• © Bauhaus-Universität Weimar, Foto: Barbara Proschak

Coursework

In the winter semester 2023/2024, all courses of the Chair of Steel and Hybrid Structures will start as presence courses in the corresponding lecture halls. We will inform you about the further implementation during the semester in the individual modules and the corresponding Moodle rooms. Please check back regularly for updates.

Under the following links you will find the listing of the offered courses as well as possible topics for student research projects and master theses.


Below you will find an overview of the courses offered as well as links to further information. For examination dates and rooms, please refer to the examination schedules of the faculty or the notices at the Chair.

B.Sc. Civil Engineering (in German)

Grundlagen des Konstruktiven Ingenieurbaus
3. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner, Assistenten


Einführung in die Bauweisen des Konstruktiven Ingenieurbaus - Stahlbau
4. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Einführung in die Bauweisen des Konstruktiven Ingenieurbaus - Holz- und Mauerwerksbau
4. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. M. Kästner


Bauweisen des Konstruktiven Ingenieurbaus I - Stahl- und Verbundbau I
5. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Bauweisen des Konstruktiven Ingenieurbaus I - Konstruktionen des Holz- und Mauerwerksbaus
5. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. M. Kästner

Projekt Konstruktiver Ingenieurbau
5. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten


Bauweisen des Konstruktiven Ingenieurbaus II - Stahl- und Verbundbau II
6. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

M.Sc. Civil Engineering - Structural Engineering (in German)

Vertiefung der Bauweisen des Konstruktiven Ingenieurbaus - Stahlbau
1. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Vertiefung der Bauweisen des Konstruktiven Ingenieurbaus - Ingenieurholzbau
1. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. M. Kästner


Stahl-, Verbund- und Holzbrücken - Stahl- und Verbundbrücken
2. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Stahl-, Verbund- und Holzbrücken - Holzbrücken
2. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. A. Simon, Dr.-Ing. M. Kästner

Stahl- und Verbundbrücken/Stahl- und Hybridbau - Stabilität plattenartiger Bauteile
2. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Hoch- und Industriebau - Stahl- und Hybridbau - Tragwerksberechnung und Bauteilbemessung im Stahlbau
2. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Hoch- und Industriebau - Stahl- und Hybridbau - Ingenieurholzkonstruktionen
2. Semester (SoSe)
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. M. Kästner


Ausgewählte Kapitel des Brückenbaus - Brückennachrechnung
3. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Ausgewählte Kapitel des Hoch- und Industriebaus - Stahl- und Verbundkonstruktionen
3. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten


Wahlpflicht- und Wahlmodule:

Computerorientierte Berechnungsverfahren im Stahlbau
WiSe, Link BISON
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Aluminiumbau
WiSe, Link BISON
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. J. Hildebrand

Glasbau
SoSe, Link BISON
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. C. Sirtl

Vertiefung der Schweißtechnik
SoSe, Link BISON
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. J. Hildebrand

M.Sc. Natural Hazards and Risks in Structural Engineering

Structural Engineering - Steel Structures

Natural Hazards and Risks in Structural Engineering (NHRE), 2. Semester (SoSe)
Lecturers of the Chair of Steel and Hybrid Structures: Prof. Dr.-Ing. M. Kraus, Assistants


Elective Compulsary and Elective Moduls:

Design and Interpretation of Experiments - Experiments in Structural Engineering


Natural Hazards and Risks in Structural Engineering (NHRE) and Digital Engineering, WiSe
Lecturers of the Chair of Steel and Hybrid Structures: Prof. Dr.-Ing. M. Kraus, Assistants

Modelling of Steel Structures and Numerical Simulation

Natural Hazards and Risks in Structural Engineering (NHRE) and Digital Engineering, SoSe
Lecturers of the Chair of Steel and Hybrid Structures: Prof. Dr.-Ing. M. Kraus, Assistants

B.Sc. Management/Environmental Engineering (in German)

Einführung in die Bauweisen - Stahlbau
Management und Umweltingenieurwissenschaften, 3. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Prof. Dr.-Ing. M. Kraus, Assistenten

Einführung in die Bauweisen - Holz- und Mauerwerksbau
Management und Umweltingenieurwissenschaften, 3. Semester (WiSe)
Lehrende der Professur Stahl- und Hybridbau: Dr.-Ing. M. Kästner

The Chair of Steel and Hybrid Structures is currently supervising student projects (Master's, Bachelor's and student research projects) focusing on the following topics. 

Have we caught your attention? Please feel free to contact us!

Additive Fertigung im Stahlbau

Künftig werden Bauteile aus dem 3D-Drucker auch im Bauwesen Einzug halten. Über das Stabilitätsverhalten solcher additiv gefertigter Komponenten ist jedoch noch nicht viel bekannt. Die Arbeiten auf diesem Themengebiet beschäftigen sich mit z. B. den Materialeigenschaften, Auswirkungen von Imperfektionen auf das Stabilitätsverhalten; Ermittlung thermischer Eigenspannung, strukturmechanischer Simulationen sowie weitere Untersuchungen verschiedener Aspekte additiv gefertigter Bauteile.

Ansprechpartner:
Caridad Moscoso (caridad.moscoso[at]uni-weimar.de)

Fassadensysteme und deren Verbindungstechniken

Innerhalb von Forschungsprojekten zum Themenkomplex des Fassadenbaus ist zu den Schwerpunkten Konstruktiver Glasbau und Verbindungstechniken die Ausarbeitung von Aufgabenstellungen für Studienarbeiten/Abschlussarbeiten gegeben. Möglichkeiten des experimentellen Arbeitens, Durchführen von Literaturrecherchen sowie Numerischen Untersuchungen (Strömungssimulationen) sind gegeben. Konkrete Themen werden nach Anfrage ausgearbeitet.

Ansprechpartnerin:
Christin Sirtl (christin.sirtl[at]uni-weimar.de)

Hybride Holzbrücken mit Klebverbund

Ziel eines aktuellen Forschungsschwerpunktes ist es, die Holz-Beton-Verbundbauweise (HBV-Bauweise) mit Klebverbund für den Brückenbau zu etablieren. Im Fokus stehen u. a. die Erforschung des Verbundtragverhaltens unter Langzeitbeanspruchung infolge mechanischer und wechselnder thermischer Beanspruchung sowie die Entwicklung des optimalen Klebfugendesigns und einer robusten Herstellungstechnologie. Basierend auf experimentellen Untersuchungen mit integrierter Sensorik werden numerische Simulationsmethoden und Ingenieurmodelle kalibriert und weiterentwickelt, um Prognosen zum Langzeittragverhalten des Verbundes sowie Parameterstudien zum Gesamttragverhalten durchzuführen. Konkrete Themen mit inhaltlichem Bezug zum Forschungsvorhaben werden nach Anfrage ausgearbeitet.

Ansprechpartner:
Martin Kästner (martin.kaestner[at]uni-weimar.de)

Holzbau / Bambus-Bau / Nachhaltige Bauweisen

Der Einsatz von Holz und anderen nachwachsenden Rohstoffen als Baumaterialien nimmt aufgrund umweltpolitischer und baurechtlicher Veränderungen, bautechnischer Entwicklungen sowie sich wandelnder Nutzerinteressen stetig zu. Fehlende wissenschaftliche Untersuchungen und normative Regelungen schränken in dieser dynamischen Entwicklung oft die Anwendungsmöglichkeiten im Bauwesen ein. Nachfolgend sind einige Themenbereiche genannt, zu denen konkrete Aufgabenstellungen nach Anfrage ausgearbeitet werden können:

  • Vergleich von bestehenden und neuen Konzepten/normativen Regelungen für ausgewählte Tragfähigkeits- und Gebrauchstauglichkeitsnachweise des Holzbaus
  • Ermüdungsnachweise im Holzbau
  • Kriech-/Relaxationsverhalten von Holz bei Schubbeanspruchung
  • Untersuchungen zur Bewertung der Tragfähigkeit und der Klebfugenfestigkeit von historischem Brettschichtholz
  • Bambus-Bau (z.B. Literaturrecherchen, Stabilitätsuntersuchungen (FE-Analysen, experimentelle Untersuchungen), Modellierung von Imperfektionen, 3D-Scans der Bambusgeometrie, Untersuchungen zu Verbindungstechniken, Design und Konzeption von Bambushäusern und -brücken)

Ansprechpartner:
Martin Kästner (martin.kaestner[at]uni-weimar.de)
Henrieke Fritz (henrieke.fritz[at]uni-weimar.de)

Probabilistische Tragwerksanalysen unter Berücksichtigung von Instationaritäten

Im Rahmen probabilistischer Tragwerksanalysen sollen speziell unter Berücksichtigung zeitabhängiger Lasten bzw. Widerstände Zuverlässigkeits-, Sensitivitäts- und Variationsanalysen durchgeführt werden. In diesem Zusammenhang besteht weiterhin der Bedarf an neuen und effizienten Methoden, die insbesondere Instationaritäten in Datenreihen abbilden und bewerten lassen. (Studienarbeit/Masterarbeit)

Ansprechpartner: 
Robert Arnold (robert.arnold[at]uni-weimar.de )

Programmentwicklung für den Stahl-, Verbund- und Hybridbau

Programmentwicklung für verschiedene Problemstellungen unter der Prämisse der einfachen Bereitstellung durch tabellenkalkulationsbasierende VBA-Programmierungen.

Ansprechpartner:
Robert Arnold (robert.arnold[at]uni-weimar.de )

Program development in the area of steel and hybrid structures, finite elements, and structural design

Development of software for solving diverse problems of finite elements and structural design in the steel field. The programming languages are C#, Matlab, and Ansys APDL commands.

Contact:
Stalin Ibáñez (stalin.patricio.ibanez.sanchez[at]uni-weimar.de)

Stabilitätsanalysen im Stahlbau

Untersuchungen zu den Stabilitätsfällen Biegeknicken, Biegedrillknicken und Plattenbeulen von Stahlbauteilen und Stahltragwerken (geometrische Nichtlinearität bzw. Theorie II. Ordnung sowie physikalische Nichtlinearität). Aufgabenstellungen können nach Anfrage u.a. zu folgenden Themen ausgearbeitet werden:

  • Einfluss von tatsächlich gemessenen geometrischen und materiellen Imperfektionen auf das Stabilitätsverhalten von Stahlträgern und plattenartigen Stahlbauteilen 
  • Geometrieaufnahme von Stahlträgern: Auswertung der Qualität von photogrammetrischen Aufnahmemethoden mit verschiedenen Kameraaufbauten und –parametern
  • Parameterstudien auf Grundlage von geometrisch und materiell nichtlinearen Analysen unter Berücksichtigung von Imperfektionen (GMNIA) für die Bewertung unterschiedlicher Ansätze zur Modellierung geometrischer und materieller Imperfektionen

Ansprechpartnerin:
Caridad Moscoso (caridad.moscoso[at]uni-weimar.de )
Plattenbeulen: Robert Arnold (robert.arnold[at]uni-weimar.de)

Structural life cycle assessment

Structural life cycle assessment of new and existing structures is the dominant research field that requires efficient numerical modelling, structural health monitoring, and data analysis. Within this scope, the following fields are primarily suggested, but not limited to:

  • Fatigue analysis of metal structures (stress-based method, strain-based method, damage tolerant method, with national standards)
  • Life cycle assessment with the aid of structural health monitoring - SHM (data analysis with frequentist and Bayesian approach)
  • Program development to aid fatigue analysis and SHM
  • Finite element modelling of structural details (Ansys mechanical APDL)

Contact: 
Sharmista Chowdhury (sharmistha.chowdhury[at]uni-weimar.de)

Uncertainty evaluation of structural modelling

Evaluation of uncertainties in finite element modelling considering different element types and modelling theories.

Contact:
Stalin Ibáñez (stalin.patricio.ibanez.sanchez[at]uni-weimar.de)

Do you have a topic proposal?

We are also happy to supervise your own suitable topic proposals by arrangement. Please use our template for your submission:

Topic suggestions form (Word-file)

Master theses

Ganugapati, Venkata Raghavendra Kumar (2024)
Numerical modeling of experimental data to characterize the aging behavior of silicones
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Silva Llerena, Carlos Eduardo (2024)
Determination of fiber volume fractions of bamboo using digital image analysis
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Mendoza, Julio Cesar (2023)
Operational Stress Estimation from Output-Only Vibration Measurements
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Hernandez Salcedo, Luisa Fernanda (2023)
Transfer of photogrammetric data of a historically cast-iron column
into a numerical model
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Sharma, Sushil (2023)
Damage assessment of a mediumsized wind turbine blade (WTB) due to high-cycle fatigue
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Giri, Divya (2023)                                                                                                                      Numerical investigations on the influence of cracks on the axial compression and flexural buckling behavior of bamboo culms                                                                                        Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Patil, Rishabh (2023)
Static investigations of a steel fabricated 325 m guy mast tower
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Sheir, Bahaeddin (2023)
Untersuchungen zum Einfluss von Imperfektionen auf die Tragfähigkeit längsversteifter Beulfelder
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Moscoso

Satrasala, Sagar Gupta (2023)
Numerical investigations on the stability behavior of European bamboo culms considering geometric and material imperfections
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Hamal, Kamal Raj (2023)
Comparison of detail modelling using shell and beam elements for the design of steel structures
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Ibanez

Yigezu, Mikiyas Belayneh (2022)
Fatigue analysis of an orthotropic steel deck (OSD) bridge
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Mehta, Zenith Piyushkumar (2022)
Numerical simulation of compression tests on segments of wire-arc additive manufactured members with a circular hollow cross section
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Paetow, Henri (2022)
Strömungssimulation und Parameterstudien mit FE-Modellen eines Doppelglasfassadensystems - Validierung, Sensitivität und Robustheit
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Paulmann, Alexander (2022)
Experimentelle Untersuchung des Alterungsverhaltens von Klebstoffen am Beispiel von Silikonen und Mischpolymer
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Hassanian, Yasmine Mohamed Abdelfatah (2022)
Numerical evaluation and structural rehabilitation of an existing steel bridge for different loading scenarios
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Ibanez, Dipl.-Ing. M. Münch

Amiri, Abdullah Jan (2022)
Numerical analysis on joint classifications according to the Eurocode 3
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Ibanez

Gifta, Simon (2022)
On the Influence of Geometric and Material Imperfections in stability analyses  of I-sections
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Moscoso

Kolla, Aswani Chandh (2022)
Investigation of the Load-Bearing Behaviour of Shear Panels in Welded Beam-to-Column Joints
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Baby, Ashly (2022)
Deflection estimation of beam-like structures from monitoring strain response
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Osindeinde, Lekan Olawale (2022)
Parametric stress analysis of longitudinally stiffened orthotropic steel deck (OSD)
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. S. Chowdhury

Cheikhmous, Radwan (2022)
Validation of numerical software based on beam elements considering warping
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Büttner, Alexander (2021)
Numerische Untersuchungen und Weiterentwicklung der Tragmodelle von in Beton eingespannten Stahlstützen unter Biegung und Torsion
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. C. Moscoso, M. Sc. C. Sirtl

Fritz, Henrieke (2021)
Entwicklung einer additiv gefertigten Sensor-Layer zur Erfassung von Einwirkungen adaptiver Tragwerke
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. R. Arnold

Alsheikh Khaled, Ghiath (2021)
Connection Behavior in Structural Beam Analysis Software considering pre-tensioned bolts
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Bonilla Sanchez, David Jahel (2021)
Comparison of geometrical nonlinear analysis and second order theory for steel members in torsion
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Kallukutiginahal, Shankar (2021)
Optimization of prefabricated Timber-Concrete Hybrid Element Connections as a part of Horizontal Bracing Systems
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner

Hoang, Trung Hieu (2021)
Untersuchungen zum Eigenspannungsansatz für numerische Simulationen von längsversteiften Platten
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Gebreyesus, Filmon Yemane (2021)
Evaluation of the Stability Behaviour of Cold Formed ∑-Purlins using Higher and High Strength Steel
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Mämpel

Bekbuzarov, Adam (2021)
Stabilitätsverhalten von Anschlüssen mit Knotenblechen in Fachwerkkonstruktionen
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Mämpel

Ismael Elsayed Ali, Ahmed Adel (2021)
Analysis of warping transmission between finite Elements and the influence of structural detailing
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Manu (2021)
Imperfections for the verification of stiffened buckling panels in pure bending
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Mämpel

Jentzsch, Melanie (2020)
Die Holz-Beton-Verbundbauweise im Straßenbrückenbau - Parameteruntersuchungen zur Einschätzung der Leistungsfähigkeit unterschiedlicher Verbundfugenkonfigurationen
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner, M. Sc. S. Rau

Elbehairy, Ahmed Hesham Abdeldaym Mohamed (2020)
Computational investigations on the influence of rails on the stability and fatigue behaviour of multispan crane runway girders
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Mämpel

Alkhalaf, Mohamad Nour (2020)
Influence of support conditions on buckling curves and the capacity of buckling panels
Betreuer: Prof. Dr.-ing. M. Kraus, M. Sc. S. Mämpel

Gad, Mostafa Ahmed Abdellatif (2020)
Buckling stability analysis of web panels considering various boundary conditions
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Chayeb, Guy (2020)
Plastic cross-section analysis considering shear stresses due to shear forces
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Ibanez

Klaus, Martin (2019)
Beurteilung der Tragfähigkeit von Schraubenverbindungen mit Gewindebohrungen
Betreuer: Prof. Dr.-ing. M. Kraus, Dipl.-Ing. B. Wittor, Dipl.-Ing. Friedrich (Rudolstädter Systembau)

Alsamman, MHD Waseem (2019)
Einfluss der Torsionssteifigkeit geschlossener Längssteifen auf den Plattenbeulnachweis nach Eurocode 3, Teil 1-5
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. S. Mämpel

Arnold, Robert (2019)
Untersuchungen von Sensorsystemen zur Erfassung unterschiedlicher Belastungssituationen auf Brückentragwerken
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Gebreyohannes, Winta Tariku (2019)
Modelling of semi-rigid connections for applications in structural analyses
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Ibanez

Aljomaa, Mohammad (2019)
Ingenieurmodelle für Queraussteifungen im Verbundbrückenbau 
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. G. Setzpfandt, M.Sc. S. Mämpel

König, Richard (2019)
Untersuchungen zu Schubverformungen und Normalspannungsverteilungen bei Trägern mit breiten Flanschen 
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Le, Huy Tam (2018)
Untersuchungen zum Einfluss der Probengeometrie auf Spannungs-Dehnungsbeziehungen von Stahlwerkstoffen
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. I. Wudtke

Olivares, Rodrigo (2018)
Numerical study of the load bearing behavior of welded connections with high-strength fine-grained steels - Simulation of tensile tests
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. I. Wudtke

Choi, Kyu Won (2018)
Konstruktion und Bemessung weitgespannter Dächer mit Raumtragwerken
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Kanchi, Praneeth Chandra (2018)
On the stability behaviour of truss girders influenced by stiffening systems and construction detailing
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Engelmann, Markus (2018)
Stabilitätsverhalten dünnwandiger Bleche mit Ausnehmungen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Vignan, Poduri Venkata Surya (2018)
On the stability behaviour of two-hinged frame girders influenced by stiffening systems
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Gehring, Lukas (2017)
Untersuchungen zum Tragverhalten und zur Bemessung von Brettsperrholzelementen unter Plattenbeanspruchung
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. M. Kästner

Franz, Susann (2017)
Zur Bewertung klimatisch beanspruchter geklebter Stahl-Glas-Verbindungen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Jayachandran, Vaishnav (2017)
Influence of hollow cross section parts on the lateral torsional buckling of steel beams
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Prajapati, Shubham (2017)
Investigations on composite dowels as shear connectors of steel-concrete composite girders
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Mengistu, Addisu Shewarega (2017)
Elastic critical moments for lateral torsional buckling of steel beams
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Karlstetter, Matthias (2017)
Numerische Untersuchung geschweißter Kreuzstöße aus höherfesten Feinkornbaustählen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Graul, Axel (2017)
Numerische Untersuchungen zum Stabilitätsverhalten von Verbundträgern bei negativer Momentenbeanspruchung
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Hagos, Simon Kahsay (2016)
Realistic prediction of composite beam deformations
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Ramamurthy, Vinod Kumar (2016)
Stability behaviour of steel constructions in buildings
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Aowal, Raheef (2015)
Plate-Buckling verifications in steel bridge construction
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Faltenbacher, Anja (2015)
Untersuchungen zum Tragverhalten und zur Monitoring-basierten Bemessung von Stahl-und Verbundbrücken
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Bachelor theses

Senge, Lara (2024)
Bambus als alternatives Baumaterial im Hochbau: Eine Analyse von bestehenden Konstruktions- und Bemessungsrichtlinien
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Rosin, Anna-Lena (2024)
Zur Tragfähigkeit von Trägern mit U-förmigem Querschnitt unter Biegung und Torsion
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Moscoso

Neu, Justus (2023)
Untersuchung von Dauerhaftigkeitsaspekten der Bambusbauweise
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Koch, Lea (2023)
Hybride Holzbrücken mit Klebverbund-Untersuchungen zur Charakterisierung von Polymermörteln für die baupraktische Anwendung
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner

Kelwing, Sarah Rebecca (2023)
Potenziale und Funktionsweisen der programmierbaren Schnittstellen für RFEM
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Lenk, Nicolas (2023)
Variantenstudie zu Konstruktionen von Bahnsteigdächern in Holzbauweise
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner

Schumann, Lara (2023)
Untersuchung von Nachhaltigkeitsaspekten der Bambusbauweise
im europäischen Kontext
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. H. Fritz

Chlum, Florian (2022)
Konzeption, Dokumentation und Auswertung von Zugversuchen an axialen Proben aus einem additiv gefertigten, kreisförmigen Hohlprofil
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. R. Arnold

Manko, Letitia (2022)
Untersuchungen zum Einfluss lokaler Querschnittsschwächungen auf das Stabilitätsverhalten von Stützen
Betreuer: Prof. Dr.-ing. M. Kraus, M.Sc. R. Arnold

Gramatte, Nicolas (2022)
Untersuchungen zur Instandsetzung des Torhauses der Burg Ranis - Schadensidentifikation und statisch-konstruktive Analyse der historischen Holzkonstruktionen
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner

Heinecke, Jannes (2022)
Historische Leimholzbinder in Hetzerbauweise - Baugeschichte und Materialqualität
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. T. Baron, Dr.-Ing. M. Kästner

Meinl, Nico Jürgen (2021)
Zum Einsatz von Hohlprofilen in ebenen Fachwerkträgern und programmtechnische Bemessungshilfen für Knotennachweise
Betreuer: Prof. Dr.-Ing. M. Kraus, M. Sc. R. Arnold

Götz, Johann (2021)
Vergleich und Bewertung von Konzepten für Schwingungsnachweise im Holzbau
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. M. Kästner

Naneh, Alameer Motaz (2021)
Erarbeitung und Anwendung einer Aufgabensammlung zur Validierung räumlicher Stabwerksprogramme für den Stahlbau
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Paulmann, Alexander (2020)
Struktureller Aufbau und Funktionsweise von Glasdoppelfassadensystemen - Zusammenstellung, Analyse und Bewertung
Betreuer: Prof. Dr.-ing. M. Kraus, M.Sc. C. Sirtl

Zhang, Ziyi (2020)
Untersuchungen zum Tragverhalten von Beulfeldern mit großen Ausnehmungen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Moscoso

Ni, Bijun (2020)
Zum Tragverhalten von Metallfassaden - Variantenuntersuchungen zur Ausführung einer Aluminium-Lamellenfassade
Betreuer: Prof. Dr.-ing. M. Kraus, M.Sc. C. Sirtl, M. Anderle (GIP Glazing)

Markner, Mark (2019)
Vergleichende Untersuchungen zur Ausführung von biegesteifen Anschlüssen als Laschen- und Stirnplattenstoß
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Shi, Yao (2019)
Untersuchungen zum Anschlussverhalten vorgespannter Stirnplattenverbindungen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Alheid, Johanna (2019)
Zur versuchsgestützten Bemessung von Ingenieurkonstruktionen im Grenzzustand der Tragfähigkeit
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. I. Wudtke

Alhenawi, Maisam (2019)
Untersuchungen zum Anschlussverhalten von Stirnplattenverbindungen mit dünnen Stirnplatten
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Könitzer, Elias (2018)
Experimentelle Untersuchungen zur Beurteilung der thermischen Behaglichkeit beim Einsatz neuartiger Glaselemente in Isolierverglasungen
Betreuer: Prof. Dr.-Ing. M. Kraus, Prof. Dr.-Ing. C. Völker, M.Sc. C. Sirtl

Vasileuski, Andrei (2018)
Literaturrecherche zu Materialmodellen für Klebstoffe für die numerische Simulation im Stahl- und Glasbau und deren Anwendung / On Material Models of Adhesives and their Application in Numerical Simulations of Steel and Glass Constructions
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl, Dr.-Ing. M. Ganß

Bekbuzarov, Adam (2017)
Flugzeughangars – Untersuchungen zu Tragwerkskonzepten und Konstruktionsvarianten
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor

Müller, Michael (2017)
Statische Analyse und konstruktive Detaildurchbildung eines mobilen Höhenweges
Betreuer: Prof. Dr.-Ing. M. Kraus, Prof. Dr.-Ing. Nentwig, Dr. Hunger

Mustafa Abou Taam (2017)
Experimentelle Studie zum Spannungs-Dehnungs-Verhalten einzelner Bereiche von Schweißverbindungen an höherfesten Feinkornbaustählen S460M und S690Q
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. I. Wudtke

Fachinger, Sven (2017)
Untersuchungen zu Stahl-Holz-Hybridbauweisen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Hofer, Johanna (2017)
Zum Einfluss der Anschlusssteifigkeit auf das Stabilitätsverhalten von Rahmenkonstruktionen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Flügge, Katrin (2017)
Zum Einfluss von wölbversteifenden Maßnahmen auf das Biegedrillknickverhalten von Stahlprofilen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Hansmeier, Robin (2017)
Computerorientierte Umsetzung der Komponentenmethode für die Bemessung von Verbindungen mit Stirnplatten
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Klaus, Martin (2017)
Programmtechnische Umsetzung von Bemessungshilfen für Verbundstützen mit zweiachsiger Biegung und Normalkraft
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Käpplinger, Justus (2017)
Programmtechnische Umsetzung des vereinfachten Stabilitätsnachweises biegebeanspruchter I-Träger mit Vouten
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Weitmann, Roman (2016)
Zum Einsatz chemisch vorgespannter Gläser im Konstruktiven Ingenieurbau
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. C. Sirtl

Weber, Emma Friederike (2016)
Konstruktion und Bemessung von Stahlhallen im internationalen Vergleich
Betreuer: Prof. Dr.-Ing. M. Kraus, Dipl.-Ing. B. Wittor, M.Sc. S. Mämpel

Moscoso Avila, Maria Caridad (2016)
Einfluss realer Tragwerkseigenschaften auf numerische Simulationsergebnisse: Fallstudie Oberleitungsmasten
Betreuer: Prof. Dr.-Ing. M. Kraus, Dr.-Ing. Abrahamczyk, M.Sc. L. Göbel

Lehmann, Nina (2016)
Berechnungsmodelle für 4-reihige Stirnplattenverbindungen
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel, Dipl.-Ing. B. Wittor

Pfeiffer, Jana (2016)
Untersuchungen zum Stabilitätsverhalten von Verbundträgern
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

Arnold, Robert (2015)
Bauteilnachweise zum Biegedrillknicken nach DIN EN 1993-1-1
Betreuer: Prof. Dr.-Ing. M. Kraus, M.Sc. S. Mämpel

We regularly conduct excursions on various topics relating to steel, steel composite, timber and hybrid construction as part of the Master's degree course. Below are some impressions of recent events.

Excursions in timber construction May/June 2023

During two one-day excursions on May 31 and June 2, 2023, the participating students gained interesting insights into the production processes of three wood-processing companies in Thuringia and Saxony-Anhalt. Another destination was the Jena-Holzland forestry office in Stadtroda. Some impressions of the excursions can be found below.

We would like to thank the companies and the forestry office for the practical insights and presentations!

  • Tour of the laminated veneer lumber plant: from the delivery of the tree trunks through to the processing of ready-to-install construction elements made from BauBuche (laminated veneer lumber made from beech wood)
  • Information on the properties and possible applications of hardwood and BauBuche
  • Information about the forestry office in Stadtroda
  • Tour of the building that won the German Timber Construction Award 2019 (main material: BauBuche)
  • Knowledge transfer on forestry/forestry topics and sustainable use of wood

Excursion steel construction May 2023

As part of the excursion week of the Faculty of Civil Engineering, the Chair of Steel and Hybrid Structures organized a day trip to Eastern Thuringia and Saxony on 30 May.

First on the agenda was a tour of the GOLDBECK GmbH factory in Treuen. The first part of the tour provided an insight into the company's planning and construction process with a focus on digital planning tools. Afterwards, the students were able to gain an exciting insight into steel and sheet metal production processes during a guided tour. Finally, lunch was served in the GOLDBECK canteen. 

This was followed by a visit to the Carl Alexander Bridge near Jena. The steel truss structure, which was nominated for the German Bridge Construction Prize 2023, was extensively renovated from 2018 to 2020 and refurbished in line with its listed status. On site, the students were given a guided tour by Dr. Setzpfandt (Setzpfandt engineering office) and the company FUCHS Bau GmbH with interesting information about the repair process and the special structural features of the bridge.

Finally, the program included a site visit to the Erlenhöfe residential construction project by GOLDBECK near Jena. There, the students were able to gain an insight into the construction project, the construction processes and the company's prefabricated construction method. 

We would like to thank those responsible at the companies once again and look forward to next year's excursion!

Werksbesichtigung Fa. GOLDBECK in Treuen

Besuch der Carl-Alexander-Brücke bei Jena

Baustellenbegehung des Wohnungsbauprojektes Erlenhöfe (Fa. GOLDBECK)

Excursion to major structural engineering projects in NRW 2022

As part of the excursion week at the Bauhaus-Universität Weimar, the Institute of Structural Engineering organized an excursion to major projects in North Rhine-Westphalia (NRW) from 8 - 10 June 2022.

The starting point for lecturers and students was the university, from where they headed purposefully towards Cologne to the Leverkusen Rhine Bridge, the first and only destination of day 1. The Leverkusen Rhine Bridge crosses the A1 and is the northernmost of Cologne's eight Rhine bridges. The tour consisted of an inspection of the new bridge and the existing structure. 

Day 2 began with an exciting presentation at BASt, which provided insights into the company. This was followed by a visit to the test track, which, in addition to BASt, also offers universities and manufacturers the opportunity to test new products and ideas for their practical suitability. Another item on the agenda for the afternoon was a visit to one of the most important current transport infrastructure projects in the state capital of Düsseldorf, the expansion of the light rail network. The new U81 line will connect Düsseldorf Airport to the existing rail network when the first construction phase is completed.

Day 3 began with a site visit to a five-storey office building in solid construction, where the walls were delivered to the site as prefabricated parts. The final destination was Signal Iduna Park. The tour led through the stadium and its areas, but also provided exciting insights into the construction and the striking yellow-colored, externally guided steel pylons, which were added during a renovation phase to close the previously open stadium corners.

 

 

Tag 1: Leverkusener Rheinbrücke

Tag 2: BASt & Linie U81 Düsseldorf

Tag 3: Bürogebäude in Massivbauweise & Signal Iduna Park

Excursion timber and masonry construction 2022

Four destinations in the Central/Eastern Thuringia region were visited as part of the one-day excursion to timber construction/masonry construction on June 7, 2022.

At Wienerberg GmbH in Eisenberg, the participants were given a comprehensive insight into the production processes of modern thermal insulation bricks - from the extraction and delivery of raw materials, raw material preparation, shaping in the brick strand and the firing process in the tunnel kiln to the thermal insulation perlite filling.

The production of laminated timber trusses could be followed and reconstructed at STRAB Ingenieurholzbau Hermsdorf GmbH. In the joinery hall, the students were also given an insight into unusual special processes in timber engineering, such as the production of GRP-reinforced column base coatings for clamping in concrete sleeve foundations, the formation of rigid frame corners using universal finger joints or the block gluing of BauBuche components to form high-load-bearing solid timber columns for hall construction.

A visit to the Dragon's Tail Bridge in Ronneburg was the third destination of the day's excursion. With a total length of approx. 225 m, the unique wooden span construction is one of the longest wooden bridges in Europe. The bridge is also a successful example of the consistent implementation of structural wood protection measures. Encouraged to sway slightly by the students, the "Adventure Bridge" of the 2007 Federal Horticultural Show still lived up to its nickname in 2022.

The visit to the Jena-Holzland forestry office in Stadtroda proved to be a successful conclusion. On the one hand, the students were able to view a state-of-the-art timber building that was awarded the German Timber Construction Prize in 2019, and received additional information on the special features of the building's construction and the main construction material used, BauBuche, during a presentation by Mr. Jan Hassan (Pollmeier Massivholz GmbH und Co. KG). The visit was rounded off by the great commitment of the forestry office staff. A presentation first provided information about the tasks of a forestry office. A walk in the nearby municipal forest gave the participants a direct insight into some current forestry issues and challenges in connection with climate change. Forestry office manager Bernhard Zeiss and district manager Philipp Vogel emphasized the importance of the forest on the one hand, but also the importance of the structural use of wood from sustainably managed forests for climate protection on the other.

Impressions of the excursion can be found below. We would like to thank the companies and the forestry office for the interesting practical insights and presentations!

Firma Wienerberg GmbH am Standort Eisenberg

Firma STRAB Ingenieurholzbau Hermsdorf GmbH

Drachenschwanzbrücke in Ronneburg

Forstamt Jena-Holzland in Stadtroda

Excursion STRAB & Rettenmeier January 2020

The course Advanced Construction Methods, Part Timber Engineering imparts in-depth knowledge of the load-bearing behavior, calculation and structural design of laminated timber engineering structures in the Master's degree course in Civil Engineering. During the excursion on 29.01.2020, the students gained additional insights into the production processes of two wood-processing companies.

All work steps in the production of laminated timber constructions, from the delivery of the board lamellas, finger-jointing and production of curved trusses in the press bed, to the production of transverse tensile reinforcements, could be directly understood at STRAB Ingenieurholzbau Hermsdorf GmbH.

At Rettenmeier GmbH in Hirschberg, the production of solid structural timber could also be followed in all work steps, from the delivery of the logs to the sawmill, sorting, drying, finger-jointing and gluing to laminated beam cross-sections.

The day's excursion was rounded off with visits to the shell of the two-court sports hall on Meyerstrasse in Weimar and the hall tower in Burgk.

Werksbesichtigung Fa. STRAB, Herstellung von Brettschichtholzbindern im Pressbett
Werksbesichtigung Fa. STRAB
Werksbesichtigung Fa. Rettenmeier, Holzlagerplatz
Werksbesichtigung Fa. Rettenmeier, Sägewerk
Werksbesichtigung Fa. Rettenmeier, Sortierung
Besichtigung Saaleturm Burgk
Besichtigung Saaleturm Burgk

Excursions in steel and timber construction June 2019

The two day excursions organized by the Chair of Steel and Hybrid Structures as part of this year's excursion week of the Faculty of Civil Engineering were primarily aimed at students on Bachelor's and Master's degree courses specializing in structural engineering.

With the factory tour of Pollmeier Massivholz GmbH & Co. KG in Creuzburg and the subsequent visits to the Erfurt Ice Sports Center and the "Jägerstieg" wooden arch bridge over the BAB 4 motorway, the excursion on June 12th was dedicated entirely to timber engineering.

On the following day, the focus was on steel and bridge construction. In the morning, the Plauen Stahl Technologie GmbH plant was visited. This was followed by a visit to the construction site of a cable-stayed bridge over the Mulde river near Schlunzig (Zwickau).

Excursion to timber engineering, 12.06.2019

In Creuzburg, the students were able to experience the entire production process of laminated veneer lumber at first hand, from the delivery of the logs to the joinery of ready-to-assemble construction elements made from BauBuche. In addition, they received a wealth of information about the properties, possible applications and application limits of this innovative wood-based material, which has been produced exclusively by Pollmeier at the Creuzburg site from local beech wood and marketed worldwide since its market launch in 2014. The tour of a production hall still under construction with trusses made of BauBuche gave an impression of the performance of the construction product. The invitation to lunch was gladly accepted.

The ice sports center in Erfurt impressed the budding civil engineers with the imposing hall structure of the Gunda Niemann-Stirnemann Hall, which spans a 90x190 m floor plan in an arch shape using glulam. The guided tour through the technical facilities of the building complex, consisting of the speed skating hall, ice hockey hall, functional and ice technology buildings, was also interesting.

The "Jägerstieg" foot and cycle path bridge at Forsthaus Willrode near Erfurt was inspected on the way back to Weimar. With a total length of 77.7 m, the engineering structure, built in 2003, spans the 6-lane A4 federal highway as a 3-hinged arch pair made of larch CLT with cantilever beams saddled on both sides and mastic asphalt surfacing. The Jägerstieg Bridge is currently the only wooden bridge in the federal highway network within the Free State of Thuringia.

Anlieferung Nasslager Fa. Pollmeier Massivholz GmbH & Co. KG
Nasslager und Halle mit Fachwerkbindern aus BauBuche
Fertig gelegte Furnierschichtholzplatte
Furnierschichtholzplatte in der Presse
Fachwerkbinder aus BauBuche
Gruppenbild mit Exkursionsteilnehmenden
Eisschnelllaufhalle „Gunda-Niemann-Stirnemann-Halle“ in Erfurt
Fußpunkt der 2-Gelenk-Bogenbinder aus Brettschichtholz
Stahlüberspannung der Hallenbinder
Knotenpunkt zum Anschluss der Giebelbinder
Untersicht der Jägerstiegbrücke
Jägerstiegbrücke ü. d. BAB 4 am Forsthaus Willrode bei Erfurt

Excursion steel and hybrid construction, 13.06.2019

The students were guided through the production halls at the Plauen Stahl Technologie GmbH plant. During this very interesting tour, it was possible to gain an insight into the production of large steel components and the associated challenges. Plauen Stahl Technologie GmbH, which operates internationally, focuses on plant construction, structural engineering, bridge construction and hydraulic steel construction, so that construction parts for lock gates, crane runway girders, bridge box girders and other types of custom-made products could be viewed up close. A presentation on the company structure and the presentation of some completed projects gave the students an insight into the organizational structure, areas of responsibility and project diversity of engineers working in practice. This was reinforced by an invitation to lunch with employees of Plauen Stahlbau Technologie GmbH.

A new replacement bridge is being built over the Zwickauer Mulde near the village of Schlunzig near Zwickau. The two-span structure is being built as a cable-stayed bridge with a loosely reinforced in-situ concrete slab and fully locked bridge cables with innovative and novel corrosion protection.  The extruded corrosion protection layer is being used for the first time in Germany with this construction project. Employees of the engineering firm schulze+rank Ingenieurgesellschaft, the construction company Arlt Bauunternehmen GmbH and the Zwickau district road construction department provided the students with information on the environmental boundary conditions of the structure, special structural features during planning, logistical challenges during construction and numerous interesting details.

Kranbahnträger in Bearbeitung bei Plauen Stahl Technologie GmbH
Transport von Einzelteilen in der Fertigungshalle
Einzelbauteile eines Brückenhohlkastens
Außenlager der transportfertigen Bauteile
K 9316 Ersatzneubau Muldenbrücke in Schlunzig als Schrägseilbrücke - Fertiger A-Pylon mit Ortbetonplatte und Anschlusspunkten für die Seile
Erläuterungen zum Bauwerk durch das Ingenieurbüro schulze+rank
Erläuterungen zum Bauwerk durch das Bauunternehmen Arlt Bauunternehmen GmbH sowei den Landkreis Zwickau
Eingeschalte Ortbetonplatte mit A-Pylon
Gruppenfoto der Exkursionteilnehmenden

The staff of the Chair of Steel and Hybrid Structures would like to thank the participating companies and engineering offices for making these interesting excursion days possible for the students.

Excursion Goldbeck & buildings of the KIB May 2018

As part of the Faculty of Civil Engineering's excursion week, the Chair of Steel and Hybrid Construction took students from the Bachelor's and Master's degree courses in Civil Engineering and Natural Hazards and Risks in Engineering (NHRE) on a day trip on 23.05.2018. In the morning, we visited the construction site of a steel pedestrian bridge over the A4 near Stadtroda. We were given a detailed tour by the planning engineering firm DÄHN - Ingenieure and the client's representative from the Thuringian State Office for Construction and Transport. The production of steel building structures and metal construction was then on the agenda during the guided tour of the production halls at the Treuen site of Goldbeck GmbH. On the return journey from Treuen, the Glötzschtal Bridge was the first stop on the way. This is still the world's largest brick bridge and, as a technical monument, an impressive structure of early engineering achievements. The day ended with a visit to the Dragon's Tail Bridge near Ronneburg. The longest wooden bridge in Europe offers interesting insights into the structural design of a wooden span construction and structural wood protection.

Construction site tour, pedestrian bridge over the A4
Dipl.-Ing. T. Dähn explains the building

Factory tour of Goldbeck, production hall for steel components
Factory tour of Goldbeck, guided tour of the production hall for steel components
View of the intermediate station Göltzschtalbrücke
Perspective view of the Dragon's Tail Bridge near Ronneburg
Group photo of the excursion participants
View of the dragon's tail bridge near Ronneburg that was visited

Excursion STRAB & Rettenmeier November 2017

On 22.11.2017, we conducted a day excursion with students on the Master's degree course in Civil Engineering as part of the courses in timber construction that have been taken over by the Chair of Steel and Hybrid Structures since the summer semester of 2017. The production of engineering timber structures made of glulam was on the agenda during the guided tour of the production halls of STRAB Ingenieurholzbau Hermsdorf GmbH. The 43-metre-high Saale Tower in Burgk, which was built with the participation of STRAB and is indeed a "pioneering" timber engineering structure, was climbed on the way south and examined in particular with regard to the implementation of the requirements of structural timber protection. At the Rettenmeier company in Hirschberg, the production of solid structural timber could be followed through all stages of the process, from the delivery of the logs to the sawmill, sorting, drying, finger-jointing and gluing into laminated beam cross-sections.

Factory tour STRAB, joinery hall
Factory tour of STRAB, production of a curved glulam binder in a press bed
Factory tour of STRAB, production of glued composite components from several glulam cross-sections by "block gluing"
Factory tour Rettenmeier, wood storage yard
Factory tour Rettenmeier
Bending test of a finger joint
Tour of the Saaleturm Burgk
Tour of the Saaleturm Burgk
Tour of the Saaleturm Burgk

Excursion RSB & Saalburg May 2017

On 23.05.2017, we went on a day trip to the Rudolstädter Systembau GmbH (RSB) plant. After a detailed tour of the plant, the afternoon included a site visit to a bridge renovation by Schachtbau Nordhausen Bau GmbH. The listed bridge over the Bleiloch dam near Saalburg was viewed in detail.

Factory tour at RSB: excited observation of the welding robot
Factory tour at RSB: welding robots at work
Factory tour at RSB: welding robots at work
Construction site visit: Renovation of the bridge over the Bleiloch dam near Saalburg
Construction site visit: Renovation of the bridge over the Bleiloch dam near Saalburg
Construction site visit: Renovation of the bridge over the Bleiloch dam near Saalburg

Excursion Goldbeck May 2016

On 17.05.2016, we went on a day trip to the Goldbeck east plant in Treuen. After a detailed tour of the plant, the agenda included site visits to several industrial halls in the Erfurter Kreuz industrial estate.

Construction site tour of a future logistics hall
Guided tour of the Goldbeck plant at the Treuen production site

The Chair of Steel and Hybrid Construction participates annually in the Bauhaus Summer School with a project in the Forecast Engineering - From Past Design to Future Decision course. Information on the Summer School and the courses can be found on the Bauhaus Summer School website.

This year's project "Numerical Analyses on the Stability of Beam-Columns" focused on the stability of steel structures. In addition to numerical analyses, experiments were also carried out in the experimental facility - VTE. Below are some impressions of the experiments carried out by the Chair of Steel and Hybrid Construction.

© Bauhaus-Universität Weimar, Foto: Professur Stahl- und Hybridbau
© Bauhaus-Universität Weimar, Foto: Professur Stahl- und Hybridbau
© Bauhaus-Universität Weimar, Foto: Barbara Proschak
© Bauhaus-Universität Weimar, Foto: Barbara Proschak
© Bauhaus-Universität Weimar, Foto: Barbara Proschak
© Bauhaus-Universität Weimar, Foto: Barbara Proschak
© Bauhaus-Universität Weimar, Foto: Barbara Proschak
© Bauhaus-Universität Weimar, Foto: Barbara Proschak

Vertiefung der Schweißtechnik

Die Lehrveranstaltung "Vertiefung der Schweißtechnik" ist ein Bestandteil der Weiterbildung zum "Internationaler Schweißfachingenieur SFI/IWE". Die Inhalte entsprechen dem Teil 1 des SFI-Lehrgangs (s. unten). 

Aufgaben und Tätigkeiten als Schweißfachingenieur (SFI):

  • Planung und Überwachung von Schweißarbeiten im Metallbau sowie bei der Herstellung von Maschinen, Fahrzeugen und Anlagen
  • Auswahl von Werkstoffen
  • Prüfung von unterschiedlichen Stählen und Nichteisen-Metallen auf ihre Verwendbarkeit im Hinblick auf schweißtechnische Arbeiten
  • Entscheidungen über die anzuwendenden Schweißverfahren
  • Kontrolle der Fertigungsprozesse
  • Zusammenarbeit mit den Mitarbeitern und Mitarbeiterinnen der schweißtechnischen Fertigung sowie dem Konstruktionsbüro um Bauteile qualitativ hochwertig und gleichzeitig wirtschaftlich zu produzieren
  • international anerkannte Weiterbildung im Bereich der Schweißtechnik für Ingenieure und Ingenieurinnen

Arbeitsbereiche und orte als SFI:

  • in Metallbaubetrieben
  • im Anlagen-, Maschinen- oder Fahrzeugbau
  • in Unternehmen des Hoch- und Tiefbaus, etwa im Brücken- und Tunnelbau
  • in Ingenieursbüros für technische Fachplanungen bei Überwachungsvereinen (TÜV, DEKRA, SG Inspection)
  • in Verbänden 

Der SFI-Lehrgang nach Richtlinie DVS®-IIW 1170 gliedert sich in drei Teile:

  • Teil 1:
    Durchführung in der vorlesungsfreien Zeit als Blockveranstaltung an einer der beteiligten Hochschulen (2 Wochen theoretischer Unterricht).
  • Teil 2: 
    Durchführung in der vorlesungsfreien Zeit an beteiligten Kursstätten, zur Zeit: 1 Woche ifw Jena und 1 Woche Gothaer Fahrzeugtechnik GmbH (2 Wochen praktischer Unterricht).
  • Teil 3: 
    Es können die Angebote der SLV Halle genutzt werden. Sollten sich mehr als 15 Personen verbindlich für Teil 3 anmelden, dann ist die Durchführung in Thüringen möglich (8 Wochen theoretischer Unterricht).

Zwischen der Schweißtechnischen Lehr- und Versuchsanstalt Halle GmbH (SLV Halle) und der Bauhaus-Universität Weimar wurde eine Kooperationsvereinbarung zur Anerkennung des 1. Teils der Schweißfachingenieurausbildung (SFI-Ausbildung) abgeschlossen.

Die Teile 2 und 3 werden unter Aufsicht und mit Dozenten der SLV Halle an den beteiligten Thüringer Kursstätten bzw. Hochschulen durchgeführt.

Zielgruppe:

  • Studenten einer technischen Fachrichtung im mind. 5. Semester aus Thüringer Hochschulen

Finanzierungsmöglichkeiten:

  • Ratenzahlung über SLV Halle
  • zinsfreies Darlehen über den DVS
  • KfW Studentenkredit 

Rückfragen und Anmeldung:

Bauhaus-Universität Weimar
Fakultät Bau- und Umweltingenieurwissenschaften
Professur Stahl- und Hybridbau
Univ.-Prof. Dr.-Ing. Matthias Kraus

Marienstraße 13D
D-99423 Weimar

Telefon: +49 (0) 36 43/58 44 77
Telefax: +49 (0) 36 43/58 44 75
matthias.kraus[at]uni-weimar.de
www.uni-weimar.de/stahl-hybrid

Technische Universität Ilmenau
Fakultät Maschinenbau
Fachgebiet Fertigungstechnik
Dr.-Ing. Jörg Hildebrand (IWE)

Gustav-Kirchhoff-Platz 2 / NB2240
98693 Ilmenau

Telefon: +49 (0) 36 77/69 38 58
Telefax +49 (0) 36 77/69 16 60
joerg.hildebrand[at]tu-ilmenau.de
www.tu-ilmenau.de/fertigungstechnik

 

 

Praktische Ausbildung

Foto: O. Kopplin
Foto: O. Kopplin
Foto: O. Kopplin
Foto: O. Kopplin