579, pp. 189-204, 2014.

Klaus Gürlebeck and Dmitrii Legatiuk, On the continuous coupling of finite elements with holomorphic basis functions. Hypercomplex Analysis: New perspectives and applications, ISBN 978-3-319-08770-2, Birkhäuser, Basel, 2014.

S. Chowdhury, P. Olney, M. Deeb, V. Zabel, K. Smarsly, Quality Assessment Of Dynamic Response Measurements Using Wireless Sensor Networks: Preliminary Results, 7th EWSHM in Nantes, 2014.

G. Morgenthal, P. Olney, New Findings on Bamboo-concrete Composite Slabs, IABSE Madrid, 2014.

P. Olney, G. Morgenthal, T. Lahmer, Model based design of experiments and monitoring systems for parameter identification of structures, IABSE Madrid, 2014.

P. Olney, I. Stade, M. Deeb, Approximate Distributions of Dynamic Properties Identified from Vibration Measurements on Identical Pole Structures, METNET Moscow, 2014.

I. Reichert, P. Olney, T. Lahmer, Comparison of different model-based design of experiment approaches under moderate errors, IPW Weimar, 2014.

S. Marzban, J. Schwarz, and L. Abrahamczyk. Experience-Based Assess- ment of Yield Displacement Estimates for Reinforced Concrete Walls. In 12th International Probabilistic Workshop, Weimar, Germany, November 4-5 2014.

S. Chowdhury, M. Deeb, V. Zabel, Reliability based quality assessment for fatigue crack growth models. 12th International Probabilistic Workshop, Weimar, Germany, November 4-5, 2014.

S. Chowdhury, Parameter estimation of different fatigue crack growth models. METNET, 9th International seminar, Moscow, Russia, 2014, October 21 - 22, 2014.

V. Zabel, S. Chowdhury, Investigation of remaining fatigue life of a riveted steel railway bridge with different practical approaches. 14th Bilateral German-Czech symposium `Experimental Methods and Numerical Simulation in Engineering Sciences', Wuppertal, Germany, June 4-7, 2014.

H. Keitel, B. Jung, H.B. Motra, H. Stutz, Quality Assessment of Coupled Partial Models Considering Soil-Structure Coupling. In: Engineering Structures 59 (2014), 565-573.

H.B. Motra, J. Hildebrand, A. Dimmig-Osburg, Influence of specimen dimensions and orientations on the tensile properties of structural steel. In: Material Testing, Vol. 56, No. 11-12, (2014), 929-936.

H.B. Motra, J. Hildebrand, A. Dimmig-Osburg, Assessment of Strain Measurement Techniques to Characterize Mechanical Properties of Structural Steel. In: Engineering Science and Technology, an International Journal, Vol. 17 (2014), 260-269.

H.B. Motra, A. Dimmig-Osburg, J. Hildebrand, Quality assessment of models with an application to cyclic creep prediction of concrete. In: International Journal of Reliability and Safety, Accepted for publication.

H.B. Motra, J. Hildebrand, A. Dimmig-Osburg, T. Lahmer, Reliability of Measurement Results for Materials Testing. In: Proceedings of 12th International Probabilistic Workshop, IPW2014, 4th-5th November 2014, Weimar, Germany.

S. Marzban, A. Almasi, and J. Schwarz, Reinforced Concrete Structural Wall Database Development for Model Validation. In 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August 25-29 2014

S. Marzban and A. Azarbakht, Influence of the Axial Load Ratio on the Fragility Functions for RC Walls. In Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM2014) & Sixth International Symposium on Uncertainty Modelling and Analysis (ISUMA2014), 2014.

I. Stade, C. Guist, C. Könke, T. Richter, Assessment of image-based FE models in structural dynamics. Proceedings of the International Conference on Noise and Vibration Engineering (ISMA) 2014, Leuven, 15 - 17 September 2014.

I. Stade, C. Könke, Generation of numerical simulation models in structural dynamics from computed tomography image data. Proceedings of the METNET Seminar 2014 in Moscow, Moskau, 2014.

M. Deeb, I. Stade, V. Zabel, C. Könke, Uncertainty quantification of damping based on free vibration decay testing and Bayesian model updating. Proceedings of 12th International Probalistic Workshop, Weimar 2014.

SSh. Ghorashi, N. Valizadeh, S. Mohammadi, T. Rabczuk, T-spline based XIGA for Fracture Analysis of Orthotropic Media. Computers & Structures, 138-146. doi: 10.1016/j.compstruc.2014.09.017

Y. Jia, C. Antisecu, SSh. Ghorashi, T. Rabczuk. Extended Isogeometric Analysis for Material Interface Problems, IMA Journal of Applied Mathematics, 2014. doi:10.1093/imamat/hxu004

SSh. Ghorashi, J. Amani, AS. Bagherzadeh, T. Rabczuk, Goal-Oriented Error Estimation and Mesh Adaptivity in Three-Dimensional Elasticity Problems. WCCM XI - ECCM V - ECFD VI, Barcelona, Spain, 2014.

 

2013


S. Marzban and T. Lahmer. Variance-Based Sensitivity Analysis: The Method of Slices. Reliability Engineering and System Safety, 2013. Sub- mitted.

T. Abbas, G. Morgenthal, Quantification of the Effects of Turbulence in Wind on the Vortex-induced Vibrations, Conference: 36th IABSE Symposium, Kolkata, India. September 24-27, 2013 ,Long Span Bridge and Roof Structures - Development, Design and Implementation, Conference: 36th IABSE Symposium, Kolkata, India, September 24-27, 2013.

S. Marzban, M. Leipold, and J. Schwarz. An Investigation into the Sen- sitivity Properties of the Global Response of Reinforced Concrete Struc- tural Walls. In 14th International Conference on Civil, Structural and Environmental Engineering Computing, Cagliari, Italy, September 3-6 2013.

T. Abbas, G. Morgenthal, Quantification of the Effects of Turbulence in Wind on the Flutter Stability of Suspension BridgesConference: European and African Conference on Wind Engineering Cambridge, UK, July 7-11, 2013.

H. Stutz, T. Benz, F. Wuttke, Numerical investigation of the artificial stiffness scaling in zero thickness interface elements for soil- structure interactionCC2013: The Fourteenth International Conference on Civil, Structural and Environmental Engineering Computing (Accepted / Submissiondate: 8-05-2013)

H. Keitel, B. Jung, H.B. Motra, H. Stutz, Assessment of prognosis quality of coupled partial models considering soil-structure coupling, Preprint submitted to Engineering Structures, 22-04-2013.

D. Legatiuk, K. Gürlebeck, G. Morgenthal, Modelling of concrete hinges through coupling of analytical and finite element solutions, Bautechnik Sonderdruck, ISSN 0932-8351, A 1556, April 2013.

M. Deeb, T. Abbas, S. Ghorashi, I. Stade, I. Wudtke, V. Zabel, Model-based damage identifikation of tower structures, Bautechnik, Bewertung gekoppelter numerischer Partialmodelle im konstruktiven Ingenieurbau, April 2013

B. Jung, G. Morgenthal, D. Xu, H. Schröter, Quality evaluation of material models for reinforced concrete cross-sections under consideration of their load-bearing behaviour, Preprint submitted to Engineering Structures, 14-03-2013.

Theiler, M.; Könke C. (2013): Damping in Bolted Joints. In: Proceedings of International Conference on Structural Engineering Dynamics (ICEDyn) 2013. Sesimbra, Portugal.

C. Liu, D. Xu, B. Jung, G. Morgenthal, Reinforcement design for the anchorage of externally prestressed bridges with „tensile stress region“, Computers and Concrete 11 (5) (2013).
 
B. Jung, G. Morgenthal, D. Xu, Integral bridges: sensitivity of limit state modelling, Bautechnik - Sonderdruck “Modellqualitäten” 90 (2013) 32-40.
 
H. Keitel, H. Stutz, B. Jung, H.B. Motra, Prediction quality of coupled partial models - Influence of different coupling scenarios on the soil-structure interaction, Bautechnik - Sonderdruck “Modellqualitäten” 90 (2013) 19-25.
F. Scheiber, H.B. Motra,: Tragwerksmonitoring und numerische Simulation, Bautechnik - Sonderdruck “Modellqualitäten” 90 (2013), S. 63-68.
F. Scheiber, F. Werner,: Modelle und Normen – Geometrisch nichtlineare Probleme, Bautechnik - Sonderdruck “Modellqualitäten” 90 (2013), S. 12-28.
S. Marzban and J. Schwarz, An Investigation into the Structural Interaction in RC Frame-Wall Systems, Bautechnik - Sonderdruck “Modellqualitäten” 90 :53–62, 2013.

S. Marzban, T. Lahmer, Variance-base Sensitivity Analysis: An Efficient Method of Application, Reliability Engineering and System Safety, 2013. In Preparation.

 

2012

S. Marzban, M. Banazadeh, and A. Azarbakht. Seismic Performance of RC Shear Wall Frames Considering Soil-Foundation-Structure Interaction. In 15th World Conference on Earthquake Engineering, Lisbon, Portugal, 24-28 September 2012.

Flohr, A.; Dimmig-Osburg, A. Load-deformation behaviour of hybrid elements of PCC and CC under flexural strength In: Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR), ISBN 978-0-415-89952-9, Cape Town (South Africa), 3. - 5. September 2012, Seite 490 - 491.

S. Bock, K. Gürlebeck, D. Legatiuk, On a special finite element based holomorphic functionsThe American Institute of Physics (AIP) Conference Proceedings ICNAAM 2012, Rhodes, Greece, September 2012.

S. Sh. Gorashi, N. Valizadeh, S. Mohammadi, T. Rabczuk, Extended isogeometric analysis of plates with curved cracks8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, September 2012.

S. Sh. Gorashi, N. Valizadeh, S. Mohammadi, Orthotropic enriched extended isogeometric analysis for fracture analysis of composites8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, September 2012.

N. Valizadeh, S. Sh. Gorashi, H. Yousefi, T. Q. Bui, T. Rabczuk, Transient analysis of laminated composite plates using isogeometric analysis8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, September 2012.

S. Bock, K. Gürlebeck, D. Legatiuk, The problem of coupling between analytical solution and finite element method19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

J. G. De Aguinaga, Influence of different data types for the estimation of hydromechanical parameters for a water retaining dam using synthetic data19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

M. Deeb, V. Zabel, The application of PoD curves to damage detection based on partial models - a numerical and experimental study19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

T. Abbas, Model combinations for assessing the flutter stability of suspension bridges19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

I. Wudtke, Constitutive modelling of steel with texture characteristics19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

H. Stutz, F. Wuttke, Evaluation of soil-structure interaction models using different model-robustness approaches19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

F. Scheiber, F. Werner, Robustness in civil engineering - influences of the structural model on the evaluation of structural robustness19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

O. Nechytailo, Y. Horokhov, V. Kushchenko, Analysis of the mode of deformation of the sub-polley structures on shaft sloping headgear structures19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

H. B. Motra, A. Dimmig-Osburg, J. Hildebrand, Uncertainty quantification in cyclic creep prediction of concrete19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

S. Marzban and J. Schwarz. Model Quality Evaluation Of Coupled RC Frame-Wall Systems for Global Damage Assessment. In 19th Interna- tional Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, 4-6 July 2012.

H. Keitel, Selecting an advanced creep model or a sophisticated time-integration? A new approach by means of sensitivity analysis, World Academy of Science: Engineering and Technology (Proceedings of the International Conference on Structural and Construction Engineering), 67, 564-571, July 2012.

S. Sh. Gorashi, T. Rabczuk, J. J. Rodenas, T. Lahmer, T-spline based XIGA for adaptive modelling of cracked bodies19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

B. Jung, G. Morgenthal, Global model quality evaluation of coupled partial models for restraint effects in reinforced and prestressed concrete structures, The 9th fib International PhD Symposium in Civil Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany, July 2012.

B. Jung, G. Morgenthal, Assessment of integral bridges using quantitative model evaluation19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

H. Keitel, Quantifying the quality of partial model coupling and its effect on the simulated structural behavior19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

A. Kulchytskyy, Y. Horokhov, V. Gubanov, A. Golikov, The influence of the local concavity on the functioning of bearing shell of high-rise constructions19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

T. Lahmer, S. Sh. Gorashi, Extended isogeometric analysis based crack identification applying multilevel regularizing methods19th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2012.

B. Jung, G. Morgenthal, Uncertainty analysis of tension stiffening approaches in reinforced concrete structures for the model quality evaluationfib Symposium Stockholm 2012 ,,Concrete Structures for Sustainable Community'', KTH Royal Institute of Technology, Stockholm, Sweden, June 2012.

J. G. De Aguinaga, Error in prediction due to data type availability in a coupled hydromechanical modelElectronic Journal of Geotechnical Engineering, submitted.
 
I. Engelhardt, J. G. De Aguinaga, H. Mikat, C. Schütz, O. Lenz, R. Liedl, Complexity versus simplicity: an example of groundwater model ranking with the Akaike information criterionHydrology and Earth System Sciences Discussions, 9 (8): 968-9714, 2012.
 
H.-P. Günther, J. Hildebrand, C. Rasche, C. Versch, I. Wudtke, U. Kuhlmann, M. Vormwald, F. Werner, Welded connections of high strength steels for building industryWelding in the World, 56 (5/6), 2012.
 
M. Jirásek, M. Bauer, Numerical aspects of the crack band approachComputers and Structures, 110-111: 60-78, 2012.
 
H. Keitel, Quantifying sources of uncertainty for creep models under varying stressesJournal of Structural Engineering, accepted.
 
H. Keitel, A. Dimmig-Osburg, L. Vandewalle, L. Schueremans, Selecting creep models using Bayesian methodsMaterials and Structures, 45: 1513-1533, 2012.
 
T. Knabe, H. F. Schweiger, T. Schanz, Calibration of constitutive parameters by inverse analysis for a geotechnical boundary problemCanadian Geotechnical Journal, 49 (2): 170-183, 2012.  
 
T. Knabe, M. Datcheva, T. Lahmer, F. Cotecchia, T. Schanz, Identification of constitutive parameters of soil using an optimization strategy and statistical analysisComputers and Geotechnics, submitted.
 
T. Most, Considering imprecise input parameter distribution functions in variance based sensitivity analysisReliability Engineering and System Safety, submitted.
 
H. Nguyen-Vinh, I. Bakar, M.A. Msekh, J.-H. Song, J. Muthu, G. Zi, P. Le, S. Bordas, R. Simpson, S. Natararajan, T. Lahmer, T. Rabczuk, Extended finite element method for dynamic fracture of piezo-electric materialsEngineering Fracture Mechanics, in press.
 
S. Nikulla, C. Könke, Goal-oriented model error estimation for geometrical non-linear problemsInternational Journal for Numerical Methods in Engineering, submitted.
 
M. Reuter, F. Werner, Evaluation of complex engineering models using model quality analysisEngineering Structures, 42: 410-419, 2012.
 
P. Stein, M.-C. Hsu, Y. Bazilevs, K. Beucke, Operator- and template-based modeling of solid geometry for isogeometric analysis with vertical axis wind turbine simulationComputational Methods in Applied Mechanics and Engineering, 213: 78-83, 2012.
 
 
2011

B. Jung, G. Morgenthal, H.-G. Timmler, H. Schröter, Restraint effects in reinforced and prestressed concrete structures, IABSE-IASS Symposium 2011 "Taller, Longer, Lighter", London, Great Britain, September 2011. 

G. Karaki, Influence of bridge vehicle interaction on the bridge subsystem considering road uneveness34th IABSE Symposium, Venice, Italy, September 2010.

M. Reuter, Quality and reliability of prognosis models6th European Conference on Steel and Composite Structures, Budapest, Hungary, August - September 2011.

G. D. Manolis, A. Markou, M. Nasser, Base isolation for buildings in the presence of soil structure interaction: the basic model, 7th GRACM International Congress on Computational Mechanics, Athens, Greece, June - July 2011.

G. Karaki, Investigation of bridge-vehicle interaction for highway bridges considering road uneveness8th International Conference on Structural Dynamics, Leuven, Belgium, July 2011.

T. Lahmer, C. Könke, V. Bettzieche, Optimal monitoring of gravity dams by multield considerations, ICOLD: 79th annual meeting, Lucerne, Switzerland, May - June 2011.

T. Lahmer, Systemidentifikation von Staudämmen durch korrelierte Mehrfeldanalysen, Baustatik-Baupraxis 11, Universität Innsbruck / TU Graz, February 2011.
 
S. Bock, On a three dimensional analogue to the holomorphic z-powers: Power series and recurrence formulaeComplex Variables and Elliptic Equations, 2011.


S. Bock, On a three dimensional analogue to the holomorphic z-powers: Laurent series expansions, Complex Variables and Elliptic Equations, 2011.

S. Bock, K. Gürlebeck, R. Lavicka, V. Soucek, The Gelfand-Tsetlin bases for spherical monogenics in dimensionRevista Matematica Iberoamericana, 2011.
 
T. Fröbel, B. Firmenich, C. Koch, Quality assessment of coupled civil engineering applicationAdvanced Engineering Informatics, 25 (4): 625-639, 2011.
 
H. Keitel, G. Karaki, T. Lahmer, S. Nikulla, V. Zabel, Evaluation of coupled partial models in structural engineering using graph theory and sensitivity analysisEngineering Structures, 33 (12): 3726-3736, 2011.
 
T. Lahmer, Optimal experimental design for nonlinear ill-posed problems applied to gravity dams, Journal of Inverse Problems, 27 (12): 125005, doi:10.1088/0266-5611/27/12/125005, 2011.
 
T. Lahmer, Konzepte der optimalen Versuchsplanung für das Monitoring von BauwerkenAllgemeine Vermessungs-Nachrichten, 3, 2011.
 
T. Lahmer, C. Könke, V. Bettzieche, Optimale Positionierung von Messeinrichtungen an Staumauern zur BauwerksüberwachungWasserwirtschaft, 10, 2010.
 
T. Most, Assessment of structural simulation models by estimating uncertainties due to model selection and model simplificationComputers and Structures, 89 (17/18): 1664-1672, 2011.
 
T. Most, Efficient structural reliability methods considering incomplete knowledge of random variable distributionsProbabilistic Engineering Mechanics, 26 (2): 380-386, 2011.
 
N. Nguyen-Thanh, J. Kiendl, H. Nguyen-Xuan, R. Wüchner, K.U. Bletzinger, Y. Bazilevs, T. Rabczuk, Rotation free isogeometric thin shell analysis using PHT-splinesComputer Methods in applied Mechanics and Engineering, 200 (47): 3410-3424, 2011.
 
 
2010

M. Bauer, M. Reuter, Realität- Experiment- Simulation Untersuchungen am Beispiel eines Biegeträgers, 17. DASt- Kolloquium, Weimar, Germany, Oktober 2010.

M. Reuter, Modellbildung beim Entwurf stählener Rahmentrafwerke17. DASt- Kolloquium, Weimar, Germany, Oktober 2010.

J. Schwarz, S. Beinersdorf, T. Langhammer, M. Leipold, Ch. Kaufmann, Realistic vulnerability functions of masonry structures - lessons learned from damaging earthquakes in southern Germany8th International Masonry Conference, Dresden, Germany, July 2010.

P. Stein, NURBS solid modelling using an operator-based approachInternational Conference on Computing in Civil and Building Engineering ICCCBE, Nottingham, England, June - July 2010.

T. Fröbel, B. Firmenich, C. Koch, Formalisation and assessment of data structure based coupling in distributed civil engineering apllications, International Conference on Computing in Civil and Building Engineering ICCCBE, Nottingham, England, June - July 2010.

D. Adam , H.F. Schweiger , R. Markiewicz , T. Knabe, EURO 2008 stadium Klagenfurt - prediction, monitoring and back calculation of settlement behaviourInt. Conf. from Research to Design in European Practice, Bratislava, Slovak Republic, June 2010.

T. Lahmer, C. Könke, V. Bettzieche, Optimale Positionierung von Messeinrichtungen an Staumauern zur Bauwerksüberwachung,  VII. Mittweidaer Talsperrentag -Messtechnische Überwachung von Stauanlagen, Mittweida, Germany, May 2010.

T. Most, Identification of the parameters of complex constitutive models: Least squares minimization vs. Bayesian updatingIFIP WG 7.5 Working Conference on Reliability and Optimization of Structural Systems, Munich, Germany, April 2010.

H. Keitel, A.Dimmig-Osburg, Uncertainty and sensitivity analysis of creep prediction models in concrete structures, 8th fib international PhD Symposium in Civil Engineering, Kgs. Lyngby, Denmark, 2010.

H. Keitel, A. Dimmig-Osburg, Prediction of creep deformation of PCC using models of standard concreteICPIC 2010 - 13th International Congress on Polymers in Concrete, Madeira, Portugal, February 2010.

J. Schwarz, S. Beinersdorf, T. Langhammer, M. Leipold, Ch. Kaufmann, Vulnerability functions for masonry structures derived from recent earthquakes in Germany14th International Masonry Conference, Ohrid, Macedonia, 2010.

H. Keitel, A.Dimmig-Osburg, Uncertainty and sensitivity analysis of creep models for uncorrelated and correlated input parameters, Engineering Structures, 32 (11): 3758-3767, 2010. 

T. Lahmer, Crack identification in hydro-mechanical systems with applications to gravity water dams, Inverse Problems in Science & Engineering, 18 (8): 1083-1101, 2010.
 
T. Most, T. Knabe, Reliability analysis of the bearing failure problem considering uncertain stochastic parametersComputers and Geotechnics, 37 (3): 299-310, 2010.
 
J. Schwarz, S. Beinersdorf, T. Langhammer, M. Leipold, Verhalten von Mauerwerksbauten unter Erdbebeneinwirkung: Auswertung der Schäden des Albstadt-Erdbebens vom 3. September 1978Mauerwerk, 14 (3): 126-135, 2010.

 

2009

E. Bombasaro, Influence of the model creation methodology on the failure probability of gust exposed structures7th International Probabilistic Workshop, Delft, Netherlands, November 2009.

T. Most, Modeling of imprecise distribution functions by uncertain stochastic moments within the maximum entropy formulation7th International Probabilistic Workshop, Delft, Netherlands, November 2009.

M. Nasser, M. Schwedler, F. Wuttke, C. Könke, T. Schanz, Dynamic soil-structure interaction models: Theory and applicationInternational Conference UACEG2009: Science & Practice, Sofia, Bulgaria, October 2009.

J. Schwarz, M. Leipold, Ch. Kaufmann, B. Tulaganov, Zur Wirklichkeitsnähe analytischer Schadensprognosen: Auswertung der Schäden des Albstadt-Erdbebens vom 3. September 1978, D-A-CH Tagung 2009: Erdbeben und Mauerwerk, Zurich, Switzerland, September 2009.

M. Hofmann, T. Most, G. Hofstetter, Parameter identification for partially saturated soil models, EURO:TUN 2009, 2nd Int. Conf. on Computational Methods in Tunnelling, Ruhr University Bochum, Germany, September 2009.

E. Bombasaro, Investigation of parameter influences in wind induced structural reaction analysis due to structural model dimensions changesEuropean Safety and Reliability Conference ESREL 2009, Prague, Czech Republic, September 2009.

T. Most, Estimating uncertainties in maximum entropy distribution parameters from small-sample observationsEuropean Safety and Reliability Conference ESREL 2009, Prague, Czech Republic, September 2009.

T. Knabe, M. Zimmerer, T. Most, T. Schanz, Identification of constitutive parameters for geomaterials modeling using an optimization strategy, EURO:TUN 2009, 2nd Int. Conf. on Computational Methods in Tunnelling, Ruhr University Bochum, Germany, September 2009.

T. Lahmer, Coupled HM-field system identification - application to water reservoirs EURO:TUN 2009,2nd Int. Conf. on Computational Methods in Tunnelling, Ruhr University Bochum, Germany, September 2009.

P. Stein, NURBS-basierte Finite Elemente als Basis für die Integration von Ingenieuranwendungen,Forum Bauinformatik 2009, Karlsruhe, Germany, September 2009.

P. Stein, NURBS-based elements as a basis for integrating engineering applications18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

T. Most, Estimating uncertainties from inaccurate measurement data using maximum entropy distributions18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

T. Knabe, Identification of constitutive parameters for geomaterials modeling using optimization strategies18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

I. Wudtke, Modelling of material phenomena of steel in constitutive relations in context of welding18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

G. Karaki, Models for coupling bridge subsystems18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

H. Keitel, A. Dimmig-Osburg, V. Zabel, Characterization of time-dependent deformations of polymer modified cement concrete (PCC) , 18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

E. Bombasaro, C. Bucher, Investigation of modeling errors of different random field based wind load formulation18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

T. Fröbel, Coupling patterns in engineering applications18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

M. Leipold, Modelling techniques for RC-frame systems with infills18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

M. Reuter, Evaluation of analysis methods for the design of frame structures18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

M. Nasser, Seismic response of R/C frames considering dynamic soil-structure interaction18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

T. Lahmer, Hydro-mechanical coupled field system identification - application to water reservoirs18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

S. Nikulla, Influence of the abstraction level in kinematical models of finite element formulations18th Int. Conf. on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, Germany, July 2009.

T. Lahmer, C. Könke, T. Schanz, Coupled HM-field system identification - application to water reservoirsInt. Conf. on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2009, CIMNE, Barcelona, Spain, June 2009.

J. Schwarz, L. Abrahamczyk, T. Langhammer, M. Leipold, M. C. Genes, M. Bikçe, S. Kaçin, Building typology for risk assessment: case study Antakya (Hatay) - WCCE-ECCE-TCCE Joint Conference Earthquake and Tsunami, Istanbul, Turkey, June 2009.

T. Knabe, W. Schädler, A. Corsini, V. Mair, T. Schanz, Hangbewegung Corvara (Dolomiten, Italien) - Effizienz möglicher Sanierungsmaßnahmen24. Christian Veder Kolloquim, Graz, Austria, April 2009.

 

2008

T. Most, An adaptive response surface approach for reliability analyses of discontinuous limit state functions6th International Probabilistic Workshop, Darmstadt, Germany, November 2008.